Weitere Angebote zum Thema Batterietechnik

Advanced Battery Power:
Tagungssprache ist englisch

Advanced Battery Power Programm

Die Tagungssprache ist Englisch.

Internationale Konferenz am 10. – 11. April 2024

Das Programm

PEC is the Global Leader in Turn-Key Solutions for Automated Cell Manufacturing and Testing
www.peccorp.com

Tag 1 // 10. April 2024

Sessionleiter: Prof. Dr. Martin Winter, Prof. Dr. Dirk Uwe Sauer

09:00 – 10:00

Anmeldung

10:00 – 10:10

Begrüßung

Prof. Dr. Martin Winter
Universität Münster

Ort: Congress Saal

10:10 – 10:15

Grußwort

Prof. Dr. Werner Klaffke
Haus der Technik

Ort: Congress Saal

10:15 – 10:20

Grußwort

Dr. Jan Henning Behrens
Bundesministerium für Bildung und Forschung (bmbf)

Ort: Congress Saal

Plenarvorträge // Keynote Speaker

Sessionleiter: Prof. Dr. Dirk Uwe Sauer, Prof. Dr. Martin Winter

Ort: Congress Saal

10:20 – 10:55

2 Years of PowerCo SE – Ramping-Up a Global Battery Champion

Frank Blome
PowerCo SE

10:55 – 11:30

What will the vehicle battery of the future look like?

Prof. Dr. Markus Lienkamp
Technische Universität München

Postersession und Ausstellung

11:30 – 12:30

Postersession 1 (gerade Posternummern) und Ausstellung
Posterbewertung

11:45 – 13:15

Mittagspause und Ausstellung

Parallelsession 1

13:15 – 14:35

Session 1A: Pack Level 1 - Diagnostics
Sessionleiter:
Dr. Volker Hennige, AVL List GmbH
Prof. Dr.-Ing. Andreas Jossen, TU Munich
Dr. Peter Pilgram, Audi AG

Ort: Congress Saal

13:15Balancing Resistor-based Online Electrochemical Impedance SpectroscopyAlexander Blömeke
Co-Autoren:
Hendrik Zappen, Florian Ringbeck, Florian Krause, Dirk Uwe Sauer
RWTH Aachen University
13:35Addressing Challenges in Electrochemical Impedance Spectroscopy for Battery Management Systems: A Methodology for Valid EIS Results with Short Rest Times by Compensating Test ConditionsDr. Tina ShoaCadex Electronics Inc.
13:55Electrochemical Analysis of Lithium-Ion Batteries using Reference ElectrodesDaniel Rutz
Co-Autoren:
Felix Brauchle
Mercedes-Benz AG
14:15Lithium-ion battery degradation: the missing piece in validationPh.D. Simon O'Kane
Co-Autoren:
Ruihe Li, Niall D. Kirkaldy, Fabian Oehler, Monica Marinescu, Gregory J. Offer, Simon E. J. O'Kane
Imperial College London
13:1510.04.2024
Session 1A


13:15 Uhr
Alexander Blömeke
Co-Autoren:
Hendrik Zappen, Florian Ringbeck, Florian Krause, Dirk Uwe Sauer
RWTH Aachen University

Balancing Resistor-based Online Electrochemical Impedance Spectroscopy
13:3510.04.2024
Session 1A


13:35 Uhr
Dr. Tina Shoa
Cadex Electronics Inc.

Addressing Challenges in Electrochemical Impedance Spectroscopy for Battery Management Systems: A Methodology for Valid EIS Results with Short Rest Times by Compensating Test Conditions
13:5510.04.2024
Session 1A


13:55 Uhr
Daniel Rutz
Co-Autoren:
Felix Brauchle
Mercedes-Benz AG

Electrochemical Analysis of Lithium-Ion Batteries using Reference Electrodes
14:1510.04.2024
Session 1A


14:15 Uhr
Ph.D. Simon O'Kane
Co-Autoren:
Ruihe Li, Niall D. Kirkaldy, Fabian Oehler, Monica Marinescu, Gregory J. Offer, Simon E. J. O'Kane
Imperial College London

Lithium-ion battery degradation: the missing piece in validation

13:15 – 14:35

Session 1B: Cell Level 1 - Aging
Sessionleiter:
Dr. Eberhard Meißner, Battery expert
Dr. Alexander Warnecke, HELLA GmbH & Co. KGaA.

Ort: Roter Saal, 1. OG

13:15Processes During Thermal Degradation of Lithium-ion Batteries at Elevated TemperaturesMichail Gerasimov
Co-Autoren:
Ulrike Krewer
Karlsruhe Institute for Technology
13:35From data to electrochemical system characterisation - a novel method of impedance analysisProf. Dr.-Ing. Michael A. Danzer
Co-Autoren:
Tom Rüther, Christian Plank
Universität Bayreuth
13:55Prediction of cell life and failure analysis in virtual environmentLuke Hu
Co-Autoren:
Prof. Zhe Li, Tsinghua University, China
Electroder
14:15Calendar aging of Si/graphite anodes in Li-ion full cellsKatharina Bischof
Co-Autoren:
Marius Flügel, Markus Hölzle, Margret Wohlfahrt-Mehrens, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg
13:1510.04.2024
Session 1B


13:15 Uhr
Michail Gerasimov
Co-Autoren:
Ulrike Krewer
Karlsruhe Institute for Technology

Processes During Thermal Degradation of Lithium-ion Batteries at Elevated Temperatures
13:3510.04.2024
Session 1B


13:35 Uhr
Prof. Dr.-Ing. Michael A. Danzer
Co-Autoren:
Tom Rüther, Christian Plank
Universität Bayreuth

From data to electrochemical system characterisation - a novel method of impedance analysis
13:5510.04.2024
Session 1B


13:55 Uhr
Luke Hu
Co-Autoren:
Prof. Zhe Li, Tsinghua University, China
Electroder

Prediction of cell life and failure analysis in virtual environment
14:1510.04.2024
Session 1B


14:15 Uhr
Katharina Bischof
Co-Autoren:
Marius Flügel, Markus Hölzle, Margret Wohlfahrt-Mehrens, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

Calendar aging of Si/graphite anodes in Li-ion full cells

13:15 – 14:35

Session 1C: Application
Sessionleiter:
Dr. Jörg Huslage, PowerCo SE
Dr.-Ing. Michael Stapelbroek, FEV Europe GmbH

Ort: Blauer Saal

13:15Premium Platform Electric (PPE): development of superior charging performanceDr. Bernhard Rieger
Co-Autoren:
Patrick Morgenroth, Dr. Peter Pilgram, Dr. Sebastian Lacher, Andreas Nöst
Audi AG
13:35Battery-in-the cloud for modelbased adaptive control strategiesDr. Gerald Rämisch
Co-Autoren:
P. Bögemann, L.Petersen
Volkswagen AG
13:55Safety Requirements of Stationary Energy Storage Systems for the North American MarketJürgen Böck
Co-Autoren:
Maurice Johnson
UL Solutions
14:15Application Driven Differences in Design and Operation of Large-Scale BatteriesProf. Dr. Susanne Lehner
Co-Autoren:
Alexander Reiter
FAU Erlangen-Nürnberg
13:1510.04.2024
Session 1C


13:15 Uhr
Dr. Bernhard Rieger
Co-Autoren:
Patrick Morgenroth, Dr. Peter Pilgram, Dr. Sebastian Lacher, Andreas Nöst
Audi AG

Premium Platform Electric (PPE): development of superior charging performance
13:3510.04.2024
Session 1C


13:35 Uhr
Dr. Gerald Rämisch
Co-Autoren:
P. Bögemann, L.Petersen
Volkswagen AG

Battery-in-the cloud for modelbased adaptive control strategies
13:5510.04.2024
Session 1C


13:55 Uhr
Jürgen Böck
Co-Autoren:
Maurice Johnson
UL Solutions

Safety Requirements of Stationary Energy Storage Systems for the North American Market
14:1510.04.2024
Session 1C


14:15 Uhr
Prof. Dr. Susanne Lehner
Co-Autoren:
Alexander Reiter
FAU Erlangen-Nürnberg

Application Driven Differences in Design and Operation of Large-Scale Batteries

Postersession und Ausstellung

14:35 – 15:35

Postersession 2 (ungerade Posternummern) und Ausstellung
Posterbewertung

Parallelsession 2

15:35 – 16:55

Session 2A: Life Cycle 1 – Production + Life Cycle Assessment
Sessionleiter:
Prof. Dr. Simon Lux, Fraunhofer Research Institution for Battery Cell Production Cell FFB
Prof. Dr. Arno Kwade, TU Braunschweig

Ort: Congress Saal

15:35Costs, carbon footprint, and environmental impacts of lithium-ion batteries – from cathode active material synthesis to cell manufacturing and recyclingMoritz GutschUniversity of Muenster
15:55Advanced and beyond lithium-ion cell production at Fraunhofer FFBDr. Richard Schmuch
Co-Autoren:
Philipp Voß, Moritz Schaefer, Julian Zahnow, Jonas Henschel, Simon Lux
Fraunhofer Research Institution for Battery Cell Production FFB
16:15Designing more sustainable battery supply chains in terms of their environmental, economic, and social impactsJan-Linus Popien
Co-Autoren:
Alexaner Barke, Thomas S. Spengler
Technische Universität Braunschweig
16:35Implementing a Circular Economy for BatteriesDr. Johannes Betz
Co-Autoren:
Matthias Buchert, Nino Schön-Blume, Daniela Eckert, Katharina Göckeler, Wolf Görz, Ulrike Heutmanek, Cornelia Merz, Inia Steinbach
Öko-Institut
15:3510.04.2024
Session 2A


15:35 Uhr
Moritz Gutsch
University of Muenster

Costs, carbon footprint, and environmental impacts of lithium-ion batteries – from cathode active material synthesis to cell manufacturing and recycling
15:5510.04.2024
Session 2A


15:55 Uhr
Dr. Richard Schmuch
Co-Autoren:
Philipp Voß, Moritz Schaefer, Julian Zahnow, Jonas Henschel, Simon Lux
Fraunhofer Research Institution for Battery Cell Production FFB

Advanced and beyond lithium-ion cell production at Fraunhofer FFB
16:1510.04.2024
Session 2A


16:15 Uhr
Jan-Linus Popien
Co-Autoren:
Alexaner Barke, Thomas S. Spengler
Technische Universität Braunschweig

Designing more sustainable battery supply chains in terms of their environmental, economic, and social impacts
16:3510.04.2024
Session 2A


16:35 Uhr
Dr. Johannes Betz
Co-Autoren:
Matthias Buchert, Nino Schön-Blume, Daniela Eckert, Katharina Göckeler, Wolf Görz, Ulrike Heutmanek, Cornelia Merz, Inia Steinbach
Öko-Institut

Implementing a Circular Economy for Batteries

15:35 – 16:55

Session 2B: Cell Level 2 - Safety/Lithium Plating
Sessionleiter:
Prof. Gregory Offer, Imperial College London
Prof. Dr. Jens Tübke, Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Ort: Roter Saal, 1. OG

15:35Investigation of reproducibly induced internal shorts and self-heating of aged commercial 18650 cells caused by Li-platingMark Junker
Co-Autoren:
Heinrich Ditler, Remi Philippe, Jannis Schumann, Dirk Uwe Sauer
RWTH Aachen University | ISEA
15:55An Efficient Workflow for Li-Plating DetectionDr. rer. nat. Thomas Waldmann
Co-Autoren:
Marius Flügel, Christin Hogrefe, Ivana Pivarníková, Marius Bolsinger, Neelima Paul, Timo Danner, Michael Kasper, Volker Knoblauch, Peter Müller-Buschbaum, Ralph Gilles, Arnulf Latz, Markus Hölzle, Margret Wohlfahrt-Mehrens
ZSW – Zentrum für Sonnenenergie- und Wasserstoff-Forschung, Baden-Württemberg
16:15Statistical lifetime analysis of lithium-ion batteries based on tailored accelerated aging testsProf. Dr. Maria Kateri
Co-Autoren:
Prof. Dr. Udo Kamps (Chair of Statistics, ISW, RWTH Aachen University)
RWTH Aachen University
16:35Lithium Plating at the Cell Edge during Cycling in Lithium-Ion Batteries: Simulation and ExperimentThomas Roth
Co-Autoren:
Fabian Oehler, Alexander Frank, Andreas Graule, Simon Kücher, Andreas Jossen
Technical University of Munich
15:3510.04.2024
Session 2B


15:35 Uhr
Mark Junker
Co-Autoren:
Heinrich Ditler, Remi Philippe, Jannis Schumann, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Investigation of reproducibly induced internal shorts and self-heating of aged commercial 18650 cells caused by Li-plating
15:5510.04.2024
Session 2B


15:55 Uhr
Dr. rer. nat. Thomas Waldmann
Co-Autoren:
Marius Flügel, Christin Hogrefe, Ivana Pivarníková, Marius Bolsinger, Neelima Paul, Timo Danner, Michael Kasper, Volker Knoblauch, Peter Müller-Buschbaum, Ralph Gilles, Arnulf Latz, Markus Hölzle, Margret Wohlfahrt-Mehrens
ZSW – Zentrum für Sonnenenergie- und Wasserstoff-Forschung, Baden-Württemberg

An Efficient Workflow for Li-Plating Detection
16:1510.04.2024
Session 2B


16:15 Uhr
Prof. Dr. Maria Kateri
Co-Autoren:
Prof. Dr. Udo Kamps (Chair of Statistics, ISW, RWTH Aachen University)
RWTH Aachen University

Statistical lifetime analysis of lithium-ion batteries based on tailored accelerated aging tests
16:3510.04.2024
Session 2B


16:35 Uhr
Thomas Roth
Co-Autoren:
Fabian Oehler, Alexander Frank, Andreas Graule, Simon Kücher, Andreas Jossen
Technical University of Munich

Lithium Plating at the Cell Edge during Cycling in Lithium-Ion Batteries: Simulation and Experiment

15:35 – 16:55

Session 2C: Material Level 1 - Diverse
Sessionleiter:
Dr. Falko Schappacher, WWU Münster | MEET
Philipp Wunderlich, umlaut SE

Ort: Blauer Saal

15:35Solvent-free processing of sodium ion battery anode and cathode from commercial materials towards scalable production of SIB full-cellsJohannes Kühn
Co-Autoren:
Florian Schmidt, Pascal Seete, Dr. Benjamin Schumm, Dr. Thomas Abendroth, Dr.Holger Althues, Prof. Dr. Stefan Kaskel
Fraunhofer Institute of Material and Beam Technology IWS
15:55Synthesis of Li-/Mn-rich Cathode Material and Investigations of its properties in Lithium-ion BatteryPhD Hyuck Hur
Co-Autoren:
Pranti Sutar, Soundharrajan Vaiyapuri, Linus Voigt, Martin Winter, Johannes Kasnatscheew
LG Energy Solution / MEET
16:15Challenges and Strategies to Enable Mg-Ion-Based Dual-Ion BatteriesVerena Küpers
Co-Autoren:
Dr. Martin Kolek, Dr. Peter Bieker, Dr. Marian Stan, Dr. Tobias Placke, Prof. Dr. Martin Winter
University of Münster | MEET Battery Research Center
16:35Separating Initial Loss from Storage Capacity: Core-Shell Materials as Advanced Anode Materials for Sodium Ion BatteriesDr. Jonas Krug von Nidda
Co-Autoren:
W. Shu-Han, P. Appel, T.-P. Fellinger
Bundesanstalt für Materialforschung und -prüfung (BAM)
15:3510.04.2024
Session 2C


15:35 Uhr
Johannes Kühn
Co-Autoren:
Florian Schmidt, Pascal Seete, Dr. Benjamin Schumm, Dr. Thomas Abendroth, Dr.Holger Althues, Prof. Dr. Stefan Kaskel
Fraunhofer Institute of Material and Beam Technology IWS

Solvent-free processing of sodium ion battery anode and cathode from commercial materials towards scalable production of SIB full-cells
15:5510.04.2024
Session 2C


15:55 Uhr
PhD Hyuck Hur
Co-Autoren:
Pranti Sutar, Soundharrajan Vaiyapuri, Linus Voigt, Martin Winter, Johannes Kasnatscheew
LG Energy Solution / MEET

Synthesis of Li-/Mn-rich Cathode Material and Investigations of its properties in Lithium-ion Battery
16:1510.04.2024
Session 2C


16:15 Uhr
Verena Küpers
Co-Autoren:
Dr. Martin Kolek, Dr. Peter Bieker, Dr. Marian Stan, Dr. Tobias Placke, Prof. Dr. Martin Winter
University of Münster | MEET Battery Research Center

Challenges and Strategies to Enable Mg-Ion-Based Dual-Ion Batteries
16:3510.04.2024
Session 2C


16:35 Uhr
Dr. Jonas Krug von Nidda
Co-Autoren:
W. Shu-Han, P. Appel, T.-P. Fellinger
Bundesanstalt für Materialforschung und -prüfung (BAM)

Separating Initial Loss from Storage Capacity: Core-Shell Materials as Advanced Anode Materials for Sodium Ion Batteries

Plenarvorträge // Keynote Speaker

Sessionleiter: Prof. Dr. Dirk Uwe Sauer, Prof. Dr. Martin Winter

Ort: Congress Saal

17:00 – 17:35

Building Better Batteries Faster

Prof. William Chueh
Stanford University

17:35

Ende des ersten Tages

Spannende Batterieseminare 2024 www.hdt.de

Abendveranstaltung

19:00 – 22:00

Abendveranstaltung

Die Abendveranstaltung findet in der  Jovel Music Hall, Albersloher Weg 54, 48155 Münster, statt.

