Save the date:
Batterietagung 2023
April 26-28, 2023 in Aachen/Germany

Poster und Vorträge im Überblick

Einen Überblick zu alle Postern und Vorträgen der Online-Bibliothek erhalten Sie in der tabellarischen Übersicht. Ein Klick auf den Link in jeder Zeile führt zu einer Kurzbeschreibung des Autors, sofern sie hochgeladen wurde. Nutzen Sie auch die komfortablen Filterfunktionen.

Bei Fragen oder Anregungen kontaktieren Sie uns bitte.

Poster und Vorträge im Überblick

Poster
Vorträge

Poster

Poster
P1-001


Petros Selinis
Electrical and Computer Engineering Dept., Democritus University of Thrace, Greece

A two layer silicon/graphite anode for higher energy density Li-ion cells
P1-002


Dr. Frank Tietz
Co-Autoren:
Qianli Ma, Dina Fattakhova-Rohlfing, Olivier Guillon
Forschungszentrum Jülich GmbH

Diffusion properties determine the advantage of solid-state sodium batteries
P1-004


Ph.D. in Aerospace Engineering Elixabete Ayerbe
Co-Autoren:
Clara Ganuza, Raul Parra, Jorge Morales, María Echeverría
CIDETEC Energy Storage

Modeling the chemo-mechanical behavior of all-solid-state batteries
P1-005


PhD Fu-Ming Wang
National Taiwan University of Science and Technology

Evaluation of LiNiO2 with minimal cation mixing as a cathode for Li-ion batteries
P1-006


PhD Gebrekidan Gebresilassie Eshetu
Co-Autoren:
Heng Zhang, Xabier Judez, Henry Adenusid, Michel Armand, Stefano Passerini, and Egbert Figgemeier
RWTH

High-Energy Li-Ion Batteries Comprising Silicon-Containing anodes and Insertion-Type Cathodes
P1-007


Houssin Wehbe
Co-Autoren:
Lars O. Schmidt, Maja W. Kandula, Klaus Dilger
TU Braunschweig - Institut für Füge- und Schweißtechnik

Layered Application and Laser Sintering of Ceramic Solid Electrolyte for Next Generation Batteries
P1-008


M. Sc. Lars Oliver Schmidt
Co-Autoren:
Houssin Wehbe, Klaus Dilger and Maja W. Kandula
TU Braunschweig, Institut für Füge- und Schweißtechnik

Suitability of Magnetron Sputtering Processes for Prelithiation of Graphite-Silicon Anodes
P1-009


Gereon Stahl
Co-Autoren:
Morian Sonnet, Felix Hildenbrand, Martin Graff, Dirk Uwe Sauer
RWTH Aachen

Electrolyte Optimisation via Float-Current Measurement for High-Nickel/Graphite-SiOx Cells
P1-010


Dr.rer.nat. Helene (ifs)
Co-Autoren:
Helene Jeske, Huize Cheng, Lin Li, Ayse Yarangünü, Klaus Dilger and Maja Kandula
TU Braunschweig, Insitute of Joining and Welding

Alternative binders and solvent for cathode application in Lithium-ion batteries
P1-011


Philip Daubinger
Co-Autoren:
Mara Göttlinger, Sarah Hartmann, Guinevere A. Giffin
Fraunhofer Institute for Silicate Research ISC

Interplay of Pressure and Electrolyte on the (Ir)Reversible Expansion of State-of-the-Art and Next-Generation Battery Materials using Operando Dilatometry
P1-012


Jonas Oehm
Co-Autoren:
Amir Haghipour, Veit Königer, Mareike Negovec, Milena Perovic, Philip Gümbel, Klaus Dröder, Arno Kwade, Volker Presser, Volker Knoblauch, Tobias Kraus
Aalen University - Materials Research Institute

On the electrochemical performance of different cathode active materials and electrode microstructures as a basis for a digital data management platform
P1-013


Friedrich Sven
Co-Autoren:
A. Durdel, C. Sayilgan, A. Jossen
Technical University Munich

Fast-Charing of Silicon-Anode, Nickel-Rich Cathode Lithium-Ion Batteries using Physicochemical and Thermal Modeling
P1-014


Dipl.-Ing. (FH) Markus Borck
Co-Autoren:
Dr. Laurent Zinck, Dr. Manuel Weinberger
Innolith

I-STATE: Unique Liquid Inorganic Electrolyte technology
P1-015


Dr. Mirco Ruttert
Co-Autoren:
Dr. Ralf Wagner, Sebastian Staiger
E-Lyte Innovations GmbH

Systematic electrolyte development for high-energy lithium-ion batteries containing silicon-based anodes and nickel-rich cathodes
P1-016


Mattis Batzer
Co-Autoren:
Peter Michalowski, Arno Kwade
Technische Universität Braunschweig, Institut für Partikeltechnik

Continuous processing of separator and cathode suspensions for sulfidic solid-state batteries
P1-017


M. Sc. Tobias Neumann
Co-Autoren:
Timo Kaitinnis, Maximilian Schmucker, Ingo Krossing und Daniel Biro
Fraunhofer Institut für Solare Energiesysteme ISE

Development of thin-film Separators for Sulfide based All-Solid-State-Batteries
P1-018


Sebastian Klick
Co-Autoren:
Gereon Stahl, Dirk Uwe Sauer
ISEA, RWTH Aachen

The Influence of Electrolyte Volume on Degradation and Capacity Fade of Lithium Ion Batteries
P1-019


Sebastian P. Kühn
Co-Autoren:
Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich GmbH

Impact of In Coin Cell Atmosphere on Lithium Metal Electrode Performance
P1-020


M.Sc. Elias Reisacher
Co-Autoren:
Pinar Kaya, Volker Knoblauch
Hochschule Aalen

Favourable Composition of a Thiophosphate-Based Catholyte for Electronic and Ionic Conduction in All-Solid-State Battery Cathodes
P1-021


M.Sc. Alper Güneren
Co-Autoren:
A. Nada, Z. Lenčéš, K. Fröhlich
Slovak Academy of Sciences

Stabilization of silicon-graphite blended anode performance using self-healing binders
P1-022


Dominik Weintz
Co-Autoren:
Sebastian Kühn, Martin Winter, Isidora Cekic-Laskovic
Helmholtz-Institut Münster, FZ Jülich

In-depth insights into the impact of FEC on lithium metal electrodes by the utilization of an uncontaminated preformed SEI
P1-023


Carolin Veser
Greif-Velox Maschinenfabrik

Vakuum-Technologie für Carbon Black die Trendwende in der Elektromobilität
P1-024


Valerie Mohni
Co-Autoren:
Dr. Katja Kretschmer, Prof. Dr.-Ing. Daniel Schröder
Technische Universität Braunschweig

Impact of dissolved Cu, Al, and Fe impurities on the SEI in lithium-ion batteries in view of recycling
P1-025


Frederik Püttmann
MEET Batterieforschungszentrum

Design of Mechanically Modified Lithium Metal Anodes Using the Multiphysics Software Tool Comsol
P1-026


Christine Oertel
Co-Autoren:
Christina von Boeselager, Peter Michalowski, Laura Gottschalk, Klaus Dröder, Arno Kwade
Technische Universität Braunschweig Institute for Particle Technology

Process adaptation for novel metal-polymer-composite current collectors
P1-027


Tim-Patrick Fellinger
Co-Autoren:
Paul Appel, Shu-Han Wu, Asad Mehmood, Yuko Matsukawa
Bundesanstalt für Materialforschung und -prüfung (BAM)

Tailormade amorphous carbons as negative material for sodium ion batteries
P1-028


Lukas Herbers
MEET

Liquid to solid ternary electrolyte for safe and high performing Li-metal batteries
P1-029


Silvan Stuckenberg
Co-Autoren:
Marlena Maria Bela, Tjark Thorben Klaus Ingber, Christian-Timo Lechtenfeld, Maximilian Mense, Marian Cristian Stan, Martin Winter, Verena Küpers
MEET Battery Research Center, Universität Münster

The influence of LiNO3 on the lithium metal deposition in carbonate-based electrolytes and the electrochemical performance in „zero-excess“ and lithium metal cells
P1-030


M.Sc. Shikha Singh
RWTH Aachen University

Porous carbon as cathode materials for an organic potassium-oxygen battery
P1-031


Katarzyna Pesta
Co-Autoren:
R. Gordon, A. Hegde, A. Smith, N. Willenbacher
Karlsruher Institut für Technologie

Effect of coating adhesive strength on processing behavior and electrochemical performance of water-based anodes for lithium-ion batteries
P1-032


Luigi Faggiano
Co-Autoren:
Prof. Dr. Stefano Passerini, Dr. Alberto Varzi
Karlsruhe Institute of Technology

Reducing anode-LLZO interface resistance by Ionic liquid-based interlayers
P1-033


Hannah Bosch
Technische Universität München (TUM)

Fast-charging high-Ni NCM and silicon based lithium Ion batteries
P1-034


Hassan Karaki
Co-Autoren:
Katja Kretschmer, Daniel Schröder
Technische Universität Braunschweig

Production-Oriented Modelling and Optimization of Battery Cathodes for maximized Energy Density
P1-035


Johanna Kauling
Co-Autoren:
Martin Winter, Markus Börner
WWU-Münster

Understanding the influence of binding agent features on LiNi0.6Mn0.2Co0.2O2-based positive electrode concerning the surface characteristics of the active material by varying the polyvinylidene difluoride properties
P1-036


Dr. Leticia Trezecik Silvano
Co-Autoren:
Pinar Kaya, Volker Knoblauch, Marilena Valadares Folgueras, Eder Carlos Ferreira de Souza, Jens Sandherr
Hochschule Aalen

Ca2V2O7 as an anode-active material for lithium-ion batteries: Effect of conductive additive and mass loading on the electrochemical performance
P1-037


PhD Prangya Parimita Sahoo
Slovak Academy of Sciences

Enhanced performance of lithium-iron-phosphate cathodes protected by ultrathin atomic layer deposited films
P1-038


M. Sc. Julia Pross-Brakhage
Co-Autoren:
Jessica Hemmerling, Tina Kreher, Kai Peter Birke
Institut für Photovoltaik - Universität Stuttgart

Multidimension model depicting the electrochemical reaction-induced dynamic pH response of zinc-ion batteries in the presence of buffer substances
P1-039


M. Sc. Moritz Loewenich
Co-Autoren:
Hans Orthner, Hartmut Wiggers
Universität Duisburg-Essen

Amorphous Silicon/Carbon Composite Anode Materials for Li-Ion Batteries from a Scalable and Continuous One-Step Gas Phase Process
P1-040


Chirag Arunbhai Vankani
Co-Autoren:
Atif Javed, Martin , Markus Börner
MEET, Münster

The sustainable fabrication of LFP cathode by implementing the aqueous processing with binder combination of CMC and SBR
P1-041


Dr. Charlotte Fritsch
Co-Autoren:
Daniel Jalalpoor, Christoph Ariaans, Denis Hürtgen
hte GmbH

High-throughput in battery material research - a case study for cathode active materials
P1-042


Christian Lechtenfeld
Co-Autoren:
C. Peschel, S. van Wickeren, A. Bloch, M. Winter, S. Nowak
MEET Batterieforschungszentrum

Defining Aging Marker Molecules of Sultone-based Electrolyte Additives for Targeted Identification in Spent Lithium-Ion Batteries
P1-043


Atif Javed
Co-Autoren:
Ardavan Makvandi, Feleke Demlash, Egy Adhitama, Martin Winter, and Markus Börner*
WWU Münster

Interface design for positive active material LiNi0.6Mn0.2Co0.2O2 via Al2O3-coatings using magnetron sputtering for improved electrochemical performance and safety properties.
P1-044


