Posters at a glance

Please use the tables for your quick information and an overview to all available posters with a very comfortable search function. A click on the link in each row leads to more detailed information (if available).

If you have any questions or suggestions please do not hesitate to contact us.

Poster

Posters at a glance

Poster

[table “” not found /]

Posters at a glance

Posters at a glance

Poster

Haus der Technik e. V.

© Haus der Technik e.V.

Haus der Technik e. V.

© Haus der Technik e.V.

Poster	Vortrag_Highlight	Titel	Autor	Firma
P1-001		A two layer silicon/graphite anode for higher energy density Li-ion cells	Petros Selinis	Electrical and Computer Engineering Dept., Democritus University of Thrace, Greece
P1-002		Diffusion properties determine the advantage of solid-state sodium batteries	Dr. Frank Tietz Co-Autoren: Qianli Ma, Dina Fattakhova-Rohlfing, Olivier Guillon	Forschungszentrum Jülich GmbH
P1-004		Modeling the chemo-mechanical behavior of all-solid-state batteries	Ph.D. in Aerospace Engineering Elixabete Ayerbe Co-Autoren: Clara Ganuza, Raul Parra, Jorge Morales, María Echeverría	CIDETEC Energy Storage
P1-005		Evaluation of LiNiO2 with minimal cation mixing as a cathode for Li-ion batteries	PhD Fu-Ming Wang	National Taiwan University of Science and Technology
P1-014		I-STATE: Unique Liquid Inorganic Electrolyte technology	Dr. Ronald Gordon Co-Autoren: Dr. Laurent Zinck, Dr. Manuel Weinberger	Innolith
P1-022		In-depth insights into the impact of FEC on lithium metal electrodes by the utilization of an uncontaminated preformed SEI	Dominik Weintz Co-Autoren: Sebastian Kühn, Martin Winter, Isidora Cekic-Laskovic	Helmholtz-Institut Münster, FZ Jülich
P1-023		Vakuum-Technologie für Carbon Black die Trendwende in der Elektromobilität	Carolin Veser	Greif-Velox Maschinenfabrik
P1-024		Impact of dissolved Cu, Al, and Fe impurities on the SEI in lithium-ion batteries in view of recycling	Valerie Mohni Co-Autoren: Dr. Katja Kretschmer, Prof. Dr.-Ing. Daniel Schröder	Technische Universität Braunschweig
P1-025		Design of Mechanically Modified Lithium Metal Anodes Using the Multiphysics Software Tool Comsol	Frederik Püttmann Co-Autoren: Martin Winter, Markus Börner, Philip Niehoff	University of Münster, MEET Battery Research Center
P1-026		Process adaptation for novel metal-polymer-composite current collectors	Christine Oertel Co-Autoren: Christina von Boeselager, Peter Michalowski, Laura Gottschalk, Klaus Dröder, Arno Kwade	Technische Universität Braunschweig Institute for Particle Technology
P1-027		Tailormade amorphous carbons as negative material for sodium ion batteries	Tim-Patrick Fellinger Co-Autoren: Paul Appel, Shu-Han Wu, Asad Mehmood, Yuko Matsukawa	Bundesanstalt für Materialforschung und -prüfung (BAM)
P1-028		Liquid to solid ternary electrolyte for safe and high performing Li-metal batteries	Lukas Herbers Co-Autoren: Martin Winter, Peter Bieker	University of Münster, MEET Battery Research Center
P1-029		The influence of LiNO3 on the lithium metal deposition in carbonate-based electrolytes and the electrochemical performance in „zero-excess“ and lithium metal cells	Silvan Stuckenberg Co-Autoren: Marlena Maria Bela, Tjark Thorben Klaus Ingber, Christian-Timo Lechtenfeld, Maximilian Mense, Marian Cristian Stan, Martin Winter, Verena Küpers	University of Münster, MEET Battery Research Center
P1-030		Porous carbon as cathode materials for an organic potassium-oxygen battery	M.Sc. Shikha Singh	RWTH Aachen University
P1-031		Effect of coating adhesive strength on processing behavior and electrochemical performance of water-based anodes for lithium-ion batteries	Katarzyna Pesta Co-Autoren: R. Gordon, A. Hegde, A. Smith, N. Willenbacher	Karlsruher Institut für Technologie
P1-032		Reducing anode-LLZO interface resistance by Ionic liquid-based interlayers	Luigi Faggiano Co-Autoren: Prof. Dr. Stefano Passerini, Dr. Alberto Varzi	Karlsruhe Institute of Technology
P1-033		Fast-charging high-Ni NCM and silicon based lithium Ion batteries	Hannah Bosch	Technische Universität München (TUM)
P1-034		Production-Oriented Modelling and Optimization of Battery Cathodes for maximized Energy Density	Hassan Karaki Co-Autoren: Katja Kretschmer, Daniel Schröder	Technische Universität Braunschweig
P1-035		Understanding the influence of binding agent features on LiNi0.6Mn0.2Co0.2O2-based positive electrode concerning the surface characteristics of the active material by varying the polyvinylidene difluoride properties	Johanna Kauling Co-Autoren: Martin Winter, Markus Börner	WWU-Münster