Das Abendprogramm
19:00 | Beginn Abendempfang und Catering

20:00 | Vortrag Weltrekordversuch in der Formula Student, Matthias Rohrer, AMZ Racing, Zürich

Mehr erfahren

20:30 | Posterpreisverleihung 

21:00 | DJ und Tanz 

Informationen zur Jovel Music Hall finden Sie unter der Internetadresse www.jovel.de

Pack more power into longer-lasting energy source

Tag 2 // 11. April 2024

08:45 – 09:00

Begrüßung zum zweiten Tag

Ort: Congress Saal

Plenarvorträge // Keynote Speaker

Sessionleiter: Prof. Dr. Dirk Uwe Sauer, Prof. Dr. Martin Winter

Ort: Congress Saal

09:00 – 09:35

Recent Activities in Research and Development on Next Generation Batteries in Japan

Prof. Kohei Uosaki
Center for Research and Development Strategy (CRDS), Japan Science and Technology Agency (JST)

09:35 – 10:10

20 years of process development for Li-batteries recycling – current status and open issues

10:10 – 10:25

kurze Pause

10:25 – 11:00

Non-Li based systems: a down to the earth vision

Prof. Maria Rosa Palacin Peiró
Institut de Ciéncia de Materials de Barcelona

11:00 – 11:35

Technology lines in materials and production engineering for Northvolt’s European gigafactories

Postersession und Ausstellung

11:35 – 12:35

Postersession 3 (ungerade Posternummern) und Ausstellung
Posterbewertung

11:45 – 13:15

Mittagspause und Ausstellung

Parallelsession 3

13:15 – 14:35

Session 3A: Cell Level 3 – Na-Ion Batteries & Thermal Characterization
Sessionleiter:
Prof. Dr.-Ing. Ulrike Krewer, IAM-WET, KIT Karslruhe
Dr. Andreas Fischer, BASF SE

Ort: Congress Saal

13:15Comparing the Electrical Performance of Commercial Sodium Ion Batteries and Lithium Iron Phosphate CellsMathias Rehm
Co-Autoren:
Marco Fischer, Manuel Rubio Gomez, Andreas Jossen
Technische Universität München
13:35First Full Cell Parameterization and Validation of a Commercial Sodium-Ion Battery for a Physico-Chemical Battery ModelHendrik Laufen
Co-Autoren:
Moritz Schütte, Daniel Luder, Heinrich Ditler, Sebastian Klick, Mark Junker, Gereon Stahl, Fabian Frie, Dirk Uwe Sauer
RWTH Aachen University | ISEA
13:55Investigation of Lithium-ion Batteries’ Thermal Decomposition using High Temperature Online Electrochemical Mass SpectrometryLeon Schmidt
Co-Autoren:
Kie Hankins, Lars Bläubaum, Michail Gerasimov, Ulrike Krewer
Karlsruhe Institute of Technology
14:15Influence of Thermal Runaway Trigger on the Failing Behavior of Automotive Lithium-Ion BatteriesDipl.-Ing. Christiane Essl
Co-Autoren:
Andrey Golubkov
Virtual Vehicle Research GmbH
13:1511.04.2024
Session 3A


13:15 Uhr
Mathias Rehm
Co-Autoren:
Marco Fischer, Manuel Rubio Gomez, Andreas Jossen
Technische Universität München

Comparing the Electrical Performance of Commercial Sodium Ion Batteries and Lithium Iron Phosphate Cells
13:3511.04.2024
Session 3A


13:35 Uhr
Hendrik Laufen
Co-Autoren:
Moritz Schütte, Daniel Luder, Heinrich Ditler, Sebastian Klick, Mark Junker, Gereon Stahl, Fabian Frie, Dirk Uwe Sauer
RWTH Aachen University | ISEA

First Full Cell Parameterization and Validation of a Commercial Sodium-Ion Battery for a Physico-Chemical Battery Model
13:5511.04.2024
Session 3A


13:55 Uhr
Leon Schmidt
Co-Autoren:
Kie Hankins, Lars Bläubaum, Michail Gerasimov, Ulrike Krewer
Karlsruhe Institute of Technology

Investigation of Lithium-ion Batteries’ Thermal Decomposition using High Temperature Online Electrochemical Mass Spectrometry
14:1511.04.2024
Session 3A


14:15 Uhr
Dipl.-Ing. Christiane Essl
Co-Autoren:
Andrey Golubkov
Virtual Vehicle Research GmbH

Influence of Thermal Runaway Trigger on the Failing Behavior of Automotive Lithium-Ion Batteries

13:15 – 14:35

Session 3B: Material Level 2 - Solid State Batteries
Sessionleiter:
Dr. Holger Althues, Fraunhofer Institute for Material and Beam Technology IWS
Dr. Philipp Wunderlich, Accenture Industry X

Ort: Roter Saal, 1. OG

13:15Benchmark and teardown of a commercial solid-state batteryDr. rer. nat. Jannis Küpper
Co-Autoren:
Dr. Stefan Beschnitt, Dr. Seyedhosein Payandeh, Thomas Deutschen, Fikret Atan, Christopher Herget, Hendrik Löbberding, Dr. Andreas Averberg, Matthias Rudolph, Dr. Michael Stapelbroek
FEV Europe GmbH
13:35Current collector-free lithium metal anodePhD Sofia PerticarariBlue Solutions
13:55Quantifying the Contact Loss of Battery Active Material ParticlesDr. Simon Wiemers-Meyer
Co-Autoren:
Marc Vahnstiege, Till-Niklas Kröger, Patrick Harte, Thomas Beuse, Mathis Jan Wölke, Sven Klein, Markus Börner, Martin Winter, Sascha Nowak and Simon Wiemers-Meyer
University of Münster | MEET Battery Research Center
14:15Transition-Metal Interdiffusion in Solid-State Batteries Revealed by Cryo-TEMPhD Letian Li
Co-Autoren:
Ruizhuo Zhang, Florian Strauss, Lin Jiang, Lee Casalena, Jürgen Janek, Aleksandr Kondrakovae, Torsten Brezesinskia
Thermo Fisher Scientific
13:1511.04.2024
Session 3B


13:15 Uhr
Dr. rer. nat. Jannis Küpper
Co-Autoren:
Dr. Stefan Beschnitt, Dr. Seyedhosein Payandeh, Thomas Deutschen, Fikret Atan, Christopher Herget, Hendrik Löbberding, Dr. Andreas Averberg, Matthias Rudolph, Dr. Michael Stapelbroek
FEV Europe GmbH

Benchmark and teardown of a commercial solid-state battery
13:3511.04.2024
Session 3B


13:35 Uhr
PhD Sofia Perticarari
Blue Solutions

Current collector-free lithium metal anode
13:5511.04.2024
Session 3B


13:55 Uhr
Dr. Simon Wiemers-Meyer
Co-Autoren:
Marc Vahnstiege, Till-Niklas Kröger, Patrick Harte, Thomas Beuse, Mathis Jan Wölke, Sven Klein, Markus Börner, Martin Winter, Sascha Nowak and Simon Wiemers-Meyer
University of Münster | MEET Battery Research Center

Quantifying the Contact Loss of Battery Active Material Particles
14:1511.04.2024
Session 3B


14:15 Uhr
PhD Letian Li
Co-Autoren:
Ruizhuo Zhang, Florian Strauss, Lin Jiang, Lee Casalena, Jürgen Janek, Aleksandr Kondrakovae, Torsten Brezesinskia
Thermo Fisher Scientific

Transition-Metal Interdiffusion in Solid-State Batteries Revealed by Cryo-TEM

13:15 – 14:35

Session 3C: Pack Level 2 – Pack Safety
Sessionleiter:
Dr. Thomas Soczka-Guth, Daimler AG
Dr. Dominik Schulte, BatterieIngenieure GmbH

Ort: Blauer Saal

13:15Early Detection of Safety-Critical Lithium Plating in Fast Charging of Lithium-Ion BatteriesM. Sc. Julian Ulrich
Co-Autoren:
André Weber, Ulrike Krewer
Karlsruher Institut für Technologie, Institut für Angewandte Materialien - Elektrochemische Technologien
13:35Chemical and Thermal Modelling of Thermal Runaway and Propagation Processes of Lithium-Ion BatteriesNiklas Weber
Co-Autoren:
Sebastian Schuhmann, Jens Tübke, Hermann Nirschl
Karlsruher Institut für Technologie
13:55Comparison of Internal Short-Circuit diagnosis methods with synthetic and experimental dataMSc Jon Perez
Co-Autoren:
Mikel Arrinda, Mikel Oyarbide, Haritz Macicior, Erik Garayalde, Unai Iraola
Fundación CIDETEC
14:15Safety Assessment of Lithium Plating in Lithium-Ion Batteries for Use in Second-Life ApplicationsMax Feinauer
Co-Autoren:
Dr. Gabriela Gerosa, Michael Wörz, Margret Wohlfahrt-Mehrens, Olaf Böse, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
13:1511.04.2024
Session 3C


13:15 Uhr
M. Sc. Julian Ulrich
Co-Autoren:
André Weber, Ulrike Krewer
Karlsruher Institut für Technologie, Institut für Angewandte Materialien - Elektrochemische Technologien

Early Detection of Safety-Critical Lithium Plating in Fast Charging of Lithium-Ion Batteries
13:3511.04.2024
Session 3C


13:35 Uhr
Niklas Weber
Co-Autoren:
Sebastian Schuhmann, Jens Tübke, Hermann Nirschl
Karlsruher Institut für Technologie

Chemical and Thermal Modelling of Thermal Runaway and Propagation Processes of Lithium-Ion Batteries
13:5511.04.2024
Session 3C


13:55 Uhr
MSc Jon Perez
Co-Autoren:
Mikel Arrinda, Mikel Oyarbide, Haritz Macicior, Erik Garayalde, Unai Iraola
Fundación CIDETEC

Comparison of Internal Short-Circuit diagnosis methods with synthetic and experimental data
14:1511.04.2024
Session 3C


14:15 Uhr
Max Feinauer
Co-Autoren:
Dr. Gabriela Gerosa, Michael Wörz, Margret Wohlfahrt-Mehrens, Olaf Böse, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Safety Assessment of Lithium Plating in Lithium-Ion Batteries for Use in Second-Life Applications

Postersession und Ausstellung

14:35 – 15:35

Postersession 4 (gerade Posternummern) und Ausstellung
Posterbewertung

Spannende Batterieseminare 2024
www.hdt.de

Parallelsession 4

15:35 – 16:55

Session 4A: Material Level 3 - Li-Ion Batteries
Sessionleiter:
Dr. rer. Nat. Thomas Waldmann, Center for Solar Energy and Hydrogen Research (ZSW)
Prof. Dr. Hans-Georg Schweiger, TH Ingolstadt

Ort: Congress Saal

15:35Operando and In Situ Study on the Lithium Redistribution within Silicon-Graphite Composite Electrodes in Li-Ion Full CellsChristin Hogrefe
Co-Autoren:
Neelima Paul (MLZ), Lioba Boveleth (DLR, HIU), Marius Bolsinger (HSAA), Marius Flügel, Timo Danner (DLR, HIU), Arnulf Latz (DLR, HIU), Ralph Gilles (MLZ), Volker Knoblauch (HSAA), Margret Wohlfahrt-Mehrens, Markus Hölzle, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)
15:55An investigation of the cathode electrolyte interphase (CEI) formation of Ni-rich layered materials by Ni ion catalyzation: monolayer CEI formation from an oligomerPhD Fu-Ming WangNational Taiwan University of Science and Technology
16:15Understanding and Developing High Voltage Li-Ion Batteries via Commercial ElectrolytesDr. Johannes KasnatscheewUniversität Münster
16:35Machine Learning-guided Optimization of the Ionic Conductivity with the Liquid Electrolyte Composition Analysis (LECA) packageMSc Mirko Fischer
Co-Autoren:
Harrison Martin, Moumita Maiti, Anand Narayanan Krishnamoorthy, Diddo Diddens, Andreas Heuer, Peng Yan, Christian Wölke, Isidora Cekic-Laskovic
Universität Münster
15:3511.04.2024
Session 4A


15:35 Uhr
Christin Hogrefe
Co-Autoren:
Neelima Paul (MLZ), Lioba Boveleth (DLR, HIU), Marius Bolsinger (HSAA), Marius Flügel, Timo Danner (DLR, HIU), Arnulf Latz (DLR, HIU), Ralph Gilles (MLZ), Volker Knoblauch (HSAA), Margret Wohlfahrt-Mehrens, Markus Hölzle, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung (ZSW)

Operando and In Situ Study on the Lithium Redistribution within Silicon-Graphite Composite Electrodes in Li-Ion Full Cells
15:5511.04.2024
Session 4A


15:55 Uhr
PhD Fu-Ming Wang
National Taiwan University of Science and Technology

An investigation of the cathode electrolyte interphase (CEI) formation of Ni-rich layered materials by Ni ion catalyzation: monolayer CEI formation from an oligomer
16:1511.04.2024
Session 4A


16:15 Uhr
Dr. Johannes Kasnatscheew
Universität Münster

Understanding and Developing High Voltage Li-Ion Batteries via Commercial Electrolytes
16:3511.04.2024
Session 4A


16:35 Uhr
MSc Mirko Fischer
Co-Autoren:
Harrison Martin, Moumita Maiti, Anand Narayanan Krishnamoorthy, Diddo Diddens, Andreas Heuer, Peng Yan, Christian Wölke, Isidora Cekic-Laskovic
Universität Münster

Machine Learning-guided Optimization of the Ionic Conductivity with the Liquid Electrolyte Composition Analysis (LECA) package

15:35 – 16:55

Session 4B: Life-Cycle 2 - Recycling
Sessionleiter:
Prof. Dr. Bernd Friedrich, RWTH Aachen University
Prof. Dr. Petr Novák, TU Braunschweig

Ort: Roter Saal, 1. OG

15:35Influence of Process Parameters in Direct Aqueous Recycling of NMC811 CathodesFelix Nagler
Co-Autoren:
Nino Christian, Leonhard Kolb, Philip Daubinger, Andreas Flegler, Michael Hofmann, Guinevere A. Giffin
Fraunhofer ISC
15:55Influences on the properties of black mass from mechanical lithium-ion battery recyclingChristian Wilke
Co-Autoren:
Christian Wilke, Alexandra Kaas, Denis Werner, Jannik Born, Harald Zetzener, Arno Kwade, Urs A. Peuker
TU Bergakademie Freiberg
16:15Direct Recycling of Ni-rich Layered Oxide-based Cathodes from Spent Lithium Ion BatteriesMaike Michelle Gnutzmann
Co-Autoren:
Ardavan Makvandi, Julius Buchmann, Bianca Helm, Aurora Gomez-Martin, Martin Winter, Johannes Kasnatscheew
Universität Münster
16:35Effects of early lithium removal on the hydro- and pyrometallurgical treatment of battery black mass – A general process description from a technical point of viewAlexander Nickol
Co-Autoren:
Hans-Jürgen Friedrich, Prof. Alexander Michaelis
Fraunhofer IKTS
15:3511.04.2024
Session 4B


15:35 Uhr
Felix Nagler
Co-Autoren:
Nino Christian, Leonhard Kolb, Philip Daubinger, Andreas Flegler, Michael Hofmann, Guinevere A. Giffin
Fraunhofer ISC

Influence of Process Parameters in Direct Aqueous Recycling of NMC811 Cathodes
15:5511.04.2024
Session 4B


15:55 Uhr
Christian Wilke
Co-Autoren:
Christian Wilke, Alexandra Kaas, Denis Werner, Jannik Born, Harald Zetzener, Arno Kwade, Urs A. Peuker
TU Bergakademie Freiberg

Influences on the properties of black mass from mechanical lithium-ion battery recycling
16:1511.04.2024
Session 4B


16:15 Uhr
Maike Michelle Gnutzmann
Co-Autoren:
Ardavan Makvandi, Julius Buchmann, Bianca Helm, Aurora Gomez-Martin, Martin Winter, Johannes Kasnatscheew
Universität Münster

Direct Recycling of Ni-rich Layered Oxide-based Cathodes from Spent Lithium Ion Batteries
16:3511.04.2024
Session 4B


16:35 Uhr
Alexander Nickol
Co-Autoren:
Hans-Jürgen Friedrich, Prof. Alexander Michaelis
Fraunhofer IKTS

Effects of early lithium removal on the hydro- and pyrometallurgical treatment of battery black mass – A general process description from a technical point of view

15:35 – 16:55

Session 4C: Pack Level 3 - Modelling & Machine learning
Sessionleiter:
Dr. Peter Pilgram, Audi AG
Armin Warm, Ford

Ort: Blauer Saal

15:35Machine learning-based fast charging of lithium-ion batteries by monitoring and controlling internal physical statesDr.-Ing. Weihan Li
Co-Autoren:
Dirk Uwe Sauer
RWTH Aachen University | ISEA
15:55Modeling the change of the open-circuit voltage curve of commercial lithium-ion batteries during agingM.Sc. Alexander Karger
Co-Autoren:
Julius Schmitt, Cedric Kirst, Jan P. Singer, Leo Wildfeuer, Andreas Jossen
Technische Universität München
16:15Segregating the Degradation Mechanisms in Lithium-Ion Cells during Strongly Accelerated Cyclic Ageing with Critically Extended Voltage RangesM.Sc. Philippa Scharpmann
Co-Autoren:
Robert Leonhardt, Tim Tichter, Anita Schmidt, Julia Kowal, Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung
16:35Enhancing Battery State-of-Health Estimation with Transfer Learning: Leveraging Voltage Window Features and Combining Synthetic and Real Cell Data in FCNN ModelsMarkel Azkue
Co-Autoren:
I. Gandiaga, S. Bockrath, E. Miguel, L. Oca, U. Iraola
Ikerlan
15:3511.04.2024
Session 4C


15:35 Uhr
Dr.-Ing. Weihan Li
Co-Autoren:
Dirk Uwe Sauer
RWTH Aachen University | ISEA

Machine learning-based fast charging of lithium-ion batteries by monitoring and controlling internal physical states
15:5511.04.2024
Session 4C


15:55 Uhr
M.Sc. Alexander Karger
Co-Autoren:
Julius Schmitt, Cedric Kirst, Jan P. Singer, Leo Wildfeuer, Andreas Jossen
Technische Universität München

Modeling the change of the open-circuit voltage curve of commercial lithium-ion batteries during aging
16:1511.04.2024
Session 4C


16:15 Uhr
M.Sc. Philippa Scharpmann
Co-Autoren:
Robert Leonhardt, Tim Tichter, Anita Schmidt, Julia Kowal, Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung

Segregating the Degradation Mechanisms in Lithium-Ion Cells during Strongly Accelerated Cyclic Ageing with Critically Extended Voltage Ranges
16:3511.04.2024
Session 4C


16:35 Uhr
Markel Azkue
Co-Autoren:
I. Gandiaga, S. Bockrath, E. Miguel, L. Oca, U. Iraola
Ikerlan

Enhancing Battery State-of-Health Estimation with Transfer Learning: Leveraging Voltage Window Features and Combining Synthetic and Real Cell Data in FCNN Models

17:10 – 17:30

Zusammenfassung und Ausblick

Prof. Dr. Martin Winter
Universität Münster

17:30

Ende der Konferenz / optional: Führungen durch FFB oder das MEET (s.u.)