MSc Leyla Ünal
Co-Autoren:
Viviane Maccio-Figgemeier, Gebrekidan Gebresilassie Eshetu, Egbert Figgemeier
Forschungszentrum Jülich

Revealing the beneficial effects of Multiwalled Carbon Nanotubes (MWCNTs) as conductive additive material in prelithiated Si/C blend anodes for lithium ion batteries
P1-045


Master of Science Alessandro Innocenti
Co-Autoren:
Isaac Álvarez Moisés, Jean-François Gohy, Stefano Passerini
Karlsruhe Institute for Technology

A modified Doyle-Fuller-Newman model for the physical simulation of dual-ion batteries
P1-046


M. Sc. Tina Kreher
Co-Autoren:
Julia Pross-Brakhage, Jessica Hemmerling, Kai Peter Birke
Universität Stuttgart - Institut für Photovoltaik

Investigations on the improvement of the cycling behavior of lithium metal electrodes in combination with slurry-based sulfdic electrolyte layers
P1-047


M.Sc. Felix Möhlen
Co-Autoren:
B. Finke, J. Mayer, C. Schilde, A. Kwade
Institute for Particle Technology (iPAT)

Dispersing Carbon Black in Cathode Slurries – a Numerical Approach
P1-048


Ph.D. Vijay Rangasamy
Co-Autoren:
Dr. Ir. Annick Vanhulsel
VITO

Lithium metal passivation by atmospheric-pressure plasma
P1-049


Simon Beringer
Co-Autoren:
Alessandro Innocenti, Stefano Passerini
Karlsruhe Institute for Technology

Cost and performance analysis as a valuable tool for battery research: the case of the optimization of the low cut-off voltage of sodium-ion battery cells
P1-050


PhD Student Aras Karapekmez
Co-Autoren:
Dr. Gulin Vardar
Bogazici University

Microstructural Evolution and Ionic Conductivity Measurements of Li7La3Zr2O12 (LLZO) Solid Electrolyte Manufactured by Cold Sintering Process
P1-051


PhD Huan Wang
KTH

Direct observation of Mn2+/MnO2 redox chemistry through in situ optical microscopy
P1-052


Axel Durdel
Co-Autoren:
Andreas Aufschläger, Sven Friedrich, Andreas Jossen
Technical University of Munich, Chair of Electrical Energy Storage Technology

Impact of Volume Changes on Porosity and Mass Transport
P1-054


Doctoral Jaroslav Minář
Co-Autoren:
Jaroslav Minář, Yi-Hsuan Chen, Lukas Herbers, Martin Winter, Gunther Brunklaus, Simon-Wiemers Meyer, Sascha Nowak
University of Münster, MEET Battery Research Center

Solid polymer electrolyte degradation products characterized by chromatographic techniques
P1-055


Maike Michelle Gnutzmann
Co-Autoren:
Martin Winter, Tobias Placke, Richard Schmuch and Aurora Gomez-Martin
Universität Münster

Changes in the Structural Integrity of Ni-rich Layered Oxide Cathodes during Direct Recycling
P1-056


Master of Science Mario Maunz
Zentrum für Sonnenenergie- und Wasserstoffforschung (ZSW)

Active Materials Blends for ultra-high Capacity Cathodes used in high Energy Density Lithium-Ion Batteries
P1-057


Master of Science Kathrin Schad
Fraunhofer Institute for Manufacturing Engineering and Automation IPA

An Artificially Stabilized Lithium-Aluminum Alloy Anode for a High-Energy Cobalt-free Lithium Battery
P1-058


PhD Letian Li
Co-Autoren:
Lin Jiang, Zhao Liu, Brandon van Leer
Thermo Fisher Scientific

New method to characterise Li metal and SEI layer with Atomic resolution with inert gas transfer and Cryo-FIB
P1-059


Master of Science Daniel Reichert
Co-Autoren:
Kai Peter Birke (1,2) (1) Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Nobel Str. 12, 70569 Stuttgart, Germany (2) Chair for Electrical Energy Storage Systems, Institute for Photovoltaics, University of Stuttgart, Pfaffenwaldring 47, 70569 Stuttgart, Germany
Fraunhofer Institute for Manufacturing Engineering and Automation IPA

Research fronts and trends of sodium-ion batteries: A bibliometric analysis
P1-060


Marco Lüther
Co-Autoren:
Aurora Gomez-Martin, Shi-Kai Jiang, Richard Schmuch, Tobias Placke, Bing Joe Hwang, Martin Winter
MEET Battery Research Center

Is the ‘single-crystal’ approach really feasible for Ni-rich layered oxides? – A fair and realistic performance comparison in NCM||Graphite coin cells
P1-061


Dr.-Ing. Kevin Voges
Co-Autoren:
Peter Michalowski, Arno Kwade
Technische Universität Braunschweig

Fluidized bed process for the application of protective coatings on cathode active material particles for solid-state batteries
P1-062


Daniel Möhrle
Co-Autoren:
Max Schammer, Birger Horstmann, Arnulf Latz
Institut für Technische Thermodynamik, Deutsches Zentrum für Luft- und Raumfahrt (DLR)

Continuum-Scale Transport Model for Polymer Electrolytes in All-Solid-State-Batteries
P1-063


Sebastian Kirchhoff
TU Dresden

Electrolyte design for high power application of real world Lithium-Sulfur pouch cells
P1-064


Dr. Karol Frohlich
Co-Autoren:
P. P. Sahoo, A. Güneren, A. Nada, M. Precnerová, B. Hudec
Centre for Advanced Materials Application SAS

Artificial solid-electrolyte-interphase layer on silicon/graphite anode formed by atomic layer deposited ZnO films
P1-065


Maike Leopold
Co-Autoren:
Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich

Multifunctional electrolyte components for high-voltage LNMO-based cell chemistry
P1-066


Jonas Buch
Co-Autoren:
Moritz Damm, Philipp Ganninger, Rouven Leskow, Dr.-Ing. David Henriques
Mannheim University of Applied Sciences

Simulation of the heat generation in a LiFePO4 coin cell battery based on self-measured materials data validated by experimental heat flux measurements
P1-067


Kevin Böhm
Co-Autoren:
Philipp Ganninger; Felix Heeger; Dr.-Ing. David Henriques
Mannheim University of Applied Sciences

Investigation of the heat generation before and after aging of lithium-ion-batteries with silicon-based anodes containing high amount of crystalline or amorphous silicon
P1-068


M.Eng. Minji Han
Co-Autoren:
Marlena Maria Bela, Aurora Gomez Martin, Richard Schmuch, Tobias Placke, Martin Winter
MEET Battery Research Center

Stabilisation of Ni-rich layered oxide cathodes for high energy Lithium-ion batteries via Atomic Layer Deposition coating approach
P1-069


Bahareh A. Sadeghi
Co-Autoren:
Christian Wölke, Felix Pfeiffer, Masoud Baghernejad, Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich GmbH

Big impact starts small: Boosting VC containing electrolyte with phospholane additive for advanced NMC811||Si-graphite cell performance
P1-070


Nick Fehlings
Co-Autoren:
Christoph Peschel, Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
MEET - Münster Electrochemical Energy Technology

Identification of aging phenomena emerging in lithium-sulfur-battery electrolytes
P1-071


PhD Jie Lin
Co-Autoren:
Siyu Zhao, Thomas G. Tranter, Dan Brett, Rhodri Jervis, Paul R. Shearing
University College London

Insights into Nb2O5 anode for lithium-ion batteries
P1-072


Stefan van Wickeren
Co-Autoren:
Sascha Nowak, Martin Winter, Simon Wiemers-Meyer
MEET - Battery Research Center

Insights into catalytic effects of transition metal dissolution on electrolyte decomposition in lithium-ion batteries
P1-073


Master of Science (M.Sc.) Fatjon Maxharraj
Co-Autoren:
Anton Werwein, Kristian Nikolowski, Mareike Partsch, Alexander Michaelis
Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

Aqueous based cathodes with LiPAA-Alginate blended binder
P1-074


M.Sc. David Schmider
Co-Autoren:
Wolfgang G. Bessler
Hochschule Offenburg

Modeling and experimental validation of thickness change of a lithium-ion pouch cell with blend cathode
P1-075


Yulia Trenikhina
Co-Autoren:
Stephen Kelly, Sarah Reeb, Benjamin Tordoff, Markus Boese
Carl Zeiss X-ray Microscopy

The impact of 3D microscopy strategies on computational analysis for battery research
P1-076


Dr. Christoph Müller
Grillo-Werke AG

Innovative zinc materials for energy storage systems
P1-077


Dr. Ulf Breddemann
Co-Autoren:
Dr.-Ing. Krum Banov, Dr. Miriam Khodeir, Prof. Dr.-Ing. Petr Novák
Technische Universität Braunschweig

Understanding the transition metal contamination in electrolytes for lithium-ion batteries
P1-078


Dr. Naoki Matsuoka
Co-Autoren:
Mr. Makoto Ito (Asahi Kasei Corporation)
Asahi Kasei Europe GmbH

Optimized synthesis of cyclic fluorinated sulfonylimide lithium salts to suppress aluminum corrosion in lithium-ion batteries
P1-079


Güldeniz Tonbul
Co-Autoren:
Julian Kappler, Saravanakumar Murugan, Roland Schoch, Michal Nowakowski, Pia Lange, Matthias Bauer, Michael R. Buchmeiser
Universität Paderborn

Characterization of Na-S Battery System Using X-ray Absorption Spectroscopy
P1-080


Simon Albers
Co-Autoren:
Martin Winter, Johannes Kasnatscheew
Westfälische Wilhelms-Universität Münster

Sustainable multifunctional binder for aqueous processing of Ni-rich layered oxides cathodes towards industrial parameters
P1-081


Dr. Linas Vilciauskas
Co-Autoren:
Jurgis Pilipavičius, Milda Petrulevičienė, Jurga Juodkazytė, Davit Tediashavili, Gintarė Gečė, Denis Gryaznov
Center for Physical Sciences and Technology (FTMC)

Towards the development of sustainable aqueous Na-ion batteries
P1-082


PhD Krum Banov
Co-Autoren:
Dr. Ulf Breddermann, Dr. Miriam Khodier, Prof. Dr.-Ing Petr Novak
Institute of Energy and Process Systems Engineering, TU Braunschweig

Influence of impurities in the electrolyte on the electrochemical performance of oxide-based LIB cathode materials
P1-083


Dr.-Ing. Michael Hein
Co-Autoren:
Dipl.-Phys. Olaf Bielmeier, Dr.-Ing. Ansgar Damm, Dr. Robert Braun
HOERBIGER Antriebstechnik Holding GmbH

Innovative prismatic cell housings and cell lids for future battery cells
P1-084


Pauline Huang
Co-Autoren:
Lin Jiang, Zhao Liu, Brandon van Leer
Thermo Fisher Scientific

New method to characterise Li metal and SEI layer with Atomic resolution with inert gas transfer and Cryo-FIB
P2-001


Steven Neupert
Co-Autoren:
Julia Kowal
Technische Universität Berlin

Load Cycle Analysis and the Design of Realistic Battery Cell Load Profiles
P2-002


M.Sc. Christian Weisenberger
Co-Autoren:
A. Lindner, E. Barbosa Sá, Ute Golla-Schindler, K. Kukla, S. Abdolhosseini, M. Flügel, R. Schäfer, M. Feinauer, S. Both, T. Danner, A. Latz, W. Menesklou, T. Waldmann, M. Wohlfahrt-Mehrens, V. Knoblauch
Aalen University

A Best Practice Workflow for Multiscale Characterization and Simulation for Lithium-ion Batteries – Utilizing Complimentary Methods to Reveal the Microstructural, Chemical and Electrochemical Properties of a Commercial High-Energy 21700 Cell
P2-003


Dr Ute Golla-Schindler
Co-Autoren:
J. Niedermeyer ,E. Barbosa Sa, C. Weisenberger, V. Knoblauch, G. Schneider
University Aalen

Prospects and limits for quantitative Energy dispersive X-ray spectroscopy (EDS) applied Li Ion batteries
P2-004


Dr. rer. nat. Thomas Waldmann
Co-Autoren:
Rares-George Scurtu, Christin Hogrefe, Margret Wohlfahrt-Mehrens
ZSW – Zentrum für Sonnenenergie- und Wasserstoff-Forschung, Baden-Württemberg

Positive Effects of Tab Design in Cylindrical Li-ion Cells – A Systematic Study on Pilot-Scale
P2-005


PhD Filippos Farmakis
Co-Autoren:
Anestis Topalidis, George Zardalidis, Stamatios Asimis
Electrical and Computer Engineering Dept.