P1-036		Ca2V2O7 as an anode-active material for lithium-ion batteries: Effect of conductive additive and mass loading on the electrochemical performance	Dr. Leticia Trezecik Silvano Co-Autoren: Pinar Kaya, Volker Knoblauch, Marilena Valadares Folgueras, Eder Carlos Ferreira de Souza, Jens Sandherr	Hochschule Aalen
P1-037		Enhanced performance of lithium-iron-phosphate cathodes protected by ultrathin atomic layer deposited films	PhD Prangya Parimita Sahoo	Slovak Academy of Sciences
P1-038		Multidimension model depicting the electrochemical reaction-induced dynamic pH response of zinc-ion batteries in the presence of buffer substances	M. Sc. Julia Pross-Brakhage Co-Autoren: Jessica Hemmerling, Tina Kreher, Kai Peter Birke	Institut für Photovoltaik – Universität Stuttgart
P1-039		Amorphous Silicon/Carbon Composite Anode Materials for Li-Ion Batteries from a Scalable and Continuous One-Step Gas Phase Process	M. Sc. Moritz Loewenich Co-Autoren: Hans Orthner, Hartmut Wiggers	Universität Duisburg-Essen
P1-040		The sustainable fabrication of LFP cathode by implementing the aqueous processing with binder combination of CMC and SBR	Chirag Arunbhai Vankani Co-Autoren: Atif Javed, Martin Winter, Markus Börner	University of Münster, MEET Battery Research Center
P1-041		High-throughput in battery material research – a case study for cathode active materials	Dr. Charlotte Fritsch Co-Autoren: Daniel Jalalpoor, Christoph Ariaans, Denis Hürtgen	hte GmbH
P1-042		Defining Aging Marker Molecules of Sultone-based Electrolyte Additives for Targeted Identification in Spent Lithium-Ion Batteries	Christian Lechtenfeld Co-Autoren: C. Peschel, S. van Wickeren, A. Bloch, M. Winter, S. Nowak	University of Münster, MEET Battery Research Center
P1-043		Interface design for positive active material LiNi0.6Mn0.2Co0.2O2 via Al2O3-coatings using magnetron sputtering for improved electrochemical performance and safety properties.	Atif Javed Co-Autoren: Ardavan Makvandi, Feleke Demlash, Egy Adhitama, Martin Winter, and Markus Börner*	WWU Münster
P1-044		Revealing the beneficial effects of Multiwalled Carbon Nanotubes (MWCNTs) as conductive additive material in prelithiated Si/C blend anodes for lithium ion batteries	MSc Leyla Ünal Co-Autoren: Viviane Maccio-Figgemeier, Gebrekidan Gebresilassie Eshetu, Egbert Figgemeier	Forschungszentrum Jülich
P1-045		A modified Doyle-Fuller-Newman model for the physical simulation of dual-ion batteries	Master of Science Alessandro Innocenti Co-Autoren: Isaac Álvarez Moisés, Jean-François Gohy, Stefano Passerini	Karlsruhe Institute for Technology
P1-046		Investigations on the improvement of the cycling behavior of lithium metal electrodes in combination with slurry-based sulfdic electrolyte layers	M. Sc. Tina Kreher Co-Autoren: Julia Pross-Brakhage, Jessica Hemmerling, Kai Peter Birke	Universität Stuttgart – Institut für Photovoltaik
P1-047		Dispersing Carbon Black in Cathode Slurries – a Numerical Approach	M.Sc. Felix Möhlen Co-Autoren: B. Finke, J. Mayer, C. Schilde, A. Kwade	Institute for Particle Technology (iPAT)
P1-049		Cost and performance analysis as a valuable tool for battery research: the case of the optimization of the low cut-off voltage of sodium-ion battery cells	Simon Beringer Co-Autoren: Alessandro Innocenti, Stefano Passerini	Karlsruhe Institute for Technology
P1-050		Microstructural Evolution and Ionic Conductivity Measurements of Li7La3Zr2O12 (LLZO) Solid Electrolyte Manufactured by Cold Sintering Process	PhD Student Aras Karapekmez Co-Autoren: Dr. Gulin Vardar	Bogazici University
P1-051		Direct observation of Mn2+/MnO2 redox chemistry through in situ optical microscopy	PhD Huan Wang	KTH
P1-052		Impact of Volume Changes on Porosity and Mass Transport	Axel Durdel Co-Autoren: Andreas Aufschläger, Sven Friedrich, Andreas Jossen	Technical University of Munich, Chair of Electrical Energy Storage Technology
P1-054		Solid polymer electrolyte degradation products characterized by chromatographic techniques	DR. Jaroslav Minář Co-Autoren: Jaroslav Minář, Yi-Hsuan Chen, Lukas Herbers, Martin Winter, Gunther Brunklaus, Simon-Wiemers Meyer, Sascha Nowak	University of Münster, MEET Battery Research Center
P1-055		Changes in the Structural Integrity of Ni-rich Layered Oxide Cathodes during Direct Recycling	Maike Michelle Gnutzmann Co-Autoren: Martin Winter, Tobias Placke, Richard Schmuch and Aurora Gomez-Martin	Universität Münster
P1-056		Active Materials Blends for ultra-high Capacity Cathodes used in high Energy Density Lithium-Ion Batteries	Master of Science Mario Maunz	Zentrum für Sonnenenergie- und Wasserstoffforschung (ZSW)
P1-057		An Artificially Stabilized Lithium-Aluminum Alloy Anode for a High-Energy Cobalt-free Lithium Battery	Master of Science Kathrin Schad	Fraunhofer Institute for Manufacturing Engineering and Automation IPA