17:45

Busabfahrt vor dem Kongressgebäude

18:00

Führungen über das Gelände der FFB PreFab oder das MEET Batterieforschungszentrum

Exklusiv für Teilnehmer*innen. Die Teilnehmerzahlen sind begrenzt.
Es ist eine Online-Anmeldung (kostenfrei) notwendig.

ca. 19:15

Rückkehr der Busse

Spannende Batterieseminare 2024
www.hdt.de

Postersession 1 „Material Level“

P1-002Powder characterization: the first step for improving dry electrode manufacturingFilip Francqui
Co-Autoren:
Filip Francqui, Stéphane Caubergh, Marcella Horst
Granutools
P1-003Manufacture of Na-ion solid-state electrolytes for batteriesPhD Student Celina DlofoSwansea University
P1-004Influence of mixer stressing conditions on the microstructural properties and electrochemical performance of all-solid-state battery cathodesM. Sc. Finn Frankenberg
Co-Autoren:
Maximilian Kissel, Prof. Dr. Jürgen Janek, Prof. Dr.-Ing. Arno Kwade
Institut für Partikeltechnik
P1-005Synergistic impact of electrolyte additives enhancing the high-voltage performance of LMR-NMC║μ-Si cell chemistryDr. Marian Cristian Stan
Co-Autoren:
Gerrit Overhoff, Hyung-Tae Kim, Nick Fehlings, Martin Winter, Gunther Brunklaus and Isidora Cekic-Laskovic
Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung (IEK-12) Helmholtz-Institute Münster (HI MS)
P1-006Gelation Behavior of NMP-processed NMC811 Electrode Slurries During Exposure to Moisture and the Influence on the Electrode PerformanceMaster of Science in Chemistry Markus Binder
Co-Autoren:
Matthias Kuenzel, Rene Jakelski, Dominic Bresser
Karlsruher Institut für Technologie
P1-007Solid-state Li metal battery with hybrid electrolyte: An overview of the Horizon Europe SEATBELT projectPhD BENOIT CAMPEON
Co-Autoren:
Thomas Boulmier, Adeline Lafort, Sascha Nowak, Ivan Trentin, Nour Daher, Rémi Vincent, Alessandro Tengattini, Claire Testori, Xavier Randrama, Massimo De Pieri, Jan Hilhorst, Ainara Aguadero, Irune Villaluenga, Andere Basterretxea, Pedro Lopez, Sam Cooper, Peter Šiffalovič, Didier Devaux
CNRS LEPMI
P1-008Proof of concept: Ti-doped zinc ferrite for application as cathode material in zinc ion batteriesDr. Kerstin Neuhaus
Co-Autoren:
J. Hopster, S. Krämer, M. Winter
Forschungszentrum Jülich GmbH
P1-009Lithium-rich Antiperovskites as cathode material for Li-ion batteriesDr. Lennart SingerUniversität Heidelberg
P1-010High performance LIC by new Lithium pre-doping using Li2CO3Master Kazuteru UmetsuAsahi Kasei Europe GmbH
P1-011High throughput experimental workflow for accelerated ionic conductivity determination of Na-based battery electrolytesRobert Tobias HinzForschungszentrum Juelich GmbH
P1-012Herstellung, Benetzung und Performance TiC-basierter Gasdiffusionselektroden für Li-Sauerstoff BatterienDr. Daniela Fenske
Co-Autoren:
Marcel Reisch, Julian Schwenzel
Fraunhofer-Institut for Manufacturing and Andvanced Materials IFAM
P1-013Impacts of novel phosphorus-based additives in boosting NMC811||Si-graphite cell performance and safetyBaharehalsadat (Bahareh A.) Sadeghi
Co-Autoren:
Christian Wölke, Mykhailo Shevchuk, Gerd-Volker Röschenthaler, Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich GmbH
P1-015Green High Areal Capacity Composite Cathodes in All Solid-State Batteries – Alternative Cathode ProcessingPascal Glomb
Co-Autoren:
Min-Huei Chiou, Gunther Brunklaus, Martin Winter
Forschungszentrum Juelich | Helmholtz-Institut Münster IEK-12
P1-016A detailed study of humidity-induced degradation of pelletized Li3PS4 solid electrolyte using large-scale instrumentsPhD student Ivan LETEYI MFIBAN
Co-Autoren:
Irina PROFATILOVA, Victor VANPEENE, Vasily TARNOPOLSKIY, Magali REYTIER
Atomic Energy and Alternative Energies Commission (CEA)
P1-017Electrochemical Detection of Inactive Lithium MetalMarvin Mohrhardt
Co-Autoren:
Martin Winter; Gunther Brunklaus
Forschungszentrum Jülich GmbH
P1-018Combinations of polymer-based cathode and electrolyte materials for quasi-solid organic radical batteries enabling high current density applicationsSteffen Oevermann
Co-Autoren:
Min-Huei Chiou, Martin Winter, Gunther Brunklaus
Forschungszentrum Jülich GmbH
P1-019Mechanistic insights into the cycling behavior of sulfur dry-film cathodes for pouch cellsMagdalena FiedlerFraunhofer IWS
P1-020Impact of Electrospun Membranes on the Cell Performance of Lithium-Sulfur BatteriesBärbel Tengen
Co-Autoren:
Martin Winter, Gunther Brunklaus
University of Münster
P1-021The path from manufacturing polymer-based solid-state battery components to testing of ASSBs full cellsM.Sc. Katharina Platen
Co-Autoren:
Frederieke Langer, Julian Schwenzel
Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM
P1-022Multifunctional additive mixture to reduce dendrite formation in zinc-ion batteriesJoachim Hering
Co-Autoren:
Katja R. Kretschmer; Daniel Schröder
Technische Universität Braunschweig
P1-023Towards understanding the structure and dynamics of localized high-concentration battery electrolytesAnne Hockmann
Co-Autoren:
Diddo Diddens, Isidora Cekic-Laskovic, Monika Schönhoff
University of Münster
P1-024Importance of fluorine for high voltage LNMO||SiGr cell chemistryMaike Leopold
Co-Autoren:
Christian Wölke, Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich
P1-025Unraveling the Impact of the Electrolyte Volume on the Capacity Decay of Lithium-Metal BatteriesDominik Weintz
Co-Autoren:
Lukas Stolz, Martin Winter, Isidora Cekic-Laskovic, Johannes Kasnatscheew
Helmholtz-Institut Münster, FZ Jülich
P1-026Evaluation of Artificial Coatings for Polymer-based Lithium Metal BatteriesMaster of Science Annalena Krude
Co-Autoren:
Marvin Mohrhardt, Peter Lennartz, Martin Winter, Gunther Brunklaus
Forschungszentrum Jülich GmbH
P1-027Prelithiated Carbon Nanotubes for Stabilizing Silicon-rich Silicon/Graphite Blend Anodes for High-Energy Density Li-Ion BatteriesMSc Leyla ÜnalForschungszentrum Jülich
P1-028Production of ultra thin lithium metal anodes for solid-state batteries using sputter depositionJulian Brokmann
Co-Autoren:
Matteo Kaminski, Lajos Groffmann, Nikolas Dilger, Sebastian Melzig, Sabrina Zellmer
Fraunhofer IST
P1-029Aluminum-Graphite Batteries: Insights into Self-Discharge ProcessesDr. Franziska Jach
Co-Autoren:
Max Bamberg, Felix Fuhrmann, Martin Eckert, Gero Frisch, Ulrike Wunderwald
Fraunhofer IISB Erlangen
P1-031Direct polysulfides quantification in the electrolytes of Li-S Batteries using HPLC-ICP-MS techniqueAleksei Sadykov
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center
P1-032Molar Fluxes and Cell Constants in Redox-Flow Batteries – Unifying RFB Cell Setups and their Performance ResultsSebastian FrickeHelmholtz-Institut Münster
P1-033Model-based prediction of the electrochemical performance of all-solid-state composite cathodes fabricated by powder aerosol depositionMaximilian Schamel
Co-Autoren:
Michael A. Danzer
Universität Bayreuth
P1-034Fluoroethylene Carbonate Protection Enabled by Novel Additive Stabilizes High-voltage LIBs with SiOx-containing Negative ElectrodeFeleke Berehane Demelash
Co-Autoren:
Anindityo (Tio) Arifiadia, Martin Winter, and Philip Niehoff
University of Münster
P1-035Pioneering Synthesis Routes Investigation for novel Cathode Material Compound Classes of Sodium Ion BatteriesLaura Henrich
Co-Autoren:
Egbert Figgemeier
Institut für Stromrichtertechnik und elektrische Antriebe
P1-036Understanding the Silicon Voltage Hysteresis by considering the impact of the Solid-Electrolyte Interphase (SEI)M.Sc. Lukas Köbbing
Co-Autoren:
Arnulf Latz, Birger Horstmann
German Aerospace Center (DLR) and Helmholtz Institute Ulm (HIU)
P1-037Mitigating Stainless Steel Dissolution in High-Performance Coin Cells with LiFSI-based ElectrolytesPeng Yan
Co-Autoren:
Marian Cristian Stan, Christian Wölke, Bahareh Sadeghi, Rayan Guerdelli, Martin Winter, and Isidora Cekic-Laskovic
Forschungszentrum Jülich
P1-038Synthesis and Electrochemical Characterization of Novel Electrolyte Additive for Lithium-Ion Batteries with Si-based AnodesNoah Schmidt-Meinzer
Co-Autoren:
Ingo Krossing
Freiburger Materialforschungszentrum
P1-039Hierarchically Structured, Porous Carbon Materials for Organic Potassium-Oxygen BatteriesM.Sc. Shikha SinghRWTH Aachen University
P1-041Gathering Intelligence for Intelligent Liquid Elektrolyte Design in Lithium-Sulfur BatteriesFritz Wortelkamp
Co-Autoren:
Christian Wittekind, Ingo Krossing
Universität Freiburg
P1-042Characterization of Interphases formed by Ethylene Carbonate based Electrolyte Additives on High-Voltage Lithium-Ion Battery Electrodes via operando Advanced Raman Spectroscopy TechniquesFelix PfeifferForschungszentrum Jülich GmbH
P1-043Lithium nitrate enriched separators as sacrifical additive in zero-excess lithium metal batteries with carbonate-based electrolytesSilvan Stuckenberg
Co-Autoren:
Marlena M. Bela, Christian-Timo Lechtenfeld, Maximilian Mense, Verena Küpers, Tjark T. K. Ingber, Martin Winter, Marian C. Stan
University of Münster | MEET Battery Research Center
P1-044Correlative Microscopy Analysis for Battery MaterialsYulia Trenikhina
Co-Autoren:
Stephen Kelly, Benjamin Tordoff
Carl Zeiss X-ray Microscopy
P1-045Blocking the Sulfur Shuttle: Synergy between Artificial SEI and Low-Polarity SolventDr. Sven Porath
Co-Autoren:
Ingo Krossing
Cluster of Excellence livMatS, University of Freiburg
P1-046DEVELOPMENT OF NMC622 / LATP COMPOSITE CATHODES FOR HYBRID SOLID STATE LITHIUM BATTERIESPhD Student Amogne Workie YibeltalHelmholtz Institute Ulm (HIU) for electrochemical energy storage, Karlsruhe Institute Technology(KIT)
P1-047Unveiling the Interphases of Solid-State Electrolytes via Operando ATR-FTIR SpectroscopyJian Fen WangJülich Forschungszentrum Helmholtz Institut Münster
P1-048Synthesis of layered oxide cathode active materials using recycled materialsElisabeth Glatt
Co-Autoren:
Martin Menzler, Sebastian Melzig, Sabrina Zellmer
Fraunhofer IST
P1-049Experimental Analysis of External Short-Circuit Scenarios Applied to Lithium-Ion Cells with Silicon-Dominant Anodes under Different Mechanical PressuresFriedrich Sven
Co-Autoren:
Vitaly Savvin
Technical University Munich
P1-050Sulfur-Polyacrylonitrile as an alternative sulfur active material and its processingRobin Moschner
Co-Autoren:
Peter Michalowski, Arno Kwade
TU Braunschweig
P1-051Dilation Investigation of Si-rich Anode Under External Mechanical PressureMaster Sanaz BanifarsiZentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW)
P1-053Potassium Tin Chloride as a new electrode Material for Chloride-Ion BatteriesSoutam Panja
Co-Autoren:
Yidong Miao, Johannes Döhn, Jaehoon Choi, Simon Fleischmann, Shivaraju Guddehalli Chandrappa, Thomas Diemant, Axel Groß, Guruprakash Karkera, Maximilian Fichtner
Helmholtz Institute Ulm (HIU)
P1-054Correlating Silicon utilization, Initial Coulombic Efficiency and Cycle Life in Silicon-Dominant AnodesPhD Peter Kalisvaart
Co-Autoren:
Akam Osmanpour, Vanesa Ruiz, Marco Spreafico, Axel Schonecker
E-magy
P1-056Quantification of the State-Of-Charge Heterogeneity of NMC Cathode Materials using SP-ICP-OESMarc Vahnstiege
Co-Autoren:
Alexandros Tsoufios, Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
Universität Münster
P1-057Determination of the Silicon Content of Lithium Ion Battery Anodes by means of High-Resolution Continuum Source Atomic Absorption SpectroscopyKai Brüning
Co-Autoren:
Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
Universität Münster
P1-058Lithium-, Magnesium-, and Calcium- Salts as Electrolyte Additives for Si-based Anodes in LIBsJulia Meierl
Co-Autoren:
E. Jacob, H. Koger, N. Schmidt-Meinzer, I. Krossing
Universität Freiburg
P1-059Exploring the voltage stability limits of O3-type Li/Mn-rich layered oxide || graphite cellsM.Sc. Anindityo (Tio) Arifiadi
Co-Autoren:
Tobias Brakea, Christian Lechtenfelda, Stefan van Wickerena, Feleke Demelasha, Martin Wintera,b, Johannes Kasnatscheew
University of Münster | MEET Battery Research Center
P1-060Modelling the accelerated electrolyte wetting in battery cell manufacturing by process and product propertiesJohannes Wanner
Co-Autoren:
Matthias Burgard, Ricardo Kleinert, Nabih Othman, Julian Grimm, Kai Peter Birke
Fraunhofer IPA
P1-061Modelling the accelerated electrolyte wetting in battery cell manufacturing by process and product propertiesJohannes Wanner
Co-Autoren:
Matthias Burgard, Ricardo Kleinert, Nabih Othman, Julian Grimm, Kai Peter Birke
Fraunhofer Institute for Manufacturing Engineering and Automation IPA
P1-062What’s Cracking? Deep Investigation of aged Solid-State Electrolyte Lithium Sulfur Batteries via Time of Flight Secondary Ion Mass Spectrometry.Niklas AbkeUniversity of Münster | MEET Battery Research Center
P1-063Tuning the artificial cathode electrolyte interphase formation as coating for cathode active materials in solid-state batteriesMaximilian Kissel
Co-Autoren:
Thomas Demuth, Felix Walther, Jonas Hertle, Kerstin Volz, Jürgen Janek
Justus-Liebig-Universität Gießen
P1-064Synthesis and Characterization of the Na3PS4 Solid Electrolyte for Sodium Solid State BatteriesDr. Leticia Trezecik Silvano
Co-Autoren:
Volker Knoblauch, Pinar Kaya
Hochschule Aalen
P1-065The Influence of the Copper Current Collector Structure on the Electrochemical Performance and Cycle Life of Lithium Metal BatteriesFrederik Püttmann
Co-Autoren:
Jana Soborka, Isabelle Hoffmann, Philip Niehoff, Markus Börner, Martin Winter
University of Münster | MEET Battery Research Center
P1-066Novel phospholane additivesenhancing electrochemical performance of LMR-NMC || graphite cell chemistryDoctor Hyung-Tae Kim
Co-Autoren:
Kirstin Darida, Gerrit Overhoff, Marian Cristian Stan, Martin Winter, Isidora Cekic-Laskovic
LG Energy Solution / Helmholtz-Institute Muenster
P1-067Polymer Blends as novel Binder Systems for Li-Ion BatteriesAyse Yarangünü
Co-Autoren:
Dr. rer. nat Maja W. Kandula
TU Braunschweig, Institut für Füge- und Schweißtechnik
P1-068Sodium ion Battery as next generation Battery Technology: Investigation of NMO as promising Cathode material and systematic study for its slurry preparation for manufacturing industrial production.M.sc. Kriss-Kevin Kasten
Co-Autoren:
P. Michalowski, A. Kwade
Institut für Partikeltechnik, Technische Universität Braunschweig
P1-069Microstructural Design of Sulfide-based Composite Cathodes for All-Solid-State BatteriesM.Sc. Elias Reisacher
Co-Autoren:
Nikolaos Papadopoulos, Tim Schubert, Pinar Kaya, Volker Knoblauch
Hochschule Aalen
P1-070Development of a rechargeable jelly roll Zinc/Manganese batteryM. Sc Jithin Antony
Co-Autoren:
W. Peters, J.F.Drillet
DECHEMA Forschungsinstitut
P1-071Pre-Lithiation of Silicon Electrodes Using Physical Vapor DepositionLaurin Profanter
Co-Autoren:
Aleksei Kolesnikov, Anindityo Arifadi, Nick Fehlings, Ilha Lee, Martin Winter, Johannes Kasnatscheew
Universität Münster
P1-072Influence of the Densification Process on the Microstructure of Li6PS5Cl-Based Slurry-Cast Separators and Composite Cathodes for All-Solid-State BatteriesMaximilian Straub
Co-Autoren:
Elias Reisacher, Pinar Kaya, Volker Knoblauch
Aalen University of applied sciences
P1-073The manufacturing and advanced characterization of the porous Xerogel Gas Diffusion Electrodes (XGDEs) for Calcium-Air (Ca-Air) BatteriesDr. Khrystyna Yezerska
Co-Autoren:
D. Fenske, J. Schwenzel
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung – IFAM
P1-075Influence of Negative Electrode Coatings in All-Solid-State Lithium Metal Batteries on the Electrochemical PerformanceArndt Strohschein
Co-Autoren:
Jannis Busch, Lenard Hanf, Marlena Bela, Sascha Nowak, Martin Winter, Simon Wiemers-Meyer
University of Münster | MEET Battery Research Center
P1-076Multi-fidelity Bayesian optimization of prelithiation process for lithium-ion batteries: Combining multi-scale experimentsDr. Akihiro Yamashita
Co-Autoren:
Hyunsang Joo, Benedikt Konersmann, Egbert Figgemeier
Forschungszentrum Jülich
P1-077Prismatic cell housings for future automotive cell applicationsDr.-Ing. Michael Hein
Co-Autoren:
Martin Sedlmair M.Sc., Christian Reumüller M.Sc., Dr.-Ing. Ansgar Damm, Dr. Robert Braun
HOERBIGER Antriebstechnik Holding GmbH
P1-078PVDF/NMC622 cathode slurry preparation with an alternative organic solvent to replace NMPDr.rer.nat. Helene Jeske
Co-Autoren:
Ayse Yarangünü, Maja Kandula, Klaus Dilger
TU Braunschweig, Insitute of Joining and Welding
P1-079Post-Mortem Analysis of an All-Solid-State Battery with a Hybrid Polymer and Ceramic ElectrolyteM. Sc. Alexander Grade
Co-Autoren:
Emmanuel Ezeoba, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P1-080Manufacturing process of Si-based anodes using nature inspired polydopamineJingyu Xie
Co-Autoren:
Christina Roth, Karl-Heinz Pettinger
Technology Centre Energy, Landshut University of Applied Sciences
P1-081Influence of Modified Sugar Alcohols on the Electrochemical Stability Window in Aqueous ElectrolytesSusanna Krämer
Co-Autoren:
Diddo Diddens, Martin Winter and Mariano Grünebaum
Forschungszentrum Jülich GmbH
P1-082Improving the performance of an Al-Graphite cell with reduced electrolyte costM.Sc Charan Mukundan
Co-Autoren:
Jean-Francois Drillet
Dechema Forschungsinstitut
P1-083Opportunities and Challenges of the Densification of Sulfide-Based Separators for Solid-State BatteriesHeck Carina
Co-Autoren:
Timon Scharmann, Markus Osenberg, Alexander Diener, Ingo Manke, Peter Michalowski, Arno Kwade
TU Braunschweig - Institute for Particle Technology
P1-084Influence of Silicon as Negative Electrode Active Material on the Safety of Lithium Ion Batteries: Thermal Investigations from Material to Cell LevelLukas Schrief
Co-Autoren:
Lukas Hellweg, Iris Dienwiebel, Uta Rodehorst, Markus Börner, Martin Winter
University of Münster | MEET Battery Research Center
P1-086Liquid Gas Chemistry for Calcium Metal BatteriesEike Jacob
Co-Autoren:
Ingo Krossing
University of Freiburg
P1-087Coarse-Grained and Atomistic Simulation of Dendrite Growth in Lithium Metal BatteriesLen Kimms
Co-Autoren:
Diddo Diddens, Andreas Heuer
Universität Münster
P1-088Investigation of the Influence of Silicon Oxide Content on Electrolyte Degradation, Gas Evolution, and Thickness Change in Silicon Oxide/Graphite Composite Anodes for Li-Ion Cells Using Operando TechniquesM.Sc. Jan Petit
Co-Autoren:
Philipp Heugel, Franziska Klein, Jens Tübke
Fraunhofer Institute for Chemical Technology ICT
P1-089Practical Evaluation of Different Electrode Designs with Silicon-based Active Materials - from pure Graphite to pure SiliconLara Kersting
Co-Autoren:
Rebekka Tien, Anna Gerlitz, Martin Winter, Markus Börner
University of Münster
P1-090Pouch cell design for aluminum-graphite batteriesDr. Ulrike Wunderwald
Co-Autoren:
Martin Eckert, Jacob Klink, Ngoc-Tram Nguyen, Franziska Jach, Frank Deblon, Gero Frisch, Ralf Benger, Ines Hauer
Fraunhofer IISB
P1-091Quasi-Solid Single-Ion Conducting Block Copolymer for Li-Sulfur batteriesDoctor KUN-LING LIU
Co-Autoren:
Annalena Krude, Peter Lennartz, Marvin Mohrhardt, Niklas Abke, Sascha Nowak, Holger Althues, Stefan Kaskel, Martin Winter, and Gunther Brunklaus
Forschungszentrum Jülich
P1-092Influence of Graphite-Silicon Anode Properties on the PVD Prelithiation ProcessM. Sc. Lars Oliver Schmidt
Co-Autoren:
Houssin Wehbe, Sven Hartwig, Maja W. Kandula
TU Braunschweig, Institut für Füge- und Schweißtechnik
P1-093Mn-Doped V2C MXenes as Anode Materials for Li-Ion BatteriesTobias König
Co-Autoren:
Peng Guo, Lennart Singer, Tom Wickenhäuser, Michael Zharnikov, Peter Comba, Rüdiger Klingeler
Kirchhoff-Institut für Physik, Universität Heidelberg
P1-094A Physical Approach to Practical Applications of Lithium Metal Anode Using High-Flatness Cu Mesh Inducing Epitaxial Li PlatingPh.D. / Integrated Course Jihan Park
Co-Autoren:
Minjoon Park
Pusan National University
P1-095The recycling of used LMO cathode active material for high-voltage redox flow batteriesbachelor Duho HanPusan National University
P1-096High-Resolution X-ray Microscopy (XRM) for the characterization of Li-Ion BatteriesAndreas Kopp
Co-Autoren:
Tim Schubert, Christiana Malchus, Timo Bernthaler, Gerhard Schneider
Hochschule Aalen
P1-098PEO Solid State Electrolytes - The Influence of Electrolyte Degradation on NMC622 ‖ Li metal cellsLukas Herbers
Co-Autoren:
Jaroslav Minář, Silvan Stuckenberg, Verena Küpers, Debbie Berghus, Sascha Nowak, Martin Winter, Peter Bieker
University of Münster | MEET Battery Research Center
P1-099Factors influencing the performance of copper compounds for zinc air flow battery applicationVinod-Kumar Banoth
Co-Autoren:
Hickmann Thorsten, Vinod-Kumar Banoth, Martin Engelke
Eisenhuth GmbH & Co. KG
P1-100Benefits of high-throughput concepts for battery research – accelerating battery materials developmentPhilip Minnmann
Co-Autoren:
Dr. Daniel Jalalpoor, Dr. Florian Huber
hte GmbH
P1-101Insights into Homogenous Bulk Boron Doping at the Tetrahedral Site of NCM811 Cathode Materials: Structure Stabilization by Inductive Effect on TM-O-B BondsBixian Ying
Co-Autoren:
Zhenjie Teng, Honghong Tian, Karin Kleiner
Münster Electrochemical Energy Technology
P1-102Upcycling discarded graphite into free-standing graphene oxide for prelithi-aionHonghong TianTechnical University of Darmstadt, Münster University
P1-103Increased Cycling Stability of a-SiCx Materials as an Anode for LIBMoritz Loewenich
Co-Autoren:
Hans Orthner, Hartmut Wiggers
Universtiy Duisburg-Essen
P1-104Advanced Characterization of Electrode Electrolyte Interface through Tip-Enhanced Raman SpectroscopyDr. Sirshendu DindaKarlsruhe Institute for Technology
P1-105Experimental setup for investigating hydrogen sulfide formation of sulfide-based separatorsTimon Scharmann
Co-Autoren:
Canel Özcelikman, Do Minh Nguyen, Carina Amata Heck, Christian Wacker, Peter Michalowski, Arno Kwade and Klaus Dröder
TU Braunschweig / Institut für Werkzeugmaschinen und Fertigungstechnik
P1-106A Novel Characterization Method for Blend Anode Materials in High-Energy Lithium-Ion BatteriesDr. -Ing Jiahao Li
Co-Autoren:
Julian Knorr, Michael A. Danzer
BMW AG
P1-108Novac Universal Current Collector: the ultimate composite to improve battery performancePh.D. Bruno Grandinetti
Co-Autoren:
Aldo Girimonte, Stefano Chiavegato, Alessandro Fabbri, Loris Bruzzi
Novac Srl
P1-109High-nickel Co-free Layered oxide cathode materialsLida Noroozi
Co-Autoren:
Dr. Johannes Kasnatscheew
University of Münster | MEET Battery Research Center
P1-110Linking Conductivity and Microstructure of Sulfide based Composite Cathodes for Solid State Sodium Ion BatteriesMsc Rana Ücüncüoglu
Co-Autoren:
Leticia Trezecik Silvano, Volker Knoblauch, Pinar Kaya
Aalen University of Applied Sciences
P1-111Synchrotron tomography for ex-situ characterization of carbon-polymer composite bipolar plates for vanadium redox flow batteriesM.Sc. Priyanka Sharma
Co-Autoren:
Abdurrahman Bilican, Wolfgang Schmidt, Lukas Kopietz, Claudia Weidenthaler
Max-Planck-Institut für Kohlenforschung
P1-112Mechanistic Insights and Data-Driven selection of electrolyte additives for aqueous Mg-air batteriesDr. Darya SnihirovaHelmholtz-Zentrum Hereon
P1-113(Perfluoroalkyl)fluorophosphate Ionic Liquids: Potential Building Blocks for Renewable Energy Storage SystemsDr. Tobias Preitschopf
Co-Autoren:
R. Graf, Y. K. J. Bejaoui, N. Schopper, T. Knuplez, L. Schneider, J. A. P. Sprenger, C. Bracht, N. V. Ignat`ev, M. Finze
Universität Würzburg
P1-114Carbon nanostructures (CNS) as next generation conductive additive for LIB electrodesDr. Alex Friesen
Co-Autoren:
Ron Hendriks
Cabot Battery Materials GmbH
P1-002