In-operando monitoring of internal pressure in lithium-ion batteries
P2-006


Nury Orazov
Co-Autoren:
Ralf Benger, Heinz Wenzl, Ingo Koch
Technische Universität Clausthal

Increasing the safety of lithium-ion cells through pressure-controlled gas removal
P2-007


PhD Saeed Yari
Co-Autoren:
Lowie Henderick , Christophe Detavernier , Mohammadhosein Safari
Imo-imomec/Hasselt University

On the spatial distribution of polysulfide traps in the porous electrode for Li-S batteries
P2-008


M. Sc. Jens Grabow
Co-Autoren:
Ralf Benger, Ines Hauer und Hans-Peter Beck
TU Clausthal

Impurity particle contamination in lithium-ion batteries - a risk for safety-critical internal short circuits
P2-009


Christin Hogrefe
Co-Autoren:
Markus Hölzle, Margret Wohlfahrt-Mehrens, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)

Direct Observations of Graphite Anode Lithiation and Internal Short Circuits by Li Metal Deposition using Cross-Sectional in situ Optical Microscopy in Li-Ion Full Cells
P2-010


Erfan Moyassari
Co-Autoren:
Andreas Jossen
Technical University of Munich

Modelling the Current-Distribution between Silicon and Graphite in Silicon-Based Blend Anode with Different Silicon Ratios
P2-011


M.Sc. Leonard Jahn
Co-Autoren:
Tom Rüther, Christian Plank, Sanaz Banifarsi, Abdelaziz A. Abd-El-Latif, Margret Wohlfahrt-Mehrens, Michael A. Danzer
University of Bayreuth

Challenges of next-generation battery energy storage systems with silicon anodes
P2-012


Christiane Rahe
Co-Autoren:
Johannes Sordon, Dirk Uwe Sauer
ISEA RWTH Aachen

Determination of the size of the anode overhang as quality control
P2-013


Lisa Cloos
Co-Autoren:
Oliver Queisser, Sabrina Herberger, Thomas Wetzel
Karlsruhe Institute of Technology (KIT)

Thermal acceleration of Li-ion battery aging
P2-014


Jens Sandherr
Aalen University of Applied Sciences

Graphite anodes for lithium-ion batteries with improved fast-charging capability achieved by laser surface modification and micro embossing
P2-015


Christian Plank
Co-Autoren:
Tom Rüther, Michael A. Danzer
Universität Bayreuth

Investigation of impedance spectra of systems with distinctive resistive-inductive behavior using the generalized distribution of relaxation times analysis
P2-016


Sabri Baazouzi
Co-Autoren:
Prof. Dr. Kai Peter Birke; Julian Grimm
Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA

Cylindrical Li-ion battery cells - Design trends and manufacturing solutions
P2-017


Florian Krause
Co-Autoren:
Dirk Uwe Sauer
RWTH Aachen - ISEA

Möglichkeiten von faseroptischen Messungen in Lithium-Ionen-Zellen
P2-018


David Wasylowski
Co-Autoren:
Morian Sonnet, Heinrich Ditler, Tim Falkenstein, Sven Neubauer, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Scanning Acoustic Tomography as a Tool for Early Defect Detection during Lithium-Ion Battery Manufacturing
P2-019


Dr.-Ing. Alexander Gitis
Co-Autoren:
Hendrik Zappen, Georg Fuchs
Safion GmbH

RT-EIS characterization as an economic and ecological alternative for battery testing
P2-020


Florian Ströbl
Co-Autoren:
Florian Schaeufl, Oliver Bohlen, Herbert Palm
Hochschule München

Data Handling for Battery Aging Studies
P2-021


M.Sc. Alexander Karger
Co-Autoren:
Andreas Jossen
Technische Universität München

Empirical modeling of degradation mode evolution during lithium-ion battery aging
P2-022


Assoc. Prof. Burak Ülgüt
Co-Autoren:
Gözde Karaoğlu, Gökberk Katırcı
Bilkent University

Operando Investigations on Metallic Lithium: Electrochemical Noise and Temperature-Dependent EIS
P2-023


Alexander Hahn
Co-Autoren:
Kwade, Arno
TU Braunschweig, Institut für Partikeltechnik

Short circuit prediction in Li-ion batteries using separator pre-tests
P2-024


Marius Bolsinger
Co-Autoren:
Christian Weisenberger, Mark Kamlah, Volker Knoblauch,
Hochschule Aalen - Institut für Materialforschung

Combination of high-resolution light microscopy under inert gas atmosphere and machine learning-based phase analysis for quantification of Li intercalation compounds and Li plating on graphite and Si/C composite anodes
P2-025


Morian Sonnet
Co-Autoren:
Alexander Blömeke, Claire Villevieille, Sandrine Lyonnard, Philipp Dechent, Dirk Uwe Sauer
RWTH Aachen

Correlating cheap sensors with large scale research facilities
P2-026


Daniel Luder
Co-Autoren:
Jipu Mao, Stephan Bihn, Dirk Uwe Sauer and Weihan Li
RWTH Aachen University | ISEA

Time- and Frequency-Domain Global Sensitivity Analysis of the Electrochemical Battery Model
P2-027


M.Sc. Heinrich Ditler
Co-Autoren:
Dirk Uwe Sauer
RWTH ISEA

Multiscale identification and validation of lithium plating in lithium-ion batteries via post-mortem analyses
P2-028


Hendrik Laufen
Co-Autoren:
Sascha Berg, Julian Engeser, Dirk Uwe Sauer
Institut für Stromrichtertechnik und Elektrische Antriebe (ISEA)

Pressure induced cyclic lifetime prolongation by fifty percent compared to non-pressure-loaded lithium-ion pouch cell
P2-029


Ph.D. Simon O'Kane
Co-Autoren:
Shen Li (lead author), Niall Kirkaldy, Gregory Offer, Monica Marinescu
Imperial College London

Modelling inhomogeneous lithium plating with a distributed equivalent circuit network
P2-030


Dominik Droese
Co-Autoren:
Julia Kowal
TU Berlin

Comparison of the Thermal Behavior of Different Cell Topologies by Using Standardized Thermal Impedance Spectroscopy Measurements
P2-031


Julian Engeser
Co-Autoren:
Prachiti Bedadur, Sascha Berg, Hendrik Laufen, Adrian Heuer, Egbert Figgemeier, Luciana Pitta Bauermann, Matthias Vetter
Fraunhofer-Institut für Solare Energiesysteme ISE

Locally provoked cell aging using different pressure profiles at 60% DOD
P2-032


M. Sc. Torben Jennert
Co-Autoren:
Michael Kurrat
TU Braunschweig

Investigation of battery cells during thermal runaway using electrochemical impedance spectroscopy
P2-033


PhD Abdelaziz Abdellatif
Co-Autoren:
Peter Sichler, Max Feinauer, Margret Wohlfahrt-Mehrens, Thomas Waldmann
ZSW

ARC-MS study for commercial 21700 lithium-ion cells: state of charge effect
P2-034


Kai Schofer
Co-Autoren:
Jochen Bandlow and Kai Peter Birke
Mercedes-Benz AG

In-situ detection and characterization of lithium deposition in lithium-ion cells for lifetime-oriented optimization of fast charging
P2-035


B.Tech + M.Tech in Chemical Engineering SUNIL KUMAR RAWAT
IMPERIAL COLLEGE LONDON

Python-based Equivalent Circuit Network (PyECN): Next generation open-source battery modelling framework for Lithium-ion batteries
P2-036


Dr. Kudakwashe Chayambuka
Co-Autoren:
L. Raijmakers, F. Zhang, D.L. Danilov and R. A. Eichel
Forschungszentrum Jülich

A Graphic User Interface to Determine Electrode Electrochemical Parameters
P2-037


Karsten Geuder
Co-Autoren:
Philipp Finster, Sebastian Klick, Karl Martin Graff, Carlos Ziebert, Hans J. Seifert
Karlsruher Institut für Technologie

Influence of electrolyte additives on calendar aging of Lithium-Ion Batteries under open-circuit and floating SOC conditions
P2-038


MSc Julia Petro
Co-Autoren:
S. Sible, J. Macher, N. Karajan, W.Hahn, M. Göttlinger, M. Schwab, M. Morak, H. Pothukuchi, T. Antretter
Polymers Competence Center Leoben GmbH (PCCL)

Mechanical Characterization and Modeling of Li-ion Battery Cell
P2-039


Marcel Thiele
Co-Autoren:
Dr.-Ing. Ralf Benger
Technische Universität Clausthal

Examination of lithium-ion cells using magnetic field measurements
P2-040


Dion Wilde
Co-Autoren:
Daniel Witt, Mauro Sgroi, Daniel Westhoff, Simon Hein, Timo Danner, Florian Baakes, Arnulf Latz, Ulrike Krewer
Karlsruher Institut für Technologie

Optimal design of high capacity Li-ion battery electrodes for automobile applications
P2-041


Johannes Sordon
Co-Autoren:
Christiane Rahe, Dirk Uwe Sauer
ISEA RWTH Aachen

Determination of the size of the anode overhang as quality control
P2-042


Dr. Ing. Kai K. O. Bär
adphos Innovative Technologies GmbH

BearLITE- processing- a turn point for accelerated, high efficient, ecological sustainable and cost attractive cell production
P2-043


M.Sc. Oliver Landrath
Technische Universität Braunschweig | elenia Institute for High Voltage Technology and Power Systems

Investigations on the upscaling of small-sized three-electrode lithium-ion battery cells to larger-sized multilayer pouch-cells
P2-044


Maximilian Schamel
Co-Autoren:
Michael A. Danzer
Universität Bayreuth

Using a spatially resolved transmission line model for virtual design optimization of battery electrodes by comparing graded and non-graded electrodes
P2-045


M. Sc. Niclas Straßburger
Co-Autoren:
N. Straßburger, P. Zhu, Y. Zheng, W. Pfleging
Karlsruhe Institute of Technology

Ultrafast laser structuring of battery materials as part of a sustainable Li-ion battery production
P2-046


Kato Daems
Co-Autoren:
Joeri Van Mierlo, Maitane Berecibar
Vrije Universiteit Brussel

Novel Multiphysics Model for Advanced Material Solutions for Safer and Long-Lasting High Capacity Cobalt Free Batteries for Stationary Storage Applications (CoFBAT)
P2-047


Robert Leonhardt
Bundesanstalt für Materialforschung und -prüfung (BAM)

Investigation of safety-related parameters of aged Li-ion batteries for the use in second life applications
P2-048


Raphael Mühlpfort
Co-Autoren:
Philipp Seegert, Anne Heß, Thomas Wetzel
Karlsruher Institute of Technology (KIT)

Simulative analysis of the multi-physical behavior of Li-ion cells using electrochemical impedance spectra
P2-049


MEng Waseem Marzook
Co-Autoren:
James Eaton, Gregory Offer and Monica Marinescu
Imperial College London

Performance Benchmarking of Lithium-ion Batteries: The Effect of Test Conditions on the Down-Selection of Cylindrical Cells
P2-050


Yan Ying Lee
Karlsruhe Institute of Technology (KIT) / Institute for Applied Materials – Electrochemical Technologies (IAM-ET)

Electrode-resolved analysis of nonlinearities in NMC/Si-Graphite lithium-ion battery
P2-051


M.Sc. Adrian Lindner
Co-Autoren:
S. Both, M. Schiffler, S. Abdolhosseini, W. Menesklou, T. Danner, A. Latz, U. Krewer
Karlsruher Institut für Technologie

High Resolution Tomography Techniques for the Development and Optimization of Structurally Resolved Battery Simulation – Preparation, Imaging and Analysis
P2-052


M.Sc. Carolyn Reinhold
Co-Autoren:
Alexandra Meyer, Wilhelm Pfleging
Karlsruher Institut für Technologie

Ultrafast Laser Structuring of Generation 3B Electrode Materials for Next Generation Lithium-Ion Batteries
P2-053


Master Sanaz Banifarsi
Co-Autoren:
Abdelaziz A. Abd-El-Latif, Margret Wohlfahrt-Mehrens
Zentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW)

Electrochemical dilatometry of Si-rich anode in the next generation lithium-ion batteries
P2-054


Zhenya Wang
Co-Autoren:
Dmitri L. Danilov, Rüdiger‐A. Eichel, Peter H. L. Notten
Forschungszentrum jülich

On the in-plane distribution of the reaction rate in complete battery stacks
P2-055


Dr. Matthias Morak
Co-Autoren:
Christian Gössweiner, Simon Hudales, Jure Vincovic, Martin Schwab
4a engineering GmbH

High-fidelity characterization methods and automated modeling of Li-ion battery cells
P2-056


Master of Technology Rigved Samant
Co-Autoren:
Resmi Suresh; Raghunathan Rengaswamy
Indian Institute of Technology, Guwahati

Rapid impedance measurement of the battery using chirp signal for online EIS
P2-057


Niklas Bless
Co-Autoren:
Katja Kretschmer, Daniel Schröder
Institut für Energie- und Systemverfahrenstechnik, TU Braunschweig

Investigation of lithium plating and stripping during fast charging of lithium-ion batteries with a physico-chemical modeling approach and optical operando experiments
P2-058


Luiza Streck
Co-Autoren:
Thomas Roth, Sven Friedrich, Alessandro Sommer and Andreas Jossen
Technical University of Munich (TUM)

Impact of Temperature, State of Health, and Voltage on the Analysis of Side Reaction Currents during Voltage Holds for Si/NCA Lithium-Ion Batteries
P2-059


M.Sc. Simon Kücher
Co-Autoren:
Erfan Moyassari, Franz Spingler, Andreas Jossen
TUM

Influence of the Initial Porosity on the Expansion Behavior of Graphite Electrodes in Lithium-Ion Batteries
P2-060


Bennet Timke
Meet Battery Research Center

Effect of Different Amounts of Lithium Plating on Thermal Cell Safety
P2-061


Srivatsan Ramasubramanian
Co-Autoren:
Felix Schomburg, Fridolin Röder
Bavarian Center for Battery Technology

Exploring physical interpretability of neural ODEs with an example for SEI formation
P2-062


Ph.D (Pursuing) Nitika Ghosh
Indian Institute of Technology Delhi

The State of Health estimation using data pre-processing and Machine Learning for effective assessment of Lithium-ion battery health over time Abstract:
P2-063


M.Sc. Philipp Finster
Co-Autoren:
Mohammad Yasseri, Gang Yan, Carlos Ziebert, Hans J. Seifert
Karlsruhe Institute of Technology (KIT)

Gas collection and analysis in Lithium-Ion-Batteries using Accelerating Rate Calorimetry and Gas Chromatography – Mass Spectrometry Methods
P2-064


Merit Holdorf
Co-Autoren:
Prof. Dr.-Ing. Michael Kurrat
TU Braunschweig | elenia - Institute for High Voltage Technology and Energy Systems

Investigating the impact of mechanical pressure on pouch-cell performance during formation and cycling
P2-065


Yaroslava Fedoryshyna
Technical University of Munich, Chair for Electrical Energy Storage Technology

Test Bench Development for Cell Venting Characterisation during Thermal Runaway
P2-066


Max Feinauer
Co-Autoren:
Abdelaziz A. Abd-El-Latif, Peter Sichler, Margret Wohlfahrt-Mehrens, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Influence of temperature dependent aging mechanism on the safety behavior of Li-ion pouch cells
P2-067


M.Sc. Hendrik Pegel
Co-Autoren:
Dominik Wycisk, Arnulf Latz, Dirk Uwe Sauer
Institute for Power Electronics and Electrical Drives (ISEA)

Extensively validated electrochemical-thermal modeling framework for fast-charging investigations of large-format tabless cylindrical lithium-ion cells
P2-068


M.Sc. Hendrik Pegel
Co-Autoren:
Adrian Grimm, Christian Frey, Dirk Uwe Sauer
Institute for Power Electronics and Electrical Drives (ISEA)

4680 vs. 46XXX vs. fully customized: the influence of cell dimensions on the manufacturing cost of tabless cylindrical lithium-ion cells
P2-069


Mohamed Azzam
Co-Autoren:
Christian Endisch, Meinert Lewerenz
Technische Hochschule Ingolstadt

Modeling of the float current analysis
P2-070


Thomas Roth
Co-Autoren:
Philip Niehoff, Andreas Jossen
Technical University of Munich

Impact of Anode Overhang on Quality Assurance of Lithium-Ion Batteries
P2-071


Anne Heß
Co-Autoren:
Leonie Pfeifer, Philipp Seegert, Raphael Mühlpfort, Thomas Wetzel
Karlsruhe Institute of Technology (KIT)

Simulative and experimental investigation of the influence of separator and electrolyte on the behavior of lithium-ion cells
P2-072


Robin Drees
TU Braunschweig

Design and Assessment of Fast Charging Strategies for Lithium-Ion Batteries in Coin and Pouch Cell Format
P2-073


M. Sc. André Hebenbrock
Co-Autoren:
Thomas Turek
Technische Universität Clausthal

Fibre optic sensor options for the assessment of lithium-ion pouch cell degradation and safety
P2-074


M. Eng. Manuel Rubio Gómez
Co-Autoren:
Sebastian Ludwig, Andreas Jossen
Technische Universität München

Experimental Investigation on the Pulse Resistance of Lithium-Ion Cells at High Temperature
P2-075


PhD Simone Cailotto
Co-Autoren:
Evans, Kieran
PerkinElmer

The importance of Evolved Gas Analysis in the battery testing process
P2-076


M. Sc. Reinhard Scheuer
Co-Autoren:
Moritz Ehrensberger, Christian Endisch, Meinert Lewerenz
Technische Hochschule Ingolstadt

Determining Calendric Aging of different Li-Ion Cells using Float Current Analysis
P2-077


Julius Buchmann
Co-Autoren:
Christian Lechtenfeld, Martin Winter, Sascha Nowak
MEET Münster

Investigating the electrolyte-volume-dependent aging of lithium-ion batteries by means of instrumental analytical techniques
P2-078


B.A. Dominik Horváth
Co-Autoren:
Ruiyuan Tian, Joao Coelho, Cian Gabbett, Valeria Nicolosi, Jonathan Coleman
Trinity College Dublin

Quantifying the Dependence of Battery Rate Performance on Common Physical Parameters
P2-079


Dennis Kessen
Co-Autoren:
Christoph Peschel, Tautvydas Bieliauskas, Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
MEET - Münster Electrochemical Energy Technology

Comprehensive thermal analysis of surface films formed on lithium ion battery negative electrodes
P2-080


M. Sc. Alexander Grade
Co-Autoren:
Emmanuel Ezeoba, Dirk Uwe Sauer
Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University

Influence and Correlation of different Stress Factors on the Cyclic Aging of NMC622/Graphite Lithium-Ion-Batteries
P2-081


Dominik Droese
Co-Autoren:
Julian Long, Lars Krüger, Julia Kowal
TU Berlin

Internal Temperature Investigation of Prismatic Li-Ion Battery Using Inserted Temperature Sensors
P2-082


Daniel Luder
Co-Autoren:
Jipu Mao, Stephan Bihn, Dirk Uwe Sauer and Weihan Li
RWTH Aachen University | ISEA

Non-Invasive Parameter Identification of the Pseudo-2D Battery Model with Time- and Frequency-Domain Data
P3-001


Diplom Thomas Lehmann
Co-Autoren:
Frances Weiß
Fraunhofer Institute for Transportation and Infrastructure Systems IVI

Aging Diagnostics of Lithium-ion Batteries using Machine Learning and real Vehicle Fleet Data
P3-002


Murat Ceylan
GTU

A PRACTICAL ACTIVE BALANCING APPLICATION
P3-003


M. Sc. Felix Hildenbrand
Co-Autoren:
Heinrich Ditler, Dirk Uwe Sauer
ISEA RWTH Aachen

Quantifying the influence of temperature in cell-to-cell variation of cyclic ageing of lithium-ion batteries
P3-004


Prof. Dr. Wolfgang Bessler
Co-Autoren:
Jonas Braun, David Schmider, René Behmann
Offenburg University of Applied Sciences

A new approach for state of charge and state of health diagnosis of batteries using voltage-controlled models
P3-005


Dr.-Ing. Philipp Seegert
Co-Autoren:
S. Herberger, U. Siegel, Th. Wetzel
Karlsruhe Institute of Technology (KIT)

Replication of thermal cell behavior with substitute cells – A validation tool for thermal management systems
P3-006


Prof. Dr. Hans-Georg Schweiger
Co-Autoren:
Thomas Hußenether, Daniel Koch, Christina Schieber
TH Ingolstadt

Measurement uncertainties in the determination of battery parameters
P3-007


Tom Rüther
Co-Autoren:
Christian Plank, Maximilian Schamel, Gregor Ohnemüller, Bernd Rosemann, Frank Döpper, Michael A. Danzer
Universität Bayreuth

Detection of inhomogeneities in serially connected lithium-ion battery packs
P3-008


M.Sc. Sascha Berg
Co-Autoren:
Hendrik Laufen, Julian Engeser, Fabian Frie, Egbert Figgemeier
RWTH Aachen

Varying ageing mechanisms in lithium-ion pouch cells by charge-discharge cycling with different initial tension profiles
P3-009


Katharina Lilith Quade
Co-Autoren:
Moritz Baumann, Dirk Uwe Sauer, Weihan Li
Institute for Power Electronics and Electrical Drives - RWTH Aachen University

Using field data for State of Health Estimation
P3-010


M. Sc. Christian Rosenmüller
Co-Autoren:
Oliver Bohlen, Julia Kowal
Hochschule für angewandte Wissenschaften München

Modular testbed for inhomogeneous battery module behavior
P3-011


Haijun Ruan
Imperial College London

Deep learning diagnostic framework for rapid battery degradation quantification
P3-012


Valentin Steininger
BMW AG

A Feature Extraction Framework for Vehicle Diagnostic Data for Aging Estimation of 48V Li-Ion Batteries
P3-013


Gabriele Sordi
Co-Autoren:
C. Rabissi, A. Casalegno
Politecnico di Milano

Lithium-ion battery fast diagnosis and tracking of automotive aging modes with on-board data
P3-014