Filip Francqui
Co-Autoren:
Filip Francqui, Stéphane Caubergh, Marcella Horst
Granutools

Powder characterization: the first step for improving dry electrode manufacturing
P1-003


PhD Student Celina Dlofo
Swansea University

Manufacture of Na-ion solid-state electrolytes for batteries
P1-004


M. Sc. Finn Frankenberg
Co-Autoren:
Maximilian Kissel, Prof. Dr. Jürgen Janek, Prof. Dr.-Ing. Arno Kwade
Institut für Partikeltechnik

Influence of mixer stressing conditions on the microstructural properties and electrochemical performance of all-solid-state battery cathodes
P1-005


Dr. Marian Cristian Stan
Co-Autoren:
Gerrit Overhoff, Hyung-Tae Kim, Nick Fehlings, Martin Winter, Gunther Brunklaus and Isidora Cekic-Laskovic
Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung (IEK-12) Helmholtz-Institute Münster (HI MS)

Synergistic impact of electrolyte additives enhancing the high-voltage performance of LMR-NMC║μ-Si cell chemistry
P1-006


Master of Science in Chemistry Markus Binder
Co-Autoren:
Matthias Kuenzel, Rene Jakelski, Dominic Bresser
Karlsruher Institut für Technologie

Gelation Behavior of NMP-processed NMC811 Electrode Slurries During Exposure to Moisture and the Influence on the Electrode Performance
P1-007


PhD BENOIT CAMPEON
Co-Autoren:
Thomas Boulmier, Adeline Lafort, Sascha Nowak, Ivan Trentin, Nour Daher, Rémi Vincent, Alessandro Tengattini, Claire Testori, Xavier Randrama, Massimo De Pieri, Jan Hilhorst, Ainara Aguadero, Irune Villaluenga, Andere Basterretxea, Pedro Lopez, Sam Cooper, Peter Šiffalovič, Didier Devaux
CNRS LEPMI

Solid-state Li metal battery with hybrid electrolyte: An overview of the Horizon Europe SEATBELT project
P1-008


Dr. Kerstin Neuhaus
Co-Autoren:
J. Hopster, S. Krämer, M. Winter
Forschungszentrum Jülich GmbH

Proof of concept: Ti-doped zinc ferrite for application as cathode material in zinc ion batteries
P1-009


Dr. Lennart Singer
Universität Heidelberg

Lithium-rich Antiperovskites as cathode material for Li-ion batteries
P1-010


Master Kazuteru Umetsu
Asahi Kasei Europe GmbH

High performance LIC by new Lithium pre-doping using Li2CO3
P1-011


Robert Tobias Hinz
Forschungszentrum Juelich GmbH

High throughput experimental workflow for accelerated ionic conductivity determination of Na-based battery electrolytes
P1-012


Dr. Daniela Fenske
Co-Autoren:
Marcel Reisch, Julian Schwenzel
Fraunhofer-Institut for Manufacturing and Andvanced Materials IFAM

Herstellung, Benetzung und Performance TiC-basierter Gasdiffusionselektroden für Li-Sauerstoff Batterien
P1-013


Baharehalsadat (Bahareh A.) Sadeghi
Co-Autoren:
Christian Wölke, Mykhailo Shevchuk, Gerd-Volker Röschenthaler, Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich GmbH

Impacts of novel phosphorus-based additives in boosting NMC811||Si-graphite cell performance and safety
P1-015


Pascal Glomb
Co-Autoren:
Min-Huei Chiou, Gunther Brunklaus, Martin Winter
Forschungszentrum Juelich | Helmholtz-Institut Münster IEK-12

Green High Areal Capacity Composite Cathodes in All Solid-State Batteries – Alternative Cathode Processing
P1-016


PhD student Ivan LETEYI MFIBAN
Co-Autoren:
Irina PROFATILOVA, Victor VANPEENE, Vasily TARNOPOLSKIY, Magali REYTIER
Atomic Energy and Alternative Energies Commission (CEA)

A detailed study of humidity-induced degradation of pelletized Li3PS4 solid electrolyte using large-scale instruments
P1-017


Marvin Mohrhardt
Co-Autoren:
Martin Winter; Gunther Brunklaus
Forschungszentrum Jülich GmbH

Electrochemical Detection of Inactive Lithium Metal
P1-018


Steffen Oevermann
Co-Autoren:
Min-Huei Chiou, Martin Winter, Gunther Brunklaus
Forschungszentrum Jülich GmbH

Combinations of polymer-based cathode and electrolyte materials for quasi-solid organic radical batteries enabling high current density applications
P1-019


Magdalena Fiedler
Fraunhofer IWS

Mechanistic insights into the cycling behavior of sulfur dry-film cathodes for pouch cells
P1-020


Bärbel Tengen
Co-Autoren:
Martin Winter, Gunther Brunklaus
University of Münster

Impact of Electrospun Membranes on the Cell Performance of Lithium-Sulfur Batteries
P1-021


M.Sc. Katharina Platen
Co-Autoren:
Frederieke Langer, Julian Schwenzel
Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM

The path from manufacturing polymer-based solid-state battery components to testing of ASSBs full cells
P1-022


Joachim Hering
Co-Autoren:
Katja R. Kretschmer; Daniel Schröder
Technische Universität Braunschweig

Multifunctional additive mixture to reduce dendrite formation in zinc-ion batteries
P1-023


Anne Hockmann
Co-Autoren:
Diddo Diddens, Isidora Cekic-Laskovic, Monika Schönhoff
University of Münster

Towards understanding the structure and dynamics of localized high-concentration battery electrolytes
P1-024


Maike Leopold
Co-Autoren:
Christian Wölke, Martin Winter, Isidora Cekic-Laskovic
Forschungszentrum Jülich

Importance of fluorine for high voltage LNMO||SiGr cell chemistry
P1-025


Dominik Weintz
Co-Autoren:
Lukas Stolz, Martin Winter, Isidora Cekic-Laskovic, Johannes Kasnatscheew
Helmholtz-Institut Münster, FZ Jülich

Unraveling the Impact of the Electrolyte Volume on the Capacity Decay of Lithium-Metal Batteries
P1-026