M.Sc. Sehriban Celik
Co-Autoren:
Zhan Ma, Alexander Blömeke, Muneeb Fida, Dirk Uwe Sauer
RWTH Aachen University

Electrochemical Impedance Spectroscopy of a Battery Module Considering Different Internal Cell Imbalances
P3-015


M. Sc. Jacob Klink
Co-Autoren:
Ralf Benger, Ines Hauer, Hans-Peter Beck
Technische Universität Clausthal

Methodology for the quantitative assessment and comparison of fault detection approaches at lithium-ion batteries with special consideration of internal short circuits
P3-016


M. Sc. Mauriz Kahmann
Technische Universität Braunschweig

Lithium-Plating diagnostic and their integration into a battery management system
P3-017


M.Sc. Joaquín Mascareñas Hinojosa
ISEA

Current distribution in parallel-connected battery cells considering inner resitance variation
P3-018


MSc Simon Feiler
Co-Autoren:
Daubinger P., Hartmann S., Gold L., Giffin G.A (Fraunhofer ISC)
Fraunhofer ISC

Correlation between ultrasonic time of flight and electrochemical parameters for the investigation of aging in LIB cells
P3-019


M.Sc. Jan Neunzling
Co-Autoren:
Kevin Böhm, Dr. -Ing. David Henriques, Dr. -Ing. Matthias Fleckenstein, Prof Dr. habil. Torsten Markus
BorgWarner AKASOL

Investigation of the influence of different aging stresses on the heat generation of an NMC Li-Ion battery
P3-020


M.Sc. Haider Adel Ali Ali
Co-Autoren:
Luc H.J. Raijmakers, Dmitri L. Danilov, Rüdiger -A. Eichel and Peter H.L. Notten
Forschungszentrum Jülich

A comparison between physics-based Li-ion battery models
P3-021


Miles Keat
Co-Autoren:
Volkan Kumtepeli, David Howey
University of oxford

Implementation of grid-scale hybrid battery systems
P3-022


Thomas Nyhues
MAHLE International GmbH / Karlsruhe Institute of Technology

Numerical and experimental investigation of immersion cooled battery cells and modules
P3-023


Max Rueter
Voltavision GmbH

Entwicklungsbegleitendes Prüfen von HV-Batterien mit modernster Prüfstandstechnik
P3-024


Fabian Oehler
Co-Autoren:
Andreas Graule (TUM), Andreas Jossen (TUM)
Infineon Technologies AG & Technische Universität München

Embedded anode potential-controlled fast charging of lithium-ion cells using an electrochemical model-based and experimentally validated virtual sensor
P3-025


PhD Volkan Kumtepeli
Co-Autoren:
David A. Howey
University of Oxford

Large-scale simulation of Li-ion battery systems for grid storage
P3-026


Jessica Hemmerling
Co-Autoren:
Kreher, Tina; Pross-Brakhage, Julia; Birke, Kai Peter
University of Stuttgart

Correlation of electrode expansion with internal gas pressure rise in cylindrical Li-ion cells using ideal gas law
P3-027


M.Sc. Franz Philipp Bereck
Co-Autoren:
Christian Hippolyt Bartsch, Limei Jin, Andreas Mertens, Rüdiger Eichel, Christoph Scheurer, Josef Granwehr
Forschungszentrum Jülich GmbH

Uncertainty weighted distribution of relaxation time analysis of battery impedance spectra using Gaussian process regression for noise estimation
P3-028


PhD Carlos Marques
Co-Autoren:
Vitorino Biazi Neto (first Author), Carlota Moreira, João Lemos Pinto, Micael Nascimento, Carlos Marques
I3N and Physics Department, University of Aveiro, Portugal

Virtual sensing to support Battery Management System: estimation algorithms for SOC and internal temperature of lithium-ion batteries
P3-029


PhD Sasan Ghashghaie
Co-Autoren:
Julien Bonefacino, Tianye Zheng, Chun-Pang Lin, Wenwei Zheng, Laura Albero Blanquer, Jiaqiang Huang, Charlotte Gervillié, Hwa-Yaw Tam, Jean-Marie Tarascon, and Steven T. Boles
Centre for Advances in Reliability and Safety (CAiRS)

Non-invasive application of polymer optical fiber sensors for high fidelity operando monitoring of strain and temperature in Li-ion batteries
P3-030


Masaki Adachi
Co-Autoren:
Yannick Kuhn, Birger Horstmann, Michael A. Osborne, David A. Howey
University of Oxford

Balancing accuracy and complexity when selecting battery models to fit data
P3-031


Master Emil Petkovski
Co-Autoren:
Loredana Cristaldi, Marco Faifer, Marek Lukasiewicz
Politecnico di Milano

Stepwise Regression Method for State of Health Estimation of Lithium-Ion Batteries Using Discharge Voltage Curves
P3-032


Johannes Liebertseder
Co-Autoren:
Andreas Dollinger, Thomas Sorg, Lars-Fredrik Berg, Martin Doppelbauer, Jens Tübke
Fraunhofer-Institut für Chemische Technologie ICT

Investigation of a Battery Tab Cooling System in Traction Battery Modules
P3-033


Olatz Lizaso
Co-Autoren:
Eduardo Miguel, Unai Iraola, Igor Cantero
Ikerlan S.COOP

Parameterisation of Electrical and Thermal Models at Module-Level for a Li-Ion Battery Digital Twin Simulation Platform
P3-034


M.Sc. Ni Meng
Co-Autoren:
khrystyna Yezerska, Dominique Koster, Daniela Fenske, Julian Schwenzel
Fraunhofer Institute for Manufacturing Technology and Advanced Material

Detailed degradation diagnosis of lithium-ion batteries by means of traditional analysis methods and data mining techniques
P3-035


Doctor of Engineering Akihiro Yamashita
Co-Autoren:
Sascha Berg, Egbert Figgemeier
Forschungszentrum Jülich

Disentangling factors from cyclic data of lithium ion batteries to improve accuracies of predicting models
P3-036


Research Engineer Antoine Laurin
Co-Autoren:
Tim MEULENBROEKS from TNO institution (NL): tim.meulenbroeks@tno.nl
CEA

Advanced Battery Management Systems methods for stationary storage application: preliminary results from the ISTORMY project
P3-037


Soumya Singh
Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA

Hybrid modelling of Lithium-ion batteries: Proof of concept for application of Physics-informed Neural Network in Electrochemical Battery Modelling
P3-038


PhD Tina Shoa
Cadex Electronics

EIS based battery management systems; Advantages, Challenges and Strategies for practical implementation for vehicle application
P3-039


Ph.D Student Mina Naguib
Co-Autoren:
Phillip Kollmeyer, Ali Emadi
McMaster University

Thermal Fault Detection of Lithium-Ion Battery Packs Through an Integrated Physics and Deep Neural Network Based Model
P3-040


PhD Vincent Heiries
Co-Autoren:
Arsene Gervex, Romain Franchi, Sebastien Martinet
Univ Grenoble Alpes, CEA, LETI, F-38000 Grenoble, France

Electrochemical Noise Analysis applied to new generation Li-ion batteries
P3-041


Master Degree Rémy Thomas
Co-Autoren:
Vincent Heiries, Romain Franchi, Marco Ranieri
CEA

An IR-based Wireless Optical Communication System for New Generation Battery Pack
P3-042


M. Sc. Dilane Jordan Dongmo Tadoum
Co-Autoren:
Alexander Blömecke, Dirk Uwe Sauer, Weihan Li
RWTH Aachen

Review of the standards for battery management systems and improvement potentials
P3-043


PhD Stephan Hildebrand
Co-Autoren:
A. Saturnio, A. Pilenga, F. Harskamp, R. Da Costa Barata, R. van der Aat, M. Lazareanu and N. Lebedeva
European Commission

Li-ion battery electrolyte leakage: detection of airborne components as early warning system
P3-044


Master's degree Hossein Nemati Bandkohan
Co-Autoren:
Patrick C. Howlett
Deakin University

Modelling and analysis of the Coulomb Counting SOC Estimation method for 18650 Li-ion batteries under varying charge-discharge protocols
P3-045


M.Sc. Benedikt Späth
Co-Autoren:
Kampker, Achim; Offermanns, Christian; Sasse, Konstantin; Frieges, Moritz H.; Späth, Benedikt
Chair of Production Engineering of E-Mobility Components - RWTH Aachen

Innovative multi-domain modeling approach for future battery architectures
P3-046


Ph.D. Josu Olmos
Co-Autoren:
Iñigo Gandiaga, Laura Oca, Alexis Rucci
Ikerlan Technology Research Centre

State-of-Safety algorithm for Li-ion Batteries based on internal novel sensing technologies
P3-047


M. Sc. Tobias Röhmel
RWTH ISEA

Early detection of Thermal Runaway in Li-Ion Roundcells using acoustic waves
P3-048


Alexander Reiter
Co-Autoren:
Stefan Brand, Christian Rosenmüller, Susanne Lehner, Oliver Bohlen, Dirk Uwe Sauer
MAN Energy Solutions SE

Model-based Predictive Maintenance for Li-Ion Battery Systems – Model Design and Experimental Data Generation
P3-049


Limei Jin
Forschungszentrum Jülich

Battery modeling: Fusing equivalent circuit models with data-driven models
P4-001


Dr. Sebastian Pohlmann
Skeleton Technologies

Ragone based sizing of energy storage - application examples for hybrid topologies and true high power batteries
P4-002


Prof. Dr. Martin Kiel
Co-Autoren:
Vanessa Steinkötter, Florian Lessmann, Prof. Dr. Stefan Kempen, Dr. Andrey Mashkin
Fachhochschule Dortmund

kV-Batt-Tech: Steps towards high DC-Voltages for Stationary Battery Systems
P4-003


Patrick Moessle
Co-Autoren:
Michael A. Danzer
University of Bayreuth

Generic Energy Flow Model for application in optimized combined operation of a Battery Energy Storage System and an Electrolyzer
P4-004


Lucas Koltermann
Co-Autoren:
Kevin Jacqué, Sebastian Zurmühlen, Jan Figgener, Dirk Uwe Sauer
RWTH Aachen University | Institut für Stromrichtertechnik und Elektrische Antriebe (ISEA)

Rule-based power distribution algorithm for a modular large-scale battery storage system
P4-005


M.D. Carlos Antônio Rufino Júnior
Co-Autoren:
Eleonora Riva Sanseverino, Hudson Zanin, Hans-Georg Schweiger
Technische Hochschule Ingolstadt (THI)

Battery tracking using blockchain-based platforms
P4-006


Akshay Misra
Co-Autoren:
Salvatore Cannavacciuolo, Vittorio D'Angelo
ST Microelectronics

Can fusing Li-ion cell impedance in BMS algorithms lead to further optimization of next generation EV battery system?
P4-007


B.Eng. René Behmann
Co-Autoren:
Jack Phan, Peter Majer, Michael Schmidt, Wolfgang G. Bessler
University of Applied Sciences Offenburg

Integration of a lithium-ion battery in a micro-photovoltaic system: Passive versus active hybridization
P4-008


PhD Francisco Diaz Gonzalez
Universitat Politecnica de Catalunya

Digitalisation and integration of a second life EV battery pack in an industry plant towards its ecological transition
P4-009


B. Sc. Jan-Ole Thranow
Co-Autoren:
A. Löchte, F. Winters, H. Hanßen, N. Hoeing, P. Glösekötter
FH Münster

Energy Storage using Zinc-Air Batteries
P4-010


Master of Engineering Jan Haß
Co-Autoren:
Christina Schieber, Nikolas Jaroch, Florian Meilinger, Prof. Hans-Georg Schweiger
Technische Hochschule Ingolstadt Forschungsinstitut CARISSMA

Investigation of the effect of safety function failure in lithium-ion battery systems at high overvoltages
P4-011


Yasemin Duygu Yücel
Co-Autoren:
Jocke Pettersson, Erik Adolfsson, Henrik Dykhoff, Stacy Trey, Maciej Wysocki, Dan Zenkert , Rakel Wreland Lindström, Göran Lindbergh
KTH Royal Institute of Technology

Electrochemical Performances of Powder-Impregnated Carbon Fiber-Based Positive Structural Electrodes
P4-012


Frank Deblon
Co-Autoren:
Jacob Klink, Ralf Benger
Clausthal University of Technology | Research Center Energy Storage Technologies

Enhanced RAGONE-Diagram for visual GAP-Analysis and Benchmark of stationary storage systems for the provision of dynamic grid power
P4-013


M.Sc Jingyu Gong
Co-Autoren:
Jan Figgener, David Wasylowski, Felix Hildenbrand, Weihan Li, Dirk Uwe Sauer
ISEA RWTH Aachen University

Optimizing the use of an EV battery with the dynamic switching between multiple applications
P4-014


Jonas van Ouwerkerk
Co-Autoren:
Jonas Brucksch, Christian Bußar, Dirk Uwe Sauer
Institute for Power Electronics and Electrical Drives (ISEA) RWTH Aachen University

Evaluating operating strategies of large-scale industrial battery storage - A case study of a glassworks site
P4-015


Nils Böttcher
Co-Autoren:
Anita Schmidt, Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung

Untersuchung des Verhaltens von ultratiefgekühlten und schockgekühlten Lithium-Ionen Zellen bei kritischer Beschädigung
P4-016


Ahmetcan Akar
FNSS DEFENCE SYSTEMS

Battery Sizing & EV Mode PMU Algorithm In Military Armored Hybrid Electrical Vehicles for Advanced Battery Power Conference
P4-017


Minh Nguyen
Institut für Stromrichtertechnik und Elektrische Anlagen, RWTH Aachen

System Sizing and Energy Management System for Hybrid Battery Storage Systems with Deep Reinforcement Learning
P4-018


M. Sc. Jue Chen
Institute for Power Electronics and Electrical Drives

Global sensitivity analysis of an electrochemical-thermal model for lithium-ion batteries considering multi-outputs
P4-019


M.Sc. M.Sc. Mauricio Eduardo Celi Cortés
Co-Autoren:
Lucas Koltermann, Najet Nsir, Sebastian Zurmühlen, Jan Figgener, Dirk Uwe Sauer
Institut für Stromrichtertechnik und Elektrische Antriebe

Optimal Multi-Use Operation of Utility-Scale Battery Systems: Techno-Economic Feasibility Study of the M5BAT Hybrid Storage in Aachen
P4-020


Prof. Dr.-Ing. André Böhm André Böhm
Hochschule Esslingen

D-SEe Forschungsprojekt: Neue Ladetechnologie ermöglicht Reichweite von 400 km nach 15 Minuten Ladezeit
P4-021


M. Sc. Jonas Brucksch
Co-Autoren:
Jingyu Gong, Jonas van Ouwerkerk, Jan Figgener, Dirk Uwe Sauer
Institute for Power Generation and Storage Systems (PGS) at RWTH Aachen University

Activating flexibility in an energy community through a two-level optimization algorithm
P4-022


M. Sc. Aaron Dlugosch
Co-Autoren:
Filip Vysoudil, Franzisca-Tamara Baumhof, Prof. Dr.-Ing. Thomas Vietor
Technische Universität Braunschweig

Recycling-oriented product design for battery modules and their integration in mobile applications - Identification of significant dismantling interfaces in battery systems and development of recycling-oriented design guidelines
P4-023


Elias Barbers
Co-Autoren:
Philipp Dechent, Dirk Uwe Sauer
Forschungszentrum Jülich

Simulating the influence of cell-to-cell parameter variations on battery aging and lifetime
P4-024


M. Eng. Christopher Wett
Co-Autoren:
Clara Ganuza, Elixabete Ayerbe, Bugra Turan, Simon Schwunk
Rheinische Fachhochschule Köln gGmbH

Extending the Single Particle Model using Method of Lines
P4-025


Zhan Ma
Co-Autoren:
Dilane Dongmo Tadoum, Dirk Uwe Sauer, Weihan Li
RWTH Aachen University

Influences and utilizations of ripple currents for batteries
P4-026


M. Sc. Marc Schiffler
Co-Autoren:
Adrian Schmidt, Adrian Lindner, Saeed Abdolhosseini, André Weber
Karlsruher Institut für Technologie

An Electrochemical-Thermal-Mechanical Model for Large Format Lithium Ion Batteries
P4-027


Dipl.-Ing. Dr. Gerald Sammer
AVL

Transform a battery lab into a high-performance test factory with 90%+ utilization
P4-028


Ph.D. Gunjan Kapadia
Indian Institute of Technology Madras (IIT Madras)

Battery performance, lifetime and in-situ safety testing device with simulated real-time operating conditions
P4-029


PhD Akhil Kongara
Co-Autoren:
Gunjan Kapadia, Aravind Kumar Chandiran
Indian Institute of Technology Madras

Mechanically refuellable zinc-air battery: A safe and sustainable alternative for large-scale, long-duration energy storage
P4-030


M.Sc. Stefanie Spörhase
Co-Autoren:
Amiriman Kianfar (PTB), Detlev Markus (PTB), Bernd Limbacher (R. STAHL Schaltgeräte GmbH), Stefan Essmann (PTB)
Physikalisch-Technische Bundesanstalt (PTB)

Thermal runaway of lithium-ion batteries in flameproof enclosures: effect of cell chemistry
P4-031


Master of Science Vincent Rohsmann
Tagueri AG

Bidirektionales Laden - Das BEV als mobile Powerbank
P4-032


Marco Kachler
Co-Autoren:
Jan Neunzling, Anita Bongards
BorgWarner

Battery right sizing for commercial vehicles
P4-033


M. Sc. Florian Schaeufl
Co-Autoren:
Benedikt Saffert, Prof. Dr.-Ing. Oliver Bohlen
Hochschule München

Multi-objective aging optimized operation of battery energy storage systems
P4-034


MSc Shemin Sagaria
Co-Autoren:
Mart van der Kam, Tobias Boström
UiT - The Arctic University of Norway

The influence of social parameters in V2G technology - An analysis on V2G acceptance, battery availability, charger power and the number of EVs.
P4-035


Prof. Ines Hauer
Co-Autoren:
Ines Hauer, Anton Chuprin, Sebastian Helm, Andreas Lindemann und Ralf Benger
Technische Universität Clausthal

Requirements for batteries for the optimal provision of instantaneous reserve
P4-036


M.Sc. Florian Rzepka
Technische Universtiät Berlin

Neuronale Netzarchitektur zur Alterungsbestimmung von stationären Speichern in dezentralen Energiesystemen
P4-037


Dr. Nadine Peez
Co-Autoren:
Bernd Diehl
Spectral Service AG

NMR Cocktail: A recipe for Lithium-ion battery analysis – with a focus on the recycling process
P4-038


Benedikt Tepe
Co-Autoren:
Sammy Jablonski, Holger Hesse, Andreas Jossen
Technical University of Munich

Load on mobile storage systems in various transportation means under the influence of the charging strategy
P4-039


Max Faßbender
Co-Autoren:
Faßbender, Max; Cao, Xinyuan; Andert, Jakob; (MMP, RWTH) Mützel, Samuel; Schade, Thomas; Xia, Feihong; Wegener, Marius; Savelsberg, Rene (BEM-S, FEV)
RWTH Aachen - Lehr- und Forschungsgebiet Mechatronik in mobilen Antrieben

Smart Bidirectional Charging of Electric Vehicles - an Analysis of Revenue Opportunities
P5-001


Dr. Uwe Guntow
Co-Autoren:
Rainer Jahn, Michael Hofmann, Martina Kapuschinski, Razieh Sarani, Tolga Yildiz
Fraunhofer Institute for Silicate Research ISC

Regeneration of NCM811 after separation from the decanter centrifuge
P5-002


Dr. rer. nat. Alice Hoffmann
Co-Autoren:
Tom Sperling, Stefan Wohnrau, Margret Wohlfahrt-Mehrens
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

Solvent-free roll-to-roll manufacturing process for LIB cathodes
P5-003


Prof. Dr.-Ing. Oliver Bohlen
Co-Autoren:
Markus Mühlbauer, Simon Schramm, Daniel Goldmann
Hochschule München

Flexibles Design und optimierte Steuerungsstrategie für heterogene 2nd-Life-Batteriesysteme – das Projekt UnABESA
P5-004


Claus Luber
Co-Autoren:
Steffen Straach
Fraunhofer FEP

Innovative Roll-to-Roll Production Process for Metal-On-Polymer Current Collectors
P5-005


Dr. Michael Hofmann
Co-Autoren:
Martina Kapuschinski, Andreas Gronbach, Markus Saal, Razieh Sarani, Uwe Guntow
Fraunhofer Institute for Silicate Research ISC

Towards direct recycling of lithium-ion batteries via sustainable and low-energy processes
P5-006


Dr. LL.M. Philipp Seidel
Co-Autoren:
Patrick Dutz, Felix Hoffmann, Bernd Schreiber, Alexander Krug, Rodrigo Navarro, Kai Oliver Zander, Shinichi Akayama
Arthur D. Little

Achieving Resilience and Sustainability for the EV Battery Supply Chain
P5-007


Tobias Krüger
Co-Autoren:
M. W. Kandula, M. Mund, H. Gruhn, Klaus Dilger
Institute of Joining and Welding TU Braunschweig

Inductive drying of lithium ion NMC622 cathodes
P5-008


Julia Gandert
Co-Autoren:
Marcus Müller, Thomas Wetzel
Karlsruhe Institute of Technology

Impact of the Compression Ratio due to Calendering on the Effective Thermal Conductivity of Lithium-Ion Cell Electrodes
P5-009


Pablo Morales Torricos
Co-Autoren:
Christian Endisch, Meinert Lewerenz
Technische Hochschule Ingolstadt

Influence of cell compression on the capacity recovery of cells during pauses in cyclic aging tests
P5-010


Ruihe Li
Co-Autoren:
Simon E. J. O'Kane, Monica Marinescu, Gregory J. Offer
Imperial College London

Modelling solvent transport in lithium-ion batteries
P5-011


Hakon Gruhn
Co-Autoren:
Tobias Krüger, Malte Mund, Maja W. Kandula and Klaus Dilger
TU Braunschweig, Institut für Füge- und Schweißtechnik

Tracking and Tracing in Battery Cell Production: Impact of DMC applied with Inkjet Printer and Laser on the Contacting Quality
P5-012


PhD Mozaffar Abdollahifar
Co-Autoren:
Felix Frobart, Arno Kwade
TU Braunschweig, iPAT

Heat Treatment Investigation on Recovery Graphite from Spent Lithium-ion Batteries
P5-013


PhD Daniel Torelli
Exponent - Failure Analysis Associates

Lithium-Ion Cell Safety and Failure Analysis
P5-014


Dr.-Ing. Haitham Saleh
Co-Autoren:
A. Oswald, T. Stuth, A. Poklad, A. Zeidler
hpulcas GmbH

Thin high purity nickel foil current collector
P5-015


Markus Eckstein
Co-Autoren:
Marcel Berling, Saskia Wessel
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Influence of climate change on energy consumption of dry rooms
P5-016