Master of Science Annalena Krude
Co-Autoren:
Marvin Mohrhardt, Peter Lennartz, Martin Winter, Gunther Brunklaus
Forschungszentrum Jülich GmbH

Evaluation of Artificial Coatings for Polymer-based Lithium Metal Batteries
P1-027


MSc Leyla Ünal
Forschungszentrum Jülich

Prelithiated Carbon Nanotubes for Stabilizing Silicon-rich Silicon/Graphite Blend Anodes for High-Energy Density Li-Ion Batteries
P1-028


Julian Brokmann
Co-Autoren:
Matteo Kaminski, Lajos Groffmann, Nikolas Dilger, Sebastian Melzig, Sabrina Zellmer
Fraunhofer IST

Production of ultra thin lithium metal anodes for solid-state batteries using sputter deposition
P1-029


Dr. Franziska Jach
Co-Autoren:
Max Bamberg, Felix Fuhrmann, Martin Eckert, Gero Frisch, Ulrike Wunderwald
Fraunhofer IISB Erlangen

Aluminum-Graphite Batteries: Insights into Self-Discharge Processes
P1-031


Aleksei Sadykov
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center

Direct polysulfides quantification in the electrolytes of Li-S Batteries using HPLC-ICP-MS technique
P1-032


Sebastian Fricke
Helmholtz-Institut Münster

Molar Fluxes and Cell Constants in Redox-Flow Batteries – Unifying RFB Cell Setups and their Performance Results
P1-033


Maximilian Schamel
Co-Autoren:
Michael A. Danzer
Universität Bayreuth

Model-based prediction of the electrochemical performance of all-solid-state composite cathodes fabricated by powder aerosol deposition
P1-034


Feleke Berehane Demelash
Co-Autoren:
Anindityo (Tio) Arifiadia, Martin Winter, and Philip Niehoff
University of Münster

Fluoroethylene Carbonate Protection Enabled by Novel Additive Stabilizes High-voltage LIBs with SiOx-containing Negative Electrode
P1-035


Laura Henrich
Co-Autoren:
Egbert Figgemeier
Institut für Stromrichtertechnik und elektrische Antriebe

Pioneering Synthesis Routes Investigation for novel Cathode Material Compound Classes of Sodium Ion Batteries
P1-036


M.Sc. Lukas Köbbing
Co-Autoren:
Arnulf Latz, Birger Horstmann
German Aerospace Center (DLR) and Helmholtz Institute Ulm (HIU)

Understanding the Silicon Voltage Hysteresis by considering the impact of the Solid-Electrolyte Interphase (SEI)
P1-037


Peng Yan
Co-Autoren:
Marian Cristian Stan, Christian Wölke, Bahareh Sadeghi, Rayan Guerdelli, Martin Winter, and Isidora Cekic-Laskovic
Forschungszentrum Jülich

Mitigating Stainless Steel Dissolution in High-Performance Coin Cells with LiFSI-based Electrolytes
P1-038


Noah Schmidt-Meinzer
Co-Autoren:
Ingo Krossing
Freiburger Materialforschungszentrum

Synthesis and Electrochemical Characterization of Novel Electrolyte Additive for Lithium-Ion Batteries with Si-based Anodes
P1-039


M.Sc. Shikha Singh
RWTH Aachen University

Hierarchically Structured, Porous Carbon Materials for Organic Potassium-Oxygen Batteries
P1-041


Fritz Wortelkamp
Co-Autoren:
Christian Wittekind, Ingo Krossing
Universität Freiburg

Gathering Intelligence for Intelligent Liquid Elektrolyte Design in Lithium-Sulfur Batteries
P1-042


Felix Pfeiffer
Forschungszentrum Jülich GmbH

Characterization of Interphases formed by Ethylene Carbonate based Electrolyte Additives on High-Voltage Lithium-Ion Battery Electrodes via operando Advanced Raman Spectroscopy Techniques
P1-043


Silvan Stuckenberg
Co-Autoren:
Marlena M. Bela, Christian-Timo Lechtenfeld, Maximilian Mense, Verena Küpers, Tjark T. K. Ingber, Martin Winter, Marian C. Stan
University of Münster | MEET Battery Research Center

Lithium nitrate enriched separators as sacrifical additive in zero-excess lithium metal batteries with carbonate-based electrolytes
P1-044


Yulia Trenikhina
Co-Autoren:
Stephen Kelly, Benjamin Tordoff
Carl Zeiss X-ray Microscopy

Correlative Microscopy Analysis for Battery Materials
P1-045


Dr. Sven Porath
Co-Autoren:
Ingo Krossing
Cluster of Excellence livMatS, University of Freiburg

Blocking the Sulfur Shuttle: Synergy between Artificial SEI and Low-Polarity Solvent
P1-046


PhD Student Amogne Workie Yibeltal
Helmholtz Institute Ulm (HIU) for electrochemical energy storage, Karlsruhe Institute Technology(KIT)

DEVELOPMENT OF NMC622 / LATP COMPOSITE CATHODES FOR HYBRID SOLID STATE LITHIUM BATTERIES
P1-047


Jian Fen Wang
Jülich Forschungszentrum Helmholtz Institut Münster

Unveiling the Interphases of Solid-State Electrolytes via Operando ATR-FTIR Spectroscopy
P1-048


Elisabeth Glatt
Co-Autoren:
Martin Menzler, Sebastian Melzig, Sabrina Zellmer
Fraunhofer IST

Synthesis of layered oxide cathode active materials using recycled materials
P1-049


Friedrich Sven
Co-Autoren:
Vitaly Savvin
Technical University Munich

Experimental Analysis of External Short-Circuit Scenarios Applied to Lithium-Ion Cells with Silicon-Dominant Anodes under Different Mechanical Pressures
P1-050


Robin Moschner
Co-Autoren:
Peter Michalowski, Arno Kwade
TU Braunschweig

Sulfur-Polyacrylonitrile as an alternative sulfur active material and its processing
P1-051


Master Sanaz Banifarsi
Zentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW)

Dilation Investigation of Si-rich Anode Under External Mechanical Pressure
P1-053


Soutam Panja
Co-Autoren:
Yidong Miao, Johannes Döhn, Jaehoon Choi, Simon Fleischmann, Shivaraju Guddehalli Chandrappa, Thomas Diemant, Axel Groß, Guruprakash Karkera, Maximilian Fichtner
Helmholtz Institute Ulm (HIU)

Potassium Tin Chloride as a new electrode Material for Chloride-Ion Batteries
P1-054


PhD Peter Kalisvaart
Co-Autoren:
Akam Osmanpour, Vanesa Ruiz, Marco Spreafico, Axel Schonecker
E-magy

Correlating Silicon utilization, Initial Coulombic Efficiency and Cycle Life in Silicon-Dominant Anodes
P1-056


Marc Vahnstiege
Co-Autoren:
Alexandros Tsoufios, Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
Universität Münster

Quantification of the State-Of-Charge Heterogeneity of NMC Cathode Materials using SP-ICP-OES
P1-057


Kai Brüning
Co-Autoren:
Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
Universität Münster

Determination of the Silicon Content of Lithium Ion Battery Anodes by means of High-Resolution Continuum Source Atomic Absorption Spectroscopy
P1-058


Julia Meierl
Co-Autoren:
E. Jacob, H. Koger, N. Schmidt-Meinzer, I. Krossing
Universität Freiburg

Lithium-, Magnesium-, and Calcium- Salts as Electrolyte Additives for Si-based Anodes in LIBs
P1-059


M.Sc. Anindityo (Tio) Arifiadi
Co-Autoren:
Tobias Brakea, Christian Lechtenfelda, Stefan van Wickerena, Feleke Demelasha, Martin Wintera,b, Johannes Kasnatscheew
University of Münster | MEET Battery Research Center

Exploring the voltage stability limits of O3-type Li/Mn-rich layered oxide || graphite cells
P1-060


Johannes Wanner
Co-Autoren:
Matthias Burgard, Ricardo Kleinert, Nabih Othman, Julian Grimm, Kai Peter Birke
Fraunhofer IPA

Modelling the accelerated electrolyte wetting in battery cell manufacturing by process and product properties
P1-061


Johannes Wanner
Co-Autoren:
Matthias Burgard, Ricardo Kleinert, Nabih Othman, Julian Grimm, Kai Peter Birke
Fraunhofer Institute for Manufacturing Engineering and Automation IPA

Modelling the accelerated electrolyte wetting in battery cell manufacturing by process and product properties
P1-062


Niklas Abke
University of Münster | MEET Battery Research Center

What’s Cracking? Deep Investigation of aged Solid-State Electrolyte Lithium Sulfur Batteries via Time of Flight Secondary Ion Mass Spectrometry.
P1-063


Maximilian Kissel
Co-Autoren:
Thomas Demuth, Felix Walther, Jonas Hertle, Kerstin Volz, Jürgen Janek
Justus-Liebig-Universität Gießen

Tuning the artificial cathode electrolyte interphase formation as coating for cathode active materials in solid-state batteries
P1-064


Dr. Leticia Trezecik Silvano
Co-Autoren:
Volker Knoblauch, Pinar Kaya
Hochschule Aalen

Synthesis and Characterization of the Na3PS4 Solid Electrolyte for Sodium Solid State Batteries
P1-065


Frederik Püttmann
Co-Autoren:
Jana Soborka, Isabelle Hoffmann, Philip Niehoff, Markus Börner, Martin Winter
University of Münster | MEET Battery Research Center

The Influence of the Copper Current Collector Structure on the Electrochemical Performance and Cycle Life of Lithium Metal Batteries
P1-066


Doctor Hyung-Tae Kim
Co-Autoren:
Kirstin Darida, Gerrit Overhoff, Marian Cristian Stan, Martin Winter, Isidora Cekic-Laskovic
LG Energy Solution / Helmholtz-Institute Muenster

Novel phospholane additivesenhancing electrochemical performance of LMR-NMC || graphite cell chemistry
P1-067


Ayse Yarangünü
Co-Autoren:
Dr. rer. nat Maja W. Kandula
TU Braunschweig, Institut für Füge- und Schweißtechnik

Polymer Blends as novel Binder Systems for Li-Ion Batteries
P1-068


M.sc. Kriss-Kevin Kasten
Co-Autoren:
P. Michalowski, A. Kwade
Institut für Partikeltechnik, Technische Universität Braunschweig

Sodium ion Battery as next generation Battery Technology: Investigation of NMO as promising Cathode material and systematic study for its slurry preparation for manufacturing industrial production.
P1-069


M.Sc. Elias Reisacher
Co-Autoren:
Nikolaos Papadopoulos, Tim Schubert, Pinar Kaya, Volker Knoblauch
Hochschule Aalen

Microstructural Design of Sulfide-based Composite Cathodes for All-Solid-State Batteries
P1-070


M. Sc Jithin Antony
Co-Autoren:
W. Peters, J.F.Drillet
DECHEMA Forschungsinstitut

Development of a rechargeable jelly roll Zinc/Manganese battery
P1-071


Laurin Profanter
Co-Autoren:
Aleksei Kolesnikov, Anindityo Arifadi, Nick Fehlings, Ilha Lee, Martin Winter, Johannes Kasnatscheew
Universität Münster

Pre-Lithiation of Silicon Electrodes Using Physical Vapor Deposition
P1-072


Maximilian Straub
Co-Autoren:
Elias Reisacher, Pinar Kaya, Volker Knoblauch
Aalen University of applied sciences

Influence of the Densification Process on the Microstructure of Li6PS5Cl-Based Slurry-Cast Separators and Composite Cathodes for All-Solid-State Batteries
P1-073


Dr. Khrystyna Yezerska
Co-Autoren:
D. Fenske, J. Schwenzel
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung – IFAM

The manufacturing and advanced characterization of the porous Xerogel Gas Diffusion Electrodes (XGDEs) for Calcium-Air (Ca-Air) Batteries
P1-075


Arndt Strohschein
Co-Autoren:
Jannis Busch, Lenard Hanf, Marlena Bela, Sascha Nowak, Martin Winter, Simon Wiemers-Meyer
University of Münster | MEET Battery Research Center

Influence of Negative Electrode Coatings in All-Solid-State Lithium Metal Batteries on the Electrochemical Performance
P1-076


Dr. Akihiro Yamashita
Co-Autoren:
Hyunsang Joo, Benedikt Konersmann, Egbert Figgemeier
Forschungszentrum Jülich

Multi-fidelity Bayesian optimization of prelithiation process for lithium-ion batteries: Combining multi-scale experiments
P1-077


Dr.-Ing. Michael Hein
Co-Autoren:
Martin Sedlmair M.Sc., Christian Reumüller M.Sc., Dr.-Ing. Ansgar Damm, Dr. Robert Braun
HOERBIGER Antriebstechnik Holding GmbH

Prismatic cell housings for future automotive cell applications
P1-078


Dr.rer.nat. Helene Jeske
Co-Autoren:
Ayse Yarangünü, Maja Kandula, Klaus Dilger
TU Braunschweig, Insitute of Joining and Welding

PVDF/NMC622 cathode slurry preparation with an alternative organic solvent to replace NMP
P1-079


M. Sc. Alexander Grade
Co-Autoren:
Emmanuel Ezeoba, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Post-Mortem Analysis of an All-Solid-State Battery with a Hybrid Polymer and Ceramic Electrolyte
P1-080


Jingyu Xie
Co-Autoren:
Christina Roth, Karl-Heinz Pettinger
Technology Centre Energy, Landshut University of Applied Sciences

Manufacturing process of Si-based anodes using nature inspired polydopamine
P1-081


Susanna Krämer
Co-Autoren:
Diddo Diddens, Martin Winter and Mariano Grünebaum
Forschungszentrum Jülich GmbH

Influence of Modified Sugar Alcohols on the Electrochemical Stability Window in Aqueous Electrolytes
P1-082


M.Sc Charan Mukundan
Co-Autoren:
Jean-Francois Drillet
Dechema Forschungsinstitut

Improving the performance of an Al-Graphite cell with reduced electrolyte cost
P1-083


Heck Carina
Co-Autoren:
Timon Scharmann, Markus Osenberg, Alexander Diener, Ingo Manke, Peter Michalowski, Arno Kwade
TU Braunschweig - Institute for Particle Technology

Opportunities and Challenges of the Densification of Sulfide-Based Separators for Solid-State Batteries
P1-084


Lukas Schrief
Co-Autoren:
Lukas Hellweg, Iris Dienwiebel, Uta Rodehorst, Markus Börner, Martin Winter
University of Münster | MEET Battery Research Center

Influence of Silicon as Negative Electrode Active Material on the Safety of Lithium Ion Batteries: Thermal Investigations from Material to Cell Level
P1-086


Eike Jacob
Co-Autoren:
Ingo Krossing
University of Freiburg

Liquid Gas Chemistry for Calcium Metal Batteries
P1-087


Len Kimms
Co-Autoren:
Diddo Diddens, Andreas Heuer
Universität Münster

Coarse-Grained and Atomistic Simulation of Dendrite Growth in Lithium Metal Batteries
P1-088


M.Sc. Jan Petit
Co-Autoren:
Philipp Heugel, Franziska Klein, Jens Tübke
Fraunhofer Institute for Chemical Technology ICT

Investigation of the Influence of Silicon Oxide Content on Electrolyte Degradation, Gas Evolution, and Thickness Change in Silicon Oxide/Graphite Composite Anodes for Li-Ion Cells Using Operando Techniques
P1-089


Lara Kersting
Co-Autoren:
Rebekka Tien, Anna Gerlitz, Martin Winter, Markus Börner
University of Münster

Practical Evaluation of Different Electrode Designs with Silicon-based Active Materials - from pure Graphite to pure Silicon
P1-090


Dr. Ulrike Wunderwald
Co-Autoren:
Martin Eckert, Jacob Klink, Ngoc-Tram Nguyen, Franziska Jach, Frank Deblon, Gero Frisch, Ralf Benger, Ines Hauer
Fraunhofer IISB

Pouch cell design for aluminum-graphite batteries
P1-091


Doctor KUN-LING LIU
Co-Autoren:
Annalena Krude, Peter Lennartz, Marvin Mohrhardt, Niklas Abke, Sascha Nowak, Holger Althues, Stefan Kaskel, Martin Winter, and Gunther Brunklaus
Forschungszentrum Jülich

Quasi-Solid Single-Ion Conducting Block Copolymer for Li-Sulfur batteries
P1-092


M. Sc. Lars Oliver Schmidt
Co-Autoren:
Houssin Wehbe, Sven Hartwig, Maja W. Kandula
TU Braunschweig, Institut für Füge- und Schweißtechnik

Influence of Graphite-Silicon Anode Properties on the PVD Prelithiation Process
P1-093


Tobias König
Co-Autoren:
Peng Guo, Lennart Singer, Tom Wickenhäuser, Michael Zharnikov, Peter Comba, Rüdiger Klingeler
Kirchhoff-Institut für Physik, Universität Heidelberg

Mn-Doped V2C MXenes as Anode Materials for Li-Ion Batteries
P1-094


Ph.D. / Integrated Course Jihan Park
Co-Autoren:
Minjoon Park
Pusan National University

A Physical Approach to Practical Applications of Lithium Metal Anode Using High-Flatness Cu Mesh Inducing Epitaxial Li Plating
P1-095


bachelor Duho Han
Pusan National University

The recycling of used LMO cathode active material for high-voltage redox flow batteries
P1-096


Andreas Kopp
Co-Autoren:
Tim Schubert, Christiana Malchus, Timo Bernthaler, Gerhard Schneider
Hochschule Aalen

High-Resolution X-ray Microscopy (XRM) for the characterization of Li-Ion Batteries
P1-098


Lukas Herbers
Co-Autoren:
Jaroslav Minář, Silvan Stuckenberg, Verena Küpers, Debbie Berghus, Sascha Nowak, Martin Winter, Peter Bieker
University of Münster | MEET Battery Research Center

PEO Solid State Electrolytes - The Influence of Electrolyte Degradation on NMC622 ‖ Li metal cells
P1-099


Vinod-Kumar Banoth
Co-Autoren:
Hickmann Thorsten, Vinod-Kumar Banoth, Martin Engelke
Eisenhuth GmbH & Co. KG

Factors influencing the performance of copper compounds for zinc air flow battery application
P1-100


Philip Minnmann
Co-Autoren:
Dr. Daniel Jalalpoor, Dr. Florian Huber
hte GmbH

Benefits of high-throughput concepts for battery research – accelerating battery materials development
P1-101


Bixian Ying
Co-Autoren:
Zhenjie Teng, Honghong Tian, Karin Kleiner
Münster Electrochemical Energy Technology

Insights into Homogenous Bulk Boron Doping at the Tetrahedral Site of NCM811 Cathode Materials: Structure Stabilization by Inductive Effect on TM-O-B Bonds
P1-102


Honghong Tian
Technical University of Darmstadt, Münster University

Upcycling discarded graphite into free-standing graphene oxide for prelithi-aion
P1-103


Moritz Loewenich
Co-Autoren:
Hans Orthner, Hartmut Wiggers
Universtiy Duisburg-Essen

Increased Cycling Stability of a-SiCx Materials as an Anode for LIB
P1-104


Dr. Sirshendu Dinda
Karlsruhe Institute for Technology

Advanced Characterization of Electrode Electrolyte Interface through Tip-Enhanced Raman Spectroscopy
P1-105


Timon Scharmann
Co-Autoren:
Canel Özcelikman, Do Minh Nguyen, Carina Amata Heck, Christian Wacker, Peter Michalowski, Arno Kwade and Klaus Dröder
TU Braunschweig / Institut für Werkzeugmaschinen und Fertigungstechnik

Experimental setup for investigating hydrogen sulfide formation of sulfide-based separators
P1-106


Dr. -Ing Jiahao Li
Co-Autoren:
Julian Knorr, Michael A. Danzer
BMW AG

A Novel Characterization Method for Blend Anode Materials in High-Energy Lithium-Ion Batteries
P1-108


Ph.D. Bruno Grandinetti
Co-Autoren:
Aldo Girimonte, Stefano Chiavegato, Alessandro Fabbri, Loris Bruzzi
Novac Srl

Novac Universal Current Collector: the ultimate composite to improve battery performance
P1-109


Lida Noroozi
Co-Autoren:
Dr. Johannes Kasnatscheew
University of Münster | MEET Battery Research Center

High-nickel Co-free Layered oxide cathode materials
P1-110


Msc Rana Ücüncüoglu
Co-Autoren:
Leticia Trezecik Silvano, Volker Knoblauch, Pinar Kaya
Aalen University of Applied Sciences

Linking Conductivity and Microstructure of Sulfide based Composite Cathodes for Solid State Sodium Ion Batteries
P1-111


M.Sc. Priyanka Sharma
Co-Autoren:
Abdurrahman Bilican, Wolfgang Schmidt, Lukas Kopietz, Claudia Weidenthaler
Max-Planck-Institut für Kohlenforschung

Synchrotron tomography for ex-situ characterization of carbon-polymer composite bipolar plates for vanadium redox flow batteries
P1-112


Dr. Darya Snihirova
Helmholtz-Zentrum Hereon

Mechanistic Insights and Data-Driven selection of electrolyte additives for aqueous Mg-air batteries
P1-113


Dr. Tobias Preitschopf
Co-Autoren:
R. Graf, Y. K. J. Bejaoui, N. Schopper, T. Knuplez, L. Schneider, J. A. P. Sprenger, C. Bracht, N. V. Ignat`ev, M. Finze
Universität Würzburg

(Perfluoroalkyl)fluorophosphate Ionic Liquids: Potential Building Blocks for Renewable Energy Storage Systems
P1-114


Dr. Alex Friesen
Co-Autoren:
Ron Hendriks
Cabot Battery Materials GmbH

Carbon nanostructures (CNS) as next generation conductive additive for LIB electrodes

Postersession 2 „Cell Level – Any Technology“

P2-001AIM ™ Cell Technology: Fast and low-energy internal pre-heating of lithium-ion cells using electrodes with integrated resistance wiresPetros Selinis
Co-Autoren:
George Zardalidis, Filippos Farmakis, Ugo Lafont
Electrical and Computer Engineering Dept., Democritus University of Thrace, Greece
P2-002A direct comparison of a power and an energy-optimized Li-ion pouch cell: characterization, ageing and modellingDr. Preben J. S. Vie
Co-Autoren:
Julia Wind, John Ostrander, Paul Shearing
IFE - Institute for Energy Technology
P2-003Exploring the Microstructural Architecture of Commercial High-Energy 21700 Lithium-ion Batteries and its Influence on Cell Performance and AgingM.Sc. Christian Weisenberger
Co-Autoren:
S. Both, A. Lindner, E. Delz, T. Danner, W. Menesklou, T. Waldmann, A. Latz, M. Wohlfahrt-Mehrens, V. Knoblauch
Aalen University
P2-005Possibilites of Computer Tomography in Battery ResearchDr.-Ing. Christiane Rahe
Co-Autoren:
Dirk Uwe Sauer
RWTH Aachen University | ISEA
P2-006Comparison of dU/dQ, Voltage Decay and Float Currents via Temperature RampsDr. Meinert Lewerenz
Co-Autoren:
Mohamed Azzam, Moritz Ehrensberger, Christian Endisch, Dirk-Uwe Sauer
University of Applied Science Ingolstadt
P2-007Automatic Hybrid Parameter Identification Approach for Advanced Equivalent Circuit ModelsStephan Bihn
Co-Autoren:
Jonas Rinner, Florian Krause, Florian Ringbeck, Dirk Uwe Sauer
RWTH Aachen University
P2-008Distribution of relaxation times analyses of Li-ion batteries on different cell formatsChristian Plank
Co-Autoren:
Dorian Unbehauer, Leonard Jahn, Michael A. Danzer
Universität Bayreuth
P2-009Optimal Experimental Design for a Two-Stage Li-Ion Battery Aging StudyFlorian Ströbl
Co-Autoren:
Florian Schaeufl, Oliver Bohlen, Herbert Palm
Hochschule München
P2-010Lithium-ion battery cell formation: A com-bined differential voltage analysis (DVA) and modelling investigationFelix Schomburg
Co-Autoren:
Alexander Schmidt, Prof. Fridolin Röder
Universität Bayreuth
P2-011Calendar aging in high state-of-charge region: Open circuit versus constant voltageTimo RuewaldBatterieIngenieure GmbH
P2-012Apparent Ageing during Cyclic Ageing Tests of Compressed Li-ion BatteriesPablo Morales Torricos
Co-Autoren:
Meinert Lewerenz
Technische Hochschule Ingolstadt
P2-013Quantification of Li intercalation compounds and Li plating on graphite and Si/C composite anodes: Combination of high-resolution light microscopy under inert gas and ML-based phase analysisMarius Bolsinger
Co-Autoren:
Christian Weisenberger, Marc Kamlah, Volker Knoblauch
Hochschule Aalen - Institut für Materialforschung
P2-014Revealing Inhomogeneous Lithium Distribution via Diffuse Reflectance SpectroscopyMarcel Rogge
Co-Autoren:
Andreas Jossen
Technical University of Munich (TUM)
P2-015Rhombic Dodecahedral Lithium Plating Morphology in Commercial Full Cell BatteriesM.Sc. Heinrich Ditler
Co-Autoren:
Christiane Rahe, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P2-016Systematic inaccuracies in the electrical resistance measurement of joins for contactingHakon Gruhn
Co-Autoren:
Tobias Krueger, Malte Mund, Maja W. Kandula, Klaus Dilger
TU Braunschweig, Institut für Füge- und Schweißtechnik
P2-017Characterising Battery Modules Using Current-based Temperature GradientsDominik DroeseTU Berlin
P2-018Insights into the detection of gas emissions from lithium ion batteries using mass spectrometryPhD Abdelaziz Abdellatif
Co-Autoren:
Max Feinauer, Peter Sichler, Margret Wohlfahrt-Mehrens, Thomas Waldmann
ZSW
P2-019Characterisation of the aluminium-graphite battery for comparison with established cell technologiesM. Sc. Jacob Klink
Co-Autoren:
Ralf Benger, Ines Hauer, Martin Eckert, Franziska Jach, Ulrike Wunderwald
Technische Universität Clausthal
P2-020Thermal runaway analysis of lithium-ion batteries and electrode materials with regard to electrolyte additivesKarsten Geuder
Co-Autoren:
Hans Seifert, Carlos Ziebert
Karlsruher Institut für Technologie
P2-021Calorimetric investigation of heatflow of NMC Li-Ion Batteries with focus on agingM.Sc. Jan Neunzling
Co-Autoren:
Philipp Hainke; Kevin Böhm; David Henriques; Matthias Fleckenstein; Torsten Markus
BorgWarner AKASOL
P2-022Determination of solid-phase diffusion and reaction-rate coefficients for Li-ion batteriesM.Sc. Haider Adel Ali Ali
Co-Autoren:
Luc H.J. Raijmakers, Kudakwashe Chayambuka, Dmitri L. Danilov, Hermann Tempel ,Peter H.L. Notten, Rüdiger-A. Eichel
Forschungszentrum Jülich
P2-023Enhancing Lithium-Ion Battery Transport Safety: Mitigating Thermal Runaway Risks with Low-Temperature CoolingNils BöttcherBundesanstalt für Materialforschung und -prüfung
P2-024Exploring the effects of early-life overstress on the long-term degradation of lithium-ion cellsRobert Leonhardt
Co-Autoren:
Tim Tichter, Philippa Scharpmann, Anita Schmidt, Julia Kowal, Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung (BAM)
P2-025Simulative Investigation of Crucial Effective Transport Parameters of Li-Ion Cells based on Experimental Impedance SpectroscopyRaphael Mühlpfort
Co-Autoren:
Leonie Pfeifer, Anne Heß, Thomas Wetzel, Philipp Seegert
Karlsruher Institute of Technology (KIT)
P2-027Investigation of Self-Discharge and Calendar Aging of Li-Ion and Na-Ion CellsLuiza Streck
Co-Autoren:
Thomas Roth, Peter Keil, Andreas Jossen
Technical University of Munich (TUM)
P2-028Effects of mechanical pressure on the components of pouch-cells and their performanceMerit HoldorfTU Braunschweig | elenia - Institute for High Voltage Technology and Energy Systems
P2-029Comparative Evaluation of Thermal Runaway Behavior and Safety of Sodium-ion and Lithium-ion Cells during VentingYaroslava Fedoryshyna
Co-Autoren:
Stefan Schaeffler, Jonas Soellner, Elisabeth Gillich, Andreas Jossen
Technical University of Munich, Chair for Electrical Energy Storage Technology
P2-030Revolutionizing Monitoring: Hacking Prismatic Cells via External Fiber Bragg Grating SensorsM. Sc. André Hebenbrock
Co-Autoren:
Nury Orazov, Ralf Benger, Wolfgang Schade, Ines Hauer and Thomas Turek
Technische Universität Clausthal
P2-031ETV-ICP-OES as a versatile technique for the elemental analysis of lithium ion batteriesDennis Kessen
Co-Autoren:
Matthias Walter, Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
University of Münster | MEET Battery Research Center
P2-032An Optimization-based technique for modeling lithium-ion batteriesSeyed Saeed MadaniKIT
P2-033Analysis of cooling systems for cell-to-pack battery architectures using gapfiller materialsAdrian HerrmannPEM RWTH Aachen
P2-035Fast time domain impedance measurement methodDr. Nina KevlishviliFraunhofer ISE
P2-036Chronoamperometry as an analysis method for input testsB. Eng. Cedric JackmannTU Braunschweig
P2-037PyBOP: A Python Framework for Battery Model Optimisation and ParameterisationPhD Brady Planden
Co-Autoren:
Nicola Courtier, David Howey
University of Oxford
P2-038Effect of pressure during formation on the cyclic aging at 20 °C and 60 °C of NMC811 based LIB pouch cells in vinylene carbonate-containing and -free electrolytesKai Büscher
Co-Autoren:
B. Heidrich, M. Winter, P. Niehoff
University of Münster | MEET Battery Research Center
P2-039Simulative investigation of the tab design elements on the electrode and cell level with respect to their influence on the cell performance.M.Sc. Laurenz Bäsecke
Co-Autoren:
Jannik Jasper, Anna Weichert, Jonas Henschel, Saskia Wessel
Fraunhofer FFB
P2-040Simulation of electrochemical and mechanical interactions in graphite-silicon blend electrodes with an extended Newman-type modelSimon Schwab
Co-Autoren:
David Schmider, Wolfgang G. Bessler
Offenburg University of Applied Sciences
P2-041Nondestructive Parameterisation of Electrochemical Models for Lithium-Ion Batteries Using ML and EISAnton Schlösser
Co-Autoren:
J. Kowal
Technische Universität Berlin
P2-043An improved pulse-fitting method for equivalent circuit model parametrization of lithium-ion batteriesM.Sc. Minh-Dat David Vu
Co-Autoren:
Dr. Nina Kevlishvili, Maximilian Bruch
Fraunhofer Institute for Solar Energy Systems ISE
P2-044Modelling the impact of concentration gradients on the electrical behavior of lithium-ion batteries in ECMsM. Sc. Jonas Rinner
Co-Autoren:
Stephan Bihn, Dirk Uwe Sauer
CARL RWTH Aachen University
P2-045Exploring the Low-Temperature Threshold for Reactions in Commercial Lithium-Ion CellsDr. rer. nat. Tim Tichter
Co-Autoren:
Nils Böttcher; Anita Schmidt; Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung
P2-046Impact of mechanical preload on the performance and reversible swelling behavior of NMC811/graphite lithium-ion pouch cellsTom SchabenbergerTechnische Universität München
P2-047Investigation of the Influence of State of Charge Distribution on the Thermal PropagationMichael Theiler
Co-Autoren:
Alexander Baumann, Christian Endisch
Technische Hochschule Ingolstadt
P2-048Non-destructive defect analysis of fully assembled lithium ion bat-teries utilizing bench-top computer tomographyPatrick Harte
Co-Autoren:
Jonas Henschel, Yannick Philipp Stenzel, Martin Winter
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P2-049Electrical Characterisation and Cyclic Ageing of a Commercial 18650 Sodium-Ion CellMartin Otto
Co-Autoren:
Maximilian Mönikes, Dominik Droese, Julia Kowal
Technische Universität Berlin
P2-050An Iterative Technique for Measuring Battery Power CapabilityJunran ChenMcMaster Automotive Resource Centre (MARC)
P2-051Enabling Accurate and Robust Hysteresis Modeling for LiFePO_4 Batteries with Machine LearningMaster of Engineering Lisen Yan
Co-Autoren:
Lisen Yan
RWTH Aachen University | ISEA
P2-052Condition monitoring of a series connection of lithium-ion cells using impedance measurement methodsTorben Meibeck
Co-Autoren:
Martin Kiel
Fachhochschule Dortmund
P2-053Quantitative Analysis of Anode and Cathode Ageing in Batteries Using Impedance SpectraElif CandanRWTH Aachen University | ISEA
P2-054Influence and Correlation of different Stress Factors on the Cyclic Aging of NMC622/Graphite Lithium-Ion-BatteriesM. Sc. Emmanuel Ezeoba
Co-Autoren:
Alexander Grade
RWTH Aachen University | ISEA
P2-055Elucidating the electrode stability by means of acoustic emissions of commonly used electrodes for lithium-ion batteriesLukas Noll
Co-Autoren:
Daniel Schröder
Technische Universität Braunschweig - Institute of Energy and Process Systems Engineering
P2-056Electrochemical Modeling of Gr/Si Lithium-Ion Batteries with prolonged Relaxation Times considering Kinetic, Mechanical, and Geometric Cell CharacteristicsMaster of Science Papadopoulos Nikolaos
Co-Autoren:
Nicolas Koellner, Oliver Queisser, Dominik Geringer, Simon Schwunk, Volker Presser
Dr. Ing. h.c. F. Porsche AG
P2-057Influence of Temperature Gradients on the Thermal Runaway of Lithium-ion CellsStefan Schäffler
Co-Autoren:
Andreas Jossen
Technical University of Munich (TUM)
P2-058Comparative analysis of degradation mechanisms in 18650 cells with SiOx-graphite and graphite anodes during fast-charging using dynamic electrochemical impedance spectroscopyAndrea Kinberger
Co-Autoren:
Michael Danzer
Universität Bayreuth
P2-059Lifetime Prediction of Li-ion Cells: Characterization and Modelling of the Solid Electrolyte Interphase (SEI)Franziska AllgayerMercedes-Benz AG
P2-060X-ray diffraction for battery analysis: Modern challenges and modern solutionsDr. Marius Kremer
Co-Autoren:
Andrew Jones, Benedikt Schrode, Praveen Vir
Anton Paar GmbH
P2-061Dynamic Modeling of Zinc-Air Batteries Based on Time Domain AnalysisJiaqi YaoTechnische Universität Berlin
P2-062How many cells do we need to test? A statistical analysis of thermal stability testsM.Sc. Daniel Stiller
Co-Autoren:
Mechthild Lübke, Arno Kwade
PowerCo SE
P2-063Development and validation of a simplified quantification model for thermal propagation of prismatic cell-to-pack cellsM.Sc. Jan-Darius Plöpst
Co-Autoren:
Saskia Wessel, Jannik Jasper, Jonas Henschel, Simon Lux
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P2-064Spatial Analysis of Lithium-Ion Pouch Cell Degradation Using Eddy-Current SensorsFelix Brauchle
Co-Autoren:
Dr. Florian Grimsmann, Prof. Dr. Kai-Peter Birke
Mercedes-Benz AG
P2-065Scanning Acoustic Microscopy-based Battery AnalysisM. Sc. Nicolas Wilhelm
Co-Autoren:
Moritz Kroll
Fraunhofer Institute for Solar Energy Systems ISE
P2-066Advancing Battery Research through Computer Vision: A Deep Learning ApproachThorsten Tegetmeyer-Kleine
Co-Autoren:
Dirk Uwe Sauer, Weihan Li
RWTH Aachen University | ISEA
P2-067Combining WAXS, EIS, and Ultrasound Measurements to Enhance Battery Cell Understanding and Optimal DesignTim Falkenstein
Co-Autoren:
D. Wasylowski, M. Sonnet, C. Renais B. Mercier-Guyon M. Servajon, D. U. Sauer, S. Lyonnard C. Villevieille
RWTH Aachen | Institute for Power Electronics and Electrical Drives
P2-069The Validity of Electrochemical Impedance Spectroscopy of Lithium-Ion Batteries under the Effect of DC CurrentM.Sc. Daniel Lederer
Co-Autoren:
Fabian Zillken, Christopher Wett, Bugra Turan, Simon Schwunk, Michael Danzer
Dr. Ing. h.c. F. Porsche AG
P2-070Defective lithium ion batteries and their safety risks investigated using LA-ICP-MSM.Sc. Tobias Brake
Co-Autoren:
Martin Winter,Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center
P2-071Electrode Curvature in Li-ion CellsRobin Schäfer
Co-Autoren:
Estefane Barbosa Sá, Michael Kasper, Volker Knoblauch, Margret Wohlfahrt-Mehrens, Thomas Waldmann
ZSW Ulm
P2-072Direct Solid Analysis of Electrode Materials in the Field of Lithium Ion Batteries via Glow Discharge-Sector Field-Mass SpectrometryMSc Stephen Dorn
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center
P2-073Influence of different liquid electrolytes on the performance and stability of batteries with lithium metal anodesLeonie Pfeifer
Co-Autoren:
Raphael Mühlpfort, Anne Heß, Thomas Wetzel, Philipp Seegert
Karlsruher Institut für Technologie
P2-074Summary of an Extensive Multi-Method Characterization of a Commercial 1.2 Ah 18650 Sodium-Ion Battery CellMoritz SchütteRWTH Aachen University | ISEA
P2-075Fundamental physical constant fitting via temperature dependent non-linear impedance spectroscopySenior Undergraduate (Submitting on behalf of Assoc. Prof. Burak Ülgüt) Fazlı Eren Civan
Co-Autoren:
Burak Ülgüt
Bilkent University, Ankara/Türkiye
P2-076Differential voltage analysis for aging investigation of lithium ion cellsFariba KarimiPowerCo SE
P2-077Electrochemical Impedance Spectroscopy (EIS) and Non-Linear Harmonic Analysis (NHA) of Li/SOCl2/SO2Cl2 BatteriesPh.D. Candidate/Research Assistant Gökberk Katırcı
Co-Autoren:
Fazlı Eren Civan, Sunghoon jung, Chae Bong Lee, Burak Ülgüt
Bilkent University
P2-079Laser structuring of electrodes for improved Li-Ion battery performancePhD Aurélien Sikora
Co-Autoren:
Laura Gemini, Marc Faucon, Girolamo Mincuzzi
ALPhANOV
P2-080Flexibility in battery cell design for innovations and scale-up within the battery industryM. Sc. Jannik Jasper
Co-Autoren:
Jonas Henschel, Simon Lux
Fraunhofer FFB
P2-081Fast electrochemical tests for validation of production line Lithium ion battery electrodesKatrin Junghans
Co-Autoren:
Martin Winter, Markus Börner, Philip Niehoff
University of Münster | MEET Battery Research Center
P2-082Progression of lithium-ion cell format and its latest development in China marketLuke Hu
Co-Autoren:
Richard Cai
Electroder
P2-083Analysis of cooling systems for cell-to-pack battery architectures using gapfiller materialsAdrian HerrmannPEM RWTH Aachen
P2-084Influence of simplifications in lithium-ion battery ageing studies: Experimental investigation of pauses and interruptions in constant-current cycles and their influence on the rainflow-algorithmIvo HorstkötterTU Dresden
P2-085Analysis of Commercial Sodium-ion Battery Cells and Comparison with Lithium-ion Battery CellsKatharina Bischof
Co-Autoren:
Vittorio Marangon, Michael Kasper, Aislim Aracil Regalado, Margret Wohlfahrt-Mehrens, Markus Hölzle, Dominic Bresser, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg
P2-086Non-destructive electrode potential and open-circuit voltage aging estimation for lithium-ion batteriesM.Sc. Cedric Kirst
Co-Autoren:
Alexander Karger, Jan P. Singer, Andreas Jossen
TWAICE Technologies GmbH
P2-087Benefits and challenges of the laser structuring of nickel-rich cathodes for lithium-ion batteriesMaster of Science Alessandro Innocenti
Co-Autoren:
V. Scheck, R.-G. Scurtu, A. Hoffmann, P. Axmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg
P2-088Procedure of designing a propagation-safe thermal management system for second-life battery storage considering characteristic aging effectsBastian Klinke
Co-Autoren:
Finn van Ginneken, Stefan Essmann, Jürgen Köhler
Physikalisch-Technische Bundesanstalt
P2-089Recent advances of laser structured electrodes for high power cylindrical LFP battery cellsYannic Sterzl
Co-Autoren:
Martin Pulst, Shizhou Xiao, Wilhelm Pfleging
Karlsruher Institut für Technologie
P2-090Elevating battery technology through ultrafast laser processingViktoria Falkowski
Co-Autoren:
Carolyn Reinhold, Niclas Straßburger, Wilhelm Pfleging
Karlsruher Institut für Technologie
P2-091Surface and Subsurface Characterization of Lithium-Ion Battery Materials Using FIB-SEM with Integrated ToF-SIMS and 3D ToF-SIMS TomographyTomáš Šamořil
Co-Autoren:
Jiří Dluhoš, Jiří Honč, Tan Sui, Xuhui Yao
TESCAN GROUP
P2-092Laser Structured Anodes: A Journey from Coin Cells to 21700-type Cylindrical CellsM. Sc. Vanessa Scheck
Co-Autoren:
Alessandro Innocenti, Rares-George Scurtu, Margret Wohlfahrt-Mehrens, Peter Axmann and Markus Hölzle
ZSW – Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg
P2-093µ-Computer tomography of cathode materials for all solid-state Na metal batteries with Na-β″-alumina electrolyteBerik Uzakbaiuly
Co-Autoren:
G. Cha, A. Borchers, S. Pechman, S. Christiansen
Fraunhofer IKTS
P2-094In situ charging / discharging Analysis system for LIBsYoshikazu SasakiJEOL Ltd.
P2-001


Petros Selinis
Co-Autoren:
George Zardalidis, Filippos Farmakis, Ugo Lafont
Electrical and Computer Engineering Dept., Democritus University of Thrace, Greece

AIM ™ Cell Technology: Fast and low-energy internal pre-heating of lithium-ion cells using electrodes with integrated resistance wires
P2-002


Dr. Preben J. S. Vie
Co-Autoren:
Julia Wind, John Ostrander, Paul Shearing
IFE - Institute for Energy Technology

A direct comparison of a power and an energy-optimized Li-ion pouch cell: characterization, ageing and modelling
P2-003


M.Sc. Christian Weisenberger
Co-Autoren:
S. Both, A. Lindner, E. Delz, T. Danner, W. Menesklou, T. Waldmann, A. Latz, M. Wohlfahrt-Mehrens, V. Knoblauch
Aalen University

Exploring the Microstructural Architecture of Commercial High-Energy 21700 Lithium-ion Batteries and its Influence on Cell Performance and Aging
P2-005


Dr.-Ing. Christiane Rahe
Co-Autoren:
Dirk Uwe Sauer
RWTH Aachen University | ISEA

Possibilites of Computer Tomography in Battery Research
P2-007


Stephan Bihn
Co-Autoren:
Jonas Rinner, Florian Krause, Florian Ringbeck, Dirk Uwe Sauer
RWTH Aachen University

Automatic Hybrid Parameter Identification Approach for Advanced Equivalent Circuit Models
P2-008


Christian Plank
Co-Autoren:
Dorian Unbehauer, Leonard Jahn, Michael A. Danzer
Universität Bayreuth

Distribution of relaxation times analyses of Li-ion batteries on different cell formats
P2-009


Florian Ströbl
Co-Autoren:
Florian Schaeufl, Oliver Bohlen, Herbert Palm
Hochschule München

Optimal Experimental Design for a Two-Stage Li-Ion Battery Aging Study
P2-010


Felix Schomburg
Co-Autoren:
Alexander Schmidt, Prof. Fridolin Röder
Universität Bayreuth

Lithium-ion battery cell formation: A com-bined differential voltage analysis (DVA) and modelling investigation
P2-011


Timo Ruewald
BatterieIngenieure GmbH

Calendar aging in high state-of-charge region: Open circuit versus constant voltage
P2-012


Pablo Morales Torricos
Co-Autoren:
Meinert Lewerenz
Technische Hochschule Ingolstadt

Apparent Ageing during Cyclic Ageing Tests of Compressed Li-ion Batteries
P2-013


Marius Bolsinger
Co-Autoren:
Christian Weisenberger, Marc Kamlah, Volker Knoblauch
Hochschule Aalen - Institut für Materialforschung

Quantification of Li intercalation compounds and Li plating on graphite and Si/C composite anodes: Combination of high-resolution light microscopy under inert gas and ML-based phase analysis
P2-014


Marcel Rogge
Co-Autoren:
Andreas Jossen
Technical University of Munich (TUM)

Revealing Inhomogeneous Lithium Distribution via Diffuse Reflectance Spectroscopy
P2-015


M.Sc. Heinrich Ditler
Co-Autoren:
Christiane Rahe, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Rhombic Dodecahedral Lithium Plating Morphology in Commercial Full Cell Batteries
P2-016


Hakon Gruhn
Co-Autoren:
Tobias Krueger, Malte Mund, Maja W. Kandula, Klaus Dilger
TU Braunschweig, Institut für Füge- und Schweißtechnik

Systematic inaccuracies in the electrical resistance measurement of joins for contacting
P2-017


Dominik Droese
TU Berlin

Characterising Battery Modules Using Current-based Temperature Gradients
P2-018


PhD Abdelaziz Abdellatif
Co-Autoren:
Max Feinauer, Peter Sichler, Margret Wohlfahrt-Mehrens, Thomas Waldmann
ZSW

Insights into the detection of gas emissions from lithium ion batteries using mass spectrometry
P2-019


M. Sc. Jacob Klink
Co-Autoren:
Ralf Benger, Ines Hauer, Martin Eckert, Franziska Jach, Ulrike Wunderwald
Technische Universität Clausthal

Characterisation of the aluminium-graphite battery for comparison with established cell technologies
P2-020


Karsten Geuder
Co-Autoren:
Hans Seifert, Carlos Ziebert
Karlsruher Institut für Technologie

Thermal runaway analysis of lithium-ion batteries and electrode materials with regard to electrolyte additives
P2-021


M.Sc. Jan Neunzling
Co-Autoren:
Philipp Hainke; Kevin Böhm; David Henriques; Matthias Fleckenstein; Torsten Markus
BorgWarner AKASOL

Calorimetric investigation of heatflow of NMC Li-Ion Batteries with focus on aging
P2-022


M.Sc. Haider Adel Ali Ali
Co-Autoren:
Luc H.J. Raijmakers, Kudakwashe Chayambuka, Dmitri L. Danilov, Hermann Tempel ,Peter H.L. Notten, Rüdiger-A. Eichel
Forschungszentrum Jülich

Determination of solid-phase diffusion and reaction-rate coefficients for Li-ion batteries
P2-023


Nils Böttcher
Bundesanstalt für Materialforschung und -prüfung

Enhancing Lithium-Ion Battery Transport Safety: Mitigating Thermal Runaway Risks with Low-Temperature Cooling
P2-024


Robert Leonhardt
Co-Autoren:
Tim Tichter, Philippa Scharpmann, Anita Schmidt, Julia Kowal, Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung (BAM)

Exploring the effects of early-life overstress on the long-term degradation of lithium-ion cells
P2-025


Raphael Mühlpfort
Co-Autoren:
Leonie Pfeifer, Anne Heß, Thomas Wetzel, Philipp Seegert
Karlsruher Institute of Technology (KIT)

Simulative Investigation of Crucial Effective Transport Parameters of Li-Ion Cells based on Experimental Impedance Spectroscopy
P2-027


Luiza Streck
Co-Autoren:
Thomas Roth, Peter Keil, Andreas Jossen
Technical University of Munich (TUM)

Investigation of Self-Discharge and Calendar Aging of Li-Ion and Na-Ion Cells
P2-028


Merit Holdorf
TU Braunschweig | elenia - Institute for High Voltage Technology and Energy Systems

Effects of mechanical pressure on the components of pouch-cells and their performance
P2-029


Yaroslava Fedoryshyna
Co-Autoren:
Stefan Schaeffler, Jonas Soellner, Elisabeth Gillich, Andreas Jossen
Technical University of Munich, Chair for Electrical Energy Storage Technology

Comparative Evaluation of Thermal Runaway Behavior and Safety of Sodium-ion and Lithium-ion Cells during Venting
P2-030


M. Sc. André Hebenbrock
Co-Autoren:
Nury Orazov, Ralf Benger, Wolfgang Schade, Ines Hauer and Thomas Turek
Technische Universität Clausthal

Revolutionizing Monitoring: Hacking Prismatic Cells via External Fiber Bragg Grating Sensors
P2-031


Dennis Kessen
Co-Autoren:
Matthias Walter, Martin Winter, Sascha Nowak, Simon Wiemers-Meyer
University of Münster | MEET Battery Research Center

ETV-ICP-OES as a versatile technique for the elemental analysis of lithium ion batteries
P2-032


Seyed Saeed Madani
KIT

An Optimization-based technique for modeling lithium-ion batteries
P2-033


Adrian Herrmann
PEM RWTH Aachen

Analysis of cooling systems for cell-to-pack battery architectures using gapfiller materials
P2-035


Dr. Nina Kevlishvili
Fraunhofer ISE

Fast time domain impedance measurement method
P2-036


B. Eng. Cedric Jackmann
TU Braunschweig

Chronoamperometry as an analysis method for input tests
P2-037


PhD Brady Planden
Co-Autoren:
Nicola Courtier, David Howey
University of Oxford

PyBOP: A Python Framework for Battery Model Optimisation and Parameterisation
P2-038


Kai Büscher
Co-Autoren:
B. Heidrich, M. Winter, P. Niehoff
University of Münster | MEET Battery Research Center

Effect of pressure during formation on the cyclic aging at 20 °C and 60 °C of NMC811 based LIB pouch cells in vinylene carbonate-containing and -free electrolytes
P2-039


M.Sc. Laurenz Bäsecke
Co-Autoren:
Jannik Jasper, Anna Weichert, Jonas Henschel, Saskia Wessel
Fraunhofer FFB

Simulative investigation of the tab design elements on the electrode and cell level with respect to their influence on the cell performance.
P2-040


Simon Schwab
Co-Autoren:
David Schmider, Wolfgang G. Bessler
Offenburg University of Applied Sciences

Simulation of electrochemical and mechanical interactions in graphite-silicon blend electrodes with an extended Newman-type model
P2-041


Anton Schlösser
Co-Autoren:
J. Kowal
Technische Universität Berlin

Nondestructive Parameterisation of Electrochemical Models for Lithium-Ion Batteries Using ML and EIS
P2-043


M.Sc. Minh-Dat David Vu
Co-Autoren:
Dr. Nina Kevlishvili, Maximilian Bruch
Fraunhofer Institute for Solar Energy Systems ISE

An improved pulse-fitting method for equivalent circuit model parametrization of lithium-ion batteries
P2-044


M. Sc. Jonas Rinner
Co-Autoren:
Stephan Bihn, Dirk Uwe Sauer
CARL RWTH Aachen University

Modelling the impact of concentration gradients on the electrical behavior of lithium-ion batteries in ECMs
P2-045


Dr. rer. nat. Tim Tichter
Co-Autoren:
Nils Böttcher; Anita Schmidt; Jonas Krug von Nidda
Bundesanstalt für Materialforschung und -prüfung

Exploring the Low-Temperature Threshold for Reactions in Commercial Lithium-Ion Cells
P2-046


Tom Schabenberger
Technische Universität München

Impact of mechanical preload on the performance and reversible swelling behavior of NMC811/graphite lithium-ion pouch cells
P2-047


Michael Theiler
Co-Autoren:
Alexander Baumann, Christian Endisch
Technische Hochschule Ingolstadt

Investigation of the Influence of State of Charge Distribution on the Thermal Propagation
P2-048


Patrick Harte
Co-Autoren:
Jonas Henschel, Yannick Philipp Stenzel, Martin Winter
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Non-destructive defect analysis of fully assembled lithium ion bat-teries utilizing bench-top computer tomography
P2-049


Martin Otto
Co-Autoren:
Maximilian Mönikes, Dominik Droese, Julia Kowal
Technische Universität Berlin

Electrical Characterisation and Cyclic Ageing of a Commercial 18650 Sodium-Ion Cell
P2-050


Junran Chen
McMaster Automotive Resource Centre (MARC)

An Iterative Technique for Measuring Battery Power Capability
P2-051


Master of Engineering Lisen Yan
Co-Autoren:
Lisen Yan
RWTH Aachen University | ISEA

Enabling Accurate and Robust Hysteresis Modeling for LiFePO_4 Batteries with Machine Learning
P2-052


Torben Meibeck
Co-Autoren:
Martin Kiel
Fachhochschule Dortmund

Condition monitoring of a series connection of lithium-ion cells using impedance measurement methods
P2-053


Elif Candan
RWTH Aachen University | ISEA

Quantitative Analysis of Anode and Cathode Ageing in Batteries Using Impedance Spectra
P2-054


M. Sc. Emmanuel Ezeoba
Co-Autoren:
Alexander Grade
RWTH Aachen University | ISEA

Influence and Correlation of different Stress Factors on the Cyclic Aging of NMC622/Graphite Lithium-Ion-Batteries
P2-055


Lukas Noll
Co-Autoren:
Daniel Schröder
Technische Universität Braunschweig - Institute of Energy and Process Systems Engineering

Elucidating the electrode stability by means of acoustic emissions of commonly used electrodes for lithium-ion batteries
P2-056


Master of Science Papadopoulos Nikolaos
Co-Autoren:
Nicolas Koellner, Oliver Queisser, Dominik Geringer, Simon Schwunk, Volker Presser
Dr. Ing. h.c. F. Porsche AG

Electrochemical Modeling of Gr/Si Lithium-Ion Batteries with prolonged Relaxation Times considering Kinetic, Mechanical, and Geometric Cell Characteristics
P2-057


Stefan Schäffler
Co-Autoren:
Andreas Jossen
Technical University of Munich (TUM)

Influence of Temperature Gradients on the Thermal Runaway of Lithium-ion Cells
P2-058


Andrea Kinberger
Co-Autoren:
Michael Danzer
Universität Bayreuth

Comparative analysis of degradation mechanisms in 18650 cells with SiOx-graphite and graphite anodes during fast-charging using dynamic electrochemical impedance spectroscopy
P2-059


Franziska Allgayer
Mercedes-Benz AG

Lifetime Prediction of Li-ion Cells: Characterization and Modelling of the Solid Electrolyte Interphase (SEI)
P2-060


Dr. Marius Kremer
Co-Autoren:
Andrew Jones, Benedikt Schrode, Praveen Vir
Anton Paar GmbH

X-ray diffraction for battery analysis: Modern challenges and modern solutions
P2-061


Jiaqi Yao
Technische Universität Berlin

Dynamic Modeling of Zinc-Air Batteries Based on Time Domain Analysis
P2-062


M.Sc. Daniel Stiller
Co-Autoren:
Mechthild Lübke, Arno Kwade
PowerCo SE

How many cells do we need to test? A statistical analysis of thermal stability tests
P2-063


M.Sc. Jan-Darius Plöpst
Co-Autoren:
Saskia Wessel, Jannik Jasper, Jonas Henschel, Simon Lux
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Development and validation of a simplified quantification model for thermal propagation of prismatic cell-to-pack cells
P2-064


Felix Brauchle
Co-Autoren:
Dr. Florian Grimsmann, Prof. Dr. Kai-Peter Birke
Mercedes-Benz AG

Spatial Analysis of Lithium-Ion Pouch Cell Degradation Using Eddy-Current Sensors
P2-065


M. Sc. Nicolas Wilhelm
Co-Autoren:
Moritz Kroll
Fraunhofer Institute for Solar Energy Systems ISE

Scanning Acoustic Microscopy-based Battery Analysis
P2-066


Thorsten Tegetmeyer-Kleine
Co-Autoren:
Dirk Uwe Sauer, Weihan Li
RWTH Aachen University | ISEA

Advancing Battery Research through Computer Vision: A Deep Learning Approach
P2-067


Tim Falkenstein
Co-Autoren:
D. Wasylowski, M. Sonnet, C. Renais B. Mercier-Guyon M. Servajon, D. U. Sauer, S. Lyonnard C. Villevieille
RWTH Aachen | Institute for Power Electronics and Electrical Drives

Combining WAXS, EIS, and Ultrasound Measurements to Enhance Battery Cell Understanding and Optimal Design
P2-069


M.Sc. Daniel Lederer
Co-Autoren:
Fabian Zillken, Christopher Wett, Bugra Turan, Simon Schwunk, Michael Danzer
Dr. Ing. h.c. F. Porsche AG

The Validity of Electrochemical Impedance Spectroscopy of Lithium-Ion Batteries under the Effect of DC Current
P2-070


M.Sc. Tobias Brake
Co-Autoren:
Martin Winter,Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center

Defective lithium ion batteries and their safety risks investigated using LA-ICP-MS
P2-071


Robin Schäfer
Co-Autoren:
Estefane Barbosa Sá, Michael Kasper, Volker Knoblauch, Margret Wohlfahrt-Mehrens, Thomas Waldmann
ZSW Ulm

Electrode Curvature in Li-ion Cells
P2-072


MSc Stephen Dorn
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center

Direct Solid Analysis of Electrode Materials in the Field of Lithium Ion Batteries via Glow Discharge-Sector Field-Mass Spectrometry
P2-073


Leonie Pfeifer
Co-Autoren:
Raphael Mühlpfort, Anne Heß, Thomas Wetzel, Philipp Seegert
Karlsruher Institut für Technologie

Influence of different liquid electrolytes on the performance and stability of batteries with lithium metal anodes
P2-074


Moritz Schütte
RWTH Aachen University | ISEA

Summary of an Extensive Multi-Method Characterization of a Commercial 1.2 Ah 18650 Sodium-Ion Battery Cell
P2-075


Senior Undergraduate (Submitting on behalf of Assoc. Prof. Burak Ülgüt) Fazlı Eren Civan
Co-Autoren:
Burak Ülgüt
Bilkent University, Ankara/Türkiye

Fundamental physical constant fitting via temperature dependent non-linear impedance spectroscopy
P2-076


Fariba Karimi
PowerCo SE

Differential voltage analysis for aging investigation of lithium ion cells
P2-077


Ph.D. Candidate/Research Assistant Gökberk Katırcı
Co-Autoren:
Fazlı Eren Civan, Sunghoon jung, Chae Bong Lee, Burak Ülgüt
Bilkent University

Electrochemical Impedance Spectroscopy (EIS) and Non-Linear Harmonic Analysis (NHA) of Li/SOCl2/SO2Cl2 Batteries
P2-079


PhD Aurélien Sikora
Co-Autoren:
Laura Gemini, Marc Faucon, Girolamo Mincuzzi
ALPhANOV

Laser structuring of electrodes for improved Li-Ion battery performance
P2-080


M. Sc. Jannik Jasper
Co-Autoren:
Jonas Henschel, Simon Lux
Fraunhofer FFB

Flexibility in battery cell design for innovations and scale-up within the battery industry
P2-081


Katrin Junghans
Co-Autoren:
Martin Winter, Markus Börner, Philip Niehoff
University of Münster | MEET Battery Research Center

Fast electrochemical tests for validation of production line Lithium ion battery electrodes
P2-082


Luke Hu
Co-Autoren:
Richard Cai
Electroder

Progression of lithium-ion cell format and its latest development in China market
P2-083


Adrian Herrmann
PEM RWTH Aachen

Analysis of cooling systems for cell-to-pack battery architectures using gapfiller materials
P2-084


Ivo Horstkötter
TU Dresden

Influence of simplifications in lithium-ion battery ageing studies: Experimental investigation of pauses and interruptions in constant-current cycles and their influence on the rainflow-algorithm
P2-085


Katharina Bischof
Co-Autoren:
Vittorio Marangon, Michael Kasper, Aislim Aracil Regalado, Margret Wohlfahrt-Mehrens, Markus Hölzle, Dominic Bresser, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

Analysis of Commercial Sodium-ion Battery Cells and Comparison with Lithium-ion Battery Cells
P2-086


M.Sc. Cedric Kirst
Co-Autoren:
Alexander Karger, Jan P. Singer, Andreas Jossen
TWAICE Technologies GmbH

Non-destructive electrode potential and open-circuit voltage aging estimation for lithium-ion batteries
P2-087


Master of Science Alessandro Innocenti
Co-Autoren:
V. Scheck, R.-G. Scurtu, A. Hoffmann, P. Axmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

Benefits and challenges of the laser structuring of nickel-rich cathodes for lithium-ion batteries
P2-088


Bastian Klinke
Co-Autoren:
Finn van Ginneken, Stefan Essmann, Jürgen Köhler
Physikalisch-Technische Bundesanstalt

Procedure of designing a propagation-safe thermal management system for second-life battery storage considering characteristic aging effects
P2-089


Yannic Sterzl
Co-Autoren:
Martin Pulst, Shizhou Xiao, Wilhelm Pfleging
Karlsruher Institut für Technologie

Recent advances of laser structured electrodes for high power cylindrical LFP battery cells
P2-090


Viktoria Falkowski
Co-Autoren:
Carolyn Reinhold, Niclas Straßburger, Wilhelm Pfleging
Karlsruher Institut für Technologie

Elevating battery technology through ultrafast laser processing
P2-091


Tomáš Šamořil
Co-Autoren:
Jiří Dluhoš, Jiří Honč, Tan Sui, Xuhui Yao
TESCAN GROUP

Surface and Subsurface Characterization of Lithium-Ion Battery Materials Using FIB-SEM with Integrated ToF-SIMS and 3D ToF-SIMS Tomography
P2-092


M. Sc. Vanessa Scheck
Co-Autoren:
Alessandro Innocenti, Rares-George Scurtu, Margret Wohlfahrt-Mehrens, Peter Axmann and Markus Hölzle
ZSW – Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg

Laser Structured Anodes: A Journey from Coin Cells to 21700-type Cylindrical Cells
P2-093


Berik Uzakbaiuly
Co-Autoren:
G. Cha, A. Borchers, S. Pechman, S. Christiansen
Fraunhofer IKTS

µ-Computer tomography of cathode materials for all solid-state Na metal batteries with Na-β″-alumina electrolyte
P2-094


Yoshikazu Sasaki
JEOL Ltd.

In situ charging / discharging Analysis system for LIBs

Postersession 3 „Pack Level – Any Technology”

P3-001anomaly detection in operation data of electric vehiclesDiplom Thomas LehmannFraunhofer Institute for Transportation and Infrastructure Systems IVI
P3-002Use of Strain and Impedance spectroscopy for advanced SoX estimation in LiNiMnAl cellDr. Mikel Oyarbide
Co-Autoren:
M. Oyarbide, I. Cendoya, R. Thomas, V. Heiries, F. Oehler
CIDETEC Energy Storage
P3-003Operando SOC and SOH diagnosis in lithium-ion batteries with voltage-controlled modelsProf. Dr. Wolfgang Bessler
Co-Autoren:
Jonas A. Braun, René Behmann, Daniel Chabrol, Frederik Fuchs
Offenburg University of Applied Sciences
P3-005Operando estimation of capacity and internal resistance of smart phone batteries using a voltage-controlled model: Introduction of an Android appJonas Braun
Co-Autoren:
Wolfgang G. Bessler
Hochschule Offenburg
P3-006Enhancing Battery Monitoring in Modules through Innovative Fiber-Optic Measurement TechniquesFlorian Krause
Co-Autoren:
Stephan Bihn, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P3-007Operando Metal Plating Detection for Cell DevelopmentDavid Wasylowski
Co-Autoren:
Morian Sonnet, Heinrich Ditler, Tim Falkenstein, Luca Leogrande, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P3-008Analysis of the Influence of Cell-to-cell Variations on BMS Performance IndicatorsKatharina Lilith Quade
Co-Autoren:
Dominik Jöst, Elias Barbers, Dirk Uwe Sauer
Institute for Power Electronics and Electrical Drives - RWTH Aachen University
P3-009Distributed impedance spectroscopy - concept, challenges and applications.M. Sc. Christian Rosenmüller
Co-Autoren:
Oliver Bohlen, Julia Kowal
Hochschule für angewandte Wissenschaften München
P3-010Machine learning-based lifelong estimation of lithium plating potentialMaster of Science Yizhou Zhang
Co-Autoren:
Torsten Wik; John Bergström; Changfu Zou
Chalmers University of Technology
P3-011Electrochemical Noise Investigation of Lithium Based Batteries Upon Charging and DischargingAssoc. Prof. Burak Ülgüt
Co-Autoren:
Gözde Karaoğlu
Bilkent University
P3-012Investigation of cell-to-cell parameter variation on fast charging algorithms on pack level using physical-chemical simulationsDaniel Luder
Co-Autoren:
Omar Elahiani, Jie Yu, Dirk Uwe Sauer, Weihan Li
RWTH Aachen University | ISEA
P3-013An Investigation into Battery Thermal Runaway Initiation and PropagationPhD Daniel TorelliExponent - Failure Analysis Associates
P3-014Multimodal Analysis of Mechanical Properties and Temperature Variation during Fast Charging and Aging of Lithium-ion BatteriesMarkus Saal
Co-Autoren:
Simon Feiler, Sarah Hartmann, Guinevere A. Giffin
Fraunhofer ISC
P3-015Battery Immersion Cooling – An Experimental Study on the Influence of the Cooling Concept on the Battery Behavior and the Charging PerformanceThomas Nyhues
Co-Autoren:
Thomas Kalmbach, Jessica Kansy, Andre Loges, Thomas Wetzel, Achim Wiebelt
MAHLE International GmbH / Karlsruhe Institute of Technology
P3-016State-of-Health estimation for lithium-ion batteries with non-invasive identification of aging-related physical parametersM. Sc. Jue ChenInstitute for Power Electronics and Electrical Drives
P3-018Electro-thermal modelling of lithium-ion batteries for internal heating techniques under cold climatesZhan MaRWTH Aachen University
P3-019Cut development time by virtual testing and AI based aging predictionDipl.-Ing. Dr. Gerald SammerAVL
P3-020Influence of aging mechanism on the generated heat during Heat-Wait-Seek tests of type 21700 Lithium-Ion batteries in Accelerating Rate CalorimetryM.Sc. Philipp Finster
Co-Autoren:
Hans J. Seifert, Carlos Ziebert
Karlsruhe Institute of Technology (KIT)
P3-021External Pressure Effects on the Performance and Ageing of High-Capacity NMC/G Lithium-Ion Cells for Automotive and Industrial ApplicationsAnder Avila
Co-Autoren:
M. Azkue, M. Armentia, M. Usabiaga, A. Remirez, E. Miguel, I. Gandiaga
Ikerlan Technology Research Centre
P3-023Temperature and Pressure Influences on Ultrasound Measurements in Li-Ion BatteriesM. Sc. Tobias RöhmelRWTH Aachen University | ISEA
P3-024Data-driven parametrization of battery cell modelsM. Sc. Martin Cornejo
Co-Autoren:
Sammy Jablonski, Andreas Jossen
Technical University of Munich (TUM)
P3-025Multi-field coupling evaluation and modeling approaches for lithium-ion pouch cellsPhD student Xue Cai
Co-Autoren:
Caiping Zhang, Zeping Chen, Jue Chen, Dirk Uwe Sauer, Weihan Li
Power Electronics and Electrical Drives
P3-026Simulation framework for electrical faults in batteries under realworld variancesPaul Busch
Co-Autoren:
Daniel Luder, Thomas Praise John, Dirk Uwe Sauer, Weihan Li
RWTH Aachen
P3-027Lifetime prediction of a lithium-ion cell using a physically-informed, aging-sensitive equivalent circuit modelM.Sc. Patricia Mmeka
Co-Autoren:
Matthieu Dubarry, Wolfgang G. Bessler
Institut für nachhaltige Energiesysteme
P3-029A novel aging characteristics-based feature engineering for battery state of health estimationPhD Caiping Zhang
Co-Autoren:
Jinyu Wang, Caiping Zhang*, Linjing Zhang, Xiaojia Su, Weige Zhang
National Active Distribution Network Technology Research Center | Beijing Jiaotong University
P3-030Multi-information fusion for battery aging diagnosticsPhD Xiaolei Bian
Co-Autoren:
Torsten Wik, Changfu Zou
Chalmers University of Technology
P3-031Research of the thermal behavior of NMC 21700 Li-Ion cells in relation to their aging effects by comparing the DVA and DTV techniquePhilipp HainkeBorgWarner Akasol GmbH
P3-032A Flexible Hardware Concept Using an IQ Modulator for Power Line Communication via BatteriesM.Sc. Hendrik Stork
Co-Autoren:
Florian Krause, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P3-033Reliable and Actionable Insights into the Health, Safety, and Performance of Electric Vehicles in the FieldDr.-Ing. Jonas Keil
Co-Autoren:
Manuel Wanisch, Leo Wildfeuer, Remco van der Burg
TWAICE Technologies GmbH
P3-034Methodology for determination of outgassing products of lithium-ion-batteries during thermal runaway to evaluate possible early electrolyte expulsion to prevent the catastrophic eventB.Sc. Timo Reichrath
Co-Autoren:
Ralf Benger, Ines Hauer, Heinz Wenzl
Energieforschungszentrum Niedersachsen - TU Clausthal
P3-036Aging-aware fast-charging of lithium-ion batteries using model predictive control based on reduced-order electrochemical modelMaster of Science Runyang Lian
Co-Autoren:
Daniel Luder, Dirk Uwe Sauer, Weihan Li
RWTH Aachen University | ISEA
P3-037Enhancing Lithium-Ion Battery Safety: Innovative Inlet Structure for Efficient Inertisation in a 500-Liter Spherical Test BenchM.Sc. Keval Brahmbhatt
Co-Autoren:
Nina Kevlishvili, Jonas Kraft