Paul Lingohr
Co-Autoren:
Marcel Drescher, Robert Ludwigs, Henning Clever, Dr. Heiner Heimes, Prof. Dr. Achim Kampker
PEM der RWTH Aachen University

Data based quality prediction in pilot scale battery production
P5-017


Henning Clever
RWTH Aachen University

Machine learning based prediction of electrode coating process parameters
P5-018


M.Sc. Adil Amin
Co-Autoren:
Adil Amin, Julius Timo Kahl, Moritz Loewenich, Stefan Bade, Julia Lyubina, Hartmut Wiggers, Fatih Özcan, Doris Segets
Institute for Combustion and Gas Dynamics – Particle Science and Technology (IVG-PST), University of Duisburg-Essen; Germany

Silicon-based supraparticles: Effect of median size of supraparticles on the electrochemical performance of their anodes in lithium-ion batteries
P5-019


Elard Niemöller
Pfeiffer Vacuum GmbH

Vacuum applications in battery production
P5-020


Jingyu Xie
Co-Autoren:
Dr. Jonathan Florez Montaño, Prof. Dr. Karl-Heinz Pettinger
Technology Centre Energy, Landshut University of Applied Sciences

The first studies of the impact of calendaring and lamination on full cell electrochemistry with Si@C-anodes
P5-021


Jakob Michael Hesper
Co-Autoren:
Martin Winter, Sascha Nowak
University of Münster

Recycling and Analysis of Lithium Ion Battery Electrolyte via Supercritical Fluid Extraction
P5-022


Jonas Neumann
Co-Autoren:
Dr. Sascha Nowak, Dr. Simon Wiemers-Meyer, Prof. Dr. Martin Winter
MEET Batterieforschungszentrum

Deactivation & Recycling of Lithium Metal Batteries through Supercritical Extraction
P5-023


M.Sc Francesco Colombo
Karlsruhe Institute of Technology

Electrochemical study of LiTFA, LiTFSI and LiODFB as slurry cathode additives for tunable rheology in 75.5 mass% solid content NMC622 slurries
P5-024


Dr Anton Werwein
Co-Autoren:
Jann Seeba, Kristian Nikolowski, Mareike Partsch, Alexander Michaelis
Fraunhofer IKTS

Process development for continuous extrusion coating of battery electrodes and scale up to pilot scale
P5-025


Franzisca-Tamara Baumhof
Co-Autoren:
Malte Mund, Maja Kandula, Prof. Dr.-Ing. Klaus Dilger
TU Braunschweig

Investigation of laser cutting as a cell disassembly process for battery recycling
P5-026


Dipl. Ing. Fernanda Noronha
Institute for Particle Technology, TU Braunschweig

Wet vs dry mechanical recycling process – an outlook for anodic active material recycling
P5-027


M. Sc. Rui Yan Li
Co-Autoren:
Jessica Schmied, Henning Clever, Heiner Heimes, Achim Kampker
Production Engineering of E-Mobility Components (PEM) | RWTH Aachen University

Intelligente Anlaufsteuerung zur kostenreduzierten und flexiblen Fertigung zukünftiger Batteriezellen – InTeAn
P5-028


Dr. rer. nat. Alexander Britting
Co-Autoren:
Christopher Burnett
Thermo Fisher Scientific

Optimization of in-line metrology for electrode coating production lines
P5-029


Johannes Schöll
Co-Autoren:
Jannik Pfeuffer, Christian Baur, Markus Hackmann
P3 Automotive GmbH

The Battery Product Carbon Footprint – Key Emission Drivers for state-of-the-art HV Batteries
P5-030


M. Sc. Mechanical Engineering Sima Hellmers
Co-Autoren:
H. Wang, A-C. Böttcher, A. Kwade
TU Braunschweig/ Institute for Particle Technology

Influence of breakage type on Lithium enrichment under impact and compressive stress of LiBs’ slag using SEM-MLA
P5-031


Alberto Masi
NETZSCH-Feinmahltechnik GmbH

Scalable ASSB production processes for efficient wet dispersion of slurries in research, pilot and future production plants
P5-032


M. Sc. Dennis Beusen
Co-Autoren:
Dr.-Ing. Harald Zetzener; Prof. Dr.-Ing. Arno Kwade
Tchnische Universität Braunschweig - Institut für Partikeltechnik

Data-assisted vacuum crushing and drying of end-of-life batteries
P5-033


Anna Rollin
Co-Autoren:
Michael Kurrat
TU Braunschweig | elenia - Institute for High Voltage Technology and Energy Systems

How are Different Metal Oxalates Influencing Li-Ion-Batteries?
P5-034


Dr. Lisa Beran
Co-Autoren:
Vincent Nebel, Andriy Taranovskyy, Macel Mutz, Tobias Käfer, Dirk Werth, Tobias Kraus
Leibniz-Institut für Neue Materialien

Digitalizing Battery Production – Harmonizing Battery Production and Battery Materials Data
P5-035


Simon Otte
Co-Autoren:
Dominik Mayer, Prof. Dr.-Ing. Jürgen Fleischer
Karlsruher Institute of Technology

Data logging tool for automatic data acquisition during continuous slurry mixing in electrode manufacturing
P5-036


M. Sc. Delil Demir
Co-Autoren:
Samuel Moritz Fink M. Sc.
Fraunhofer Institute for Laser Technology ILT

Towards fast laser drying – Investigation of challenges and opportunities of fast laser drying in industrial scale battery production
P5-037


Simon Ziegler
Co-Autoren:
Martin Hausruckinger, Benedikt Schug, Andreas Flegler, Guinevere A. Giffin
Fraunhofer Institute for Silicate Research ISC

Contactless cell opening of lithium-ion pouch cells and reuse of pouch foil within the direct recycling approach
P5-038


M.Sc. Daniel Neb
Co-Autoren:
Sebastian Wolf
Chair of Production Engineering of E-Mobility Components (PEM) at RWTH Aachen University

Overview on current advances on laser drying of electrodes for lihtium-ion battery cells
P5-039


Dr. Salvatore Pillitteri
Co-Autoren:
Marcella Horst, Gerrit Schälicke, Aurelien Neveu, Filip Francqui
Granutools

How mixing influences powder properties for battery manufacturing
P5-040


Dr. Matthias Simolka
TWAICE Technologies GmbH

Risikominimierung & Leistungsoptimierung von Batterien während der Entwicklung und des Betriebs mit hybriden Simulationsmodellen
P5-041


Markus Hagen
Co-Autoren:
Eran Nave, Josef Quan Nguyen, David Hui Shyan Lau, Philipp Heugel, Jens Tübke
Batalyse GmbH

Automated data management in R&D cell production
P5-042


Johanna Haupt
Co-Autoren:
Maximilian Rolinck, Felipe Cerdas, Christoph Herrmann
Institut für Werkzeugmaschinen und Fertigungstechnik, TU Braunschweig

Development of a data transparency platform for sustainable battery material value chains
P5-043


Emanuel-Sebastian Drude
Co-Autoren:
Bernd Friedrich
IME - Process Metallurgy and Metal Recycling, Institute and Chair at RWTH Aachen University

Recycling Strategies for Sulfide-Based All-Solid-State Lithium-Ion Batteries
P5-044


Wei Song
Co-Autoren:
Fabian Diaz, Bernd Friedrich
RWTH Aachen, IME

A Hierarchical Database Schema with High-Level Indicators for Recycling Processes of Lithium-ion Batteries
P5-045


Dr. Christian Modrzynski
DECHEMA-Forschungsinstitut

An Electrochemical Process for Recovering Metals from Lithium-Ion Battery Waste
P5-046


M.Sc Abdur-Rahman Ali
Co-Autoren:
Jana Hussmann, Jan-Linus Popien, Franziska Punt, Dominic Dittmer, Mahya Nezhadfard, Dr. Felipe Cerdas, Prof. Arno Kwade, Prof. Christoph Herrmann
TU Braunschweig

Model-based life cycle engineering for circular supply chains of lithium-ion batteries
P5-047


Dott. Mag. Emanuele Michelini di San Martino
Co-Autoren:
Patrick Höschele, Christian Ellersdorfer, Jörg Moser
TU Graz - Vehicle Safety Institute

Failure Modes and Effects Analysis used for the identification of critical loads applied to second-life mobile and stationary applications
P5-048


Felix Nagler
Co-Autoren:
Christian N., Flegler A., Hofmann M. Giffin G. A.
Fraunhofer ISC

Influence of process conditions on direct and aqueous recycling of high nickel rich cathodes
P5-049


Sebastian Wolf
Production Engineering of E-Mobility Components (PEM) RWTH Aachen University

Lasertrocknung in der Elektrodenfertigung von Lithium-Ionen-Batterien - Der Weg zur nachhaltigen Batterieproduktion
P5-050


Dr Kristina Borzutzki
Co-Autoren:
Markus Börner, Olga Fromm, Uta Rodehorst, Saskia Wessel, Martin Winter, Jens Tübke
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Process-product relations in continuous processing of electrode pastes for lithium ion batteries
P5-051


Sandro Süß
Co-Autoren:
Dennis Beusen, Wei Song, Sebastian Hippmann, Benjamin Effner, Alexander Nickol, Mark Mennenga, Bernd Friedrich, Arno Kwade, Christoph Herrmann
Technische Universität Braunschweig

Data to Value in the Recycling of Lithium-Ion Batteries

Vorträge

Vortrag
27.04.2023
Session 1A

13:30 Uhr
Rubén Parra
Co-Autoren:
D. del Olmo, V. Roman, G. Baraldi, E. Ayerbe
Cidetec Energy Storage

Towards representative ageing parameterization: separating individual contributions of degradation mechanisms in Ni-rich lithium ion prototype cells
27.04.2023
Session 1A

14:10 Uhr
Alexander Smith
Co-Autoren:
Pontus Svens, Göran Lindbergh, Rakel Wreland Lindström
KTH Royal Institute of Technology

Reconstructing lithium-ion cell performance and degradation from harvested electrodes and separators
27.04.2023
Session 1A

13:50 Uhr
Fabian Frie
ISEA - RWTH Aachen

Correlating electric data Analysis with Post-Mortem results of calendric aged 18650 Lithium-Ion Cells with Si/C Anode
27.04.2023
Session 1A

14:30 Uhr
Dr. Meinert Lewerenz
Co-Autoren:
Fan Xue, Christian Endisch
University of Applied Science Ingolstadt

Finding the Calendar Aging Mechanisms causing Float Currents
27.04.2023
Session 1B

13:30 Uhr
PhD Marilena Mancini
Co-Autoren:
J. Martin, M. Hoffmann, P. Axmann, M. Wohlfahrt-Mehrens
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg ZSW

Direct recycling of anode and cathode active materials: from EoL cells to performance in new LiBs
27.04.2023
Session 1B

14:10 Uhr
Jannik Pfeuffer
Co-Autoren:
Baur Christian, Schöll Johannes, Stanek Robert
P3 automotive GmbH

Evaluation of the Product Carbon Footprint of Lithium-Ion Batteries – Easier said than done? Challenges and methologies for a conclusive Battery PCF
27.04.2023
Session 1B

14:30 Uhr
Markus Volkening
Co-Autoren:
Kilian Sagner
FEV Consulting

Will Li-Ion battery recycling ever become cost effective?
27.04.2023
Session 1B

13:50 Uhr
M. Sc. Ricardo Sanchez
Co-Autoren:
Dominique Koster, Daniela Fenske, Soenke Stuehrmann, Karin Jahn, and Julian Schwenzel
Fraunhofer IFAM

Digital Cell Designer for the Environmental Impact Analysis of Metal-ion Battery Cells
27.04.2023
Session 1C

13:30 Uhr
M. Eng. Daniel Becher
Co-Autoren:
Marius Bauer
Zentrum für Sonnenenergie- und Wasserstoff- Forschung Baden-Württemberg

Enthalpy supported barriers for preventing thermal propagation – From research to market
27.04.2023
Session 1C

13:50 Uhr
Andreas Aufschläger
Co-Autoren:
Simon Kücher, Ludwig Kraft, Axel Durdel, and Andreas Jossen
Technische Universität München (TUM)

Optimizing the Cell Compression for the Electrochemical Performance and the Reversible Swelling of 5 Ah NMC622/Graphite Lithium-Ion Pouch Cells
27.04.2023
Session 1C

14:30 Uhr
Hendrik Löbberding
Co-Autoren:
Dr. Michael Stapelbroek, Dr. Moritz Teuber, Dr. Andreas Averberg, Rüdiger Beykirch, Dr. Murat Demirci , Tobias Klerks (alle FEV), Florian Pampel (Chair of Thermodynamics of Mobile Energy Conversion Systems der RWTH Aachen University)
FEV Europe GmbH

Solid-State battery pack design: Impact of next generation solid-state cells?
27.04.2023
Session 1C

14:10 Uhr
M. Sc. Alexander Epp
Volkswagen AG

Optimized lithium-ion cell design for different stages of battery cell to pack integration
27.04.2023
Session 2A

16:10 Uhr
Dr. Jonas Krug von Nidda
Co-Autoren:
Nils Böttcher, Anita Schmidt
Bundesanstalt für Materialforschung und -prüfung (BAM)

Investigating thermal runaway effects and propagation behaviour of various types of commercial lithium-ion cells
27.04.2023
Session 2A

16:30 Uhr
M. Sc. Marius Flügel
Co-Autoren:
Mario Marinaro, Margret Wohlfahrt-Mehrens, Markus Hölzle, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Characterization and general trends of Li deposition in full cells with Si/graphite anodes
27.04.2023
Session 2A

15:50 Uhr
Iñigo Gandiaga
Co-Autoren:
J. Olmos, F. Bonaccorso, H. Kren, J. de Hoog, B. Eschelmüller
Ikerlan

Cell-integrated Sensing functionalities for smart battery systems with improved performance and safety
27.04.2023
Session 2A

16:50 Uhr
M.Sc. Jan Petit
Co-Autoren:
Philipp Heugel, Martin Joos, Franziska Klein, Jens Tübke
Fraunhofer Institute for Chemical Technology ICT

Combined operando mass spectrometry and operando dilatometry to analyse ageing processes
27.04.2023
Session 2B

16:10 Uhr
Dr. Alexander Möller
Umicore

EV material designs beyond NMC – Cost optimized chemistries for the next generation
27.04.2023
Session 2B

16:50 Uhr
PhD Jérémie Fondard
Co-Autoren:
D.Peralta
CEA Grenoble

Effect on titanium doping on LNMO’s performance
27.04.2023
Session 2B

15:50 Uhr
Jannes Müller
Co-Autoren:
Peter Michalowski, Arno Kwade
Technische Universität Braunschweig

Influence of silicon particle size and content on the performance of carbon coated nano-silicon graphite composites (Si@Gr/C)
27.04.2023
Session 2B

16:30 Uhr
Marlena Maria Bela
Co-Autoren:
Lukas Herbers, Marian Stan, Johannes Kasnatscheew, Martin Winter, Markus Börner
MEET Batterieforschungszentrum

Improving the Li-Ion Flux of Lithium Electrodes by an artificial Dual Protective Coating
27.04.2023
Session 2C

16:30 Uhr
PhD Christianna Lininger
Co-Autoren:
Tony Thai
Voltaiq

Advanced Analytics for Battery Production Ramp and Yield Optimization
27.04.2023
Session 2C

16:50 Uhr
Dr. Tobias Neubrand
Baker Hughes Digital Solutions GmbH

EV-Batterien in der Produktivitätsfalle – wie industrielle Computertomografie hohe Ausschussraten auf Zellebene senken kann
27.04.2023
Session 2C

15:50 Uhr
Mark Junker
Co-Autoren:
Jannis Schumann, Felix Hildenbrand, Dirk Uwe Sauer
ISEA / RWTH Aachen University

Implications of Cell-to-Cell Variations on 2nd Use Batteries – An Experimental Study on Performance Distribution and Future Ageing Behaviour
27.04.2023
Session 2C

16:10 Uhr
Alexander Diener
Co-Autoren:
Julian Kristoffer Mayer, Yue Zhang, Arno Kwade
TU Braunschweig

Impact of carbon black agglomerate size on the calendaring process and cell performance for NMC622 based cathodes
28.04.2023
Session 3A

14:00 Uhr
PhD Mayur Bonkile
Co-Autoren:
Yang Jiang, Niall Kirkaldy, Valentin Sulzer, Robert Timms, Huizhi Wang, Gregory Offer, Billy Wu
Imperial College London

Stress Modelling in Composite Silicon/Graphite Lithium-ion Battery Anodes
28.04.2023
Session 3A

13:00 Uhr
MEng Adam Lewis-Douglas
Co-Autoren:
Toby Kirk, David Howey, Colin P. Please, S. Jon Chapman
University of Oxford

Practical challenges associated with nonlinear impedance measurements for battery characterization
28.04.2023
Session 3A

13:20 Uhr
Prof. Dr.-Ing. Julia Kowal
Co-Autoren:
Pablo Korth Pereira Ferraz, Erik Goldammer
TU Berlin

Impact of power electronics on battery lifetime
28.04.2023
Session 3A

13:40 Uhr
Dr.-Ing. Michael Schönleber
Co-Autoren:
Dr.-Ing. Jan Richter
Batemo GmbH

Cell Design on Target – Maximum Performance at Optimal Cost in Minimal Time
28.04.2023
Session 3B

13:20 Uhr
PhD Christian Prehal
Co-Autoren:
Jean-Marc von Mentlen, Sara Drvarič Talian, Alen Vizintin, Robert Dominko, Heinz Amenitsch, Lionel Porcar, Stefan A. Freunberger, Vanessa Wood
ETH Zürich

On the nanoscale structural evolution of solid discharge products in Li-S batteries using X-ray, neutron and electron techniques
28.04.2023
Session 3B

14:00 Uhr
PhD Denis Pasero
Co-Autoren:
John Tinson
Ilika Technologies

Building the Solid State Factory
28.04.2023
Session 3B

13:00 Uhr
Janika Wagner
Co-Autoren:
Dacheng Kuai, Perla B. Balbuena, Ulrike Krewer
Karlsruher Institut für Technologie

How does vinylene carbonate affect the formation of initial surface passivation layers on lithium metal? – A model-based analysis
28.04.2023
Session 3B

13:40 Uhr
Stephanie Poetke
Technische Universität Dresden

High-energy solid-state batteries by the use of Si-C and µm-Si materials
28.04.2023
Session 3C

13:20 Uhr
Dr.-Ing. Weihan Li
Co-Autoren:
Jue Chen, Katharina Quade, Daniel Luder, Jingyu Gong, Dirk Uwe Sauer
RWTH Aachen, ISEA

Online ageing mode diagnosis for lithium-ion batteries with field data and artificial intelligence
28.04.2023
Session 3C

13:40 Uhr
M. Sc. Stefanie Freese
Co-Autoren:
Dominique Koster, Khrystyna Yezerska, Daniela Fenske, Julian Schwenzel
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung – IFAM

Identification of Relevant Aging Parameters and Data-Driven State of Health Estimation of Lithium-Ion Batteries
28.04.2023
Session 3C

14:00 Uhr
PhD Çağla Odabaşı Özer
Co-Autoren:
Onur Taşkıran, Burak Evyapan
Siro Silk Road Clean Energy Storage Technologies

Data-Driven and Real-Time Early Detection of Thermal Propagation under Different Driving Conditions
28.04.2023
Session 3C

13:00 Uhr
Dr. Preben J. S. Vie
Co-Autoren:
Torleif Lian, Martin Gilljam, Julia Wind, Lena Spitthof, John Ostrander, Sissel Forseth
IFE - Institute for Energy Technology

Safety and diagnostics of aged large commercial Li-ion pouch cells
28.04.2023
Session 4A

15:20 Uhr
Nils Collath
Co-Autoren:
Benedikt Tepe, Stefan Englberger, Holger Hesse, Andreas Jossen
Technical University of Munich

Aging aware operation of lithium-ion battery energy storage systems
28.04.2023
Session 4A

16:20 Uhr
Steffen Link
Co-Autoren:
Tim Hettesheimer
Fraunhofer-Institut für System- und Innovationsforschung ISI

Find the most suitable battery cell for different applications: A pre-filter cell selection method based on cost-parity analysis and publically available data
28.04.2023
Session 4A

16:00 Uhr
PhD student Mathilda Ohrelius
Co-Autoren:
Magnus Berg, Rakel Wreland Lindström, Göran Lindbergh
KTH Royal Institute of Technology / Applied Electrochemistry

Flexibility and lifetime of battery energy storage systems
28.04.2023
Session 4A

15:40 Uhr
Dr. Claudio Rabissi
Co-Autoren:
Gabriele SORDI, Andrea CASALEGNO
Politecnico di Milano

Understanding the degradation of post-use lithium-ion batteries aged under real automotive usage
28.04.2023
Session 4B

15:20 Uhr
PhD Nae-Lih Nick Wu
National Taiwan University

Functional Polymer Coatings Boosting Performance and Safety of Li-Ion Batteries
28.04.2023
Session 4B

16:00 Uhr
Dr. Franziska Jach
Co-Autoren:
Maximilian Wassner, Ralf Benger, Ulrike Wunderwald
Fraunhofer IISB Erlangen

Upscaling aluminium-graphite batteries: from lab to an application relevant cell design
28.04.2023
Session 4B

15:40 Uhr
Hyunsang Joo
Co-Autoren:
Gebrekidan Gebresilassie Eshetu and Egbert Figgemeier
Helmholtz Institute Muenster

Additive-mediated Prelithiation and Its Application Strategies to Industry: Toward the Era of Si-based Anode in Li-ion Batteries
28.04.2023
Session 4B

16:20 Uhr
Dominik Stepien
Co-Autoren:
Alessandro Innocenti, Ziyuan Lyu, Stefano Passerini and Dominic Bresser
Helmholtz-Institut Ulm (HIU)

Tracking the Li+ concentration on the surface of lithium metal electrodes upon cycling
28.04.2023
Session 4C

15:20 Uhr
Prof. Dr.-Ing. Michael A. Danzer
Co-Autoren:
Felix Katzer, Leonard Jahn
Universität Bayreuth

Reliable operando detection of lithium deposition via voltage, impedance, and dilation measurements
28.04.2023
Session 4C

15:40 Uhr
Chemistry Edurne Jaime-Barquero
Co-Autoren:
Bruno Correa1, Álvaro Herrán1, Jean-Luc Dauvergne1, Ekaitz Zulueta2, Emilie Bekaert1
CIC energiGUNE

Infrared thermography for the generation, tracking and detection of defects in lithium-ion batteries
28.04.2023
Session 4C

16:20 Uhr
PhD Vincent Heiries
Co-Autoren:
Marco Ranieri, Romain Franchi, Rémy Thomas
Univ Grenoble Alpes, CEA, LETI, F-38000 Grenoble, France

Toward a multi-physics sensing smart battery cell concept : application of mechanical strain gauge sensors to improved cell state diagnosis
28.04.2023
Session 4C

16:00 Uhr
Dr. Björn Kleinsteinberg
Co-Autoren:
Daniel Evans
HELLA GmbH & Co. KGaA

Comparison of Balancing Strategies with Cells of a wide Quality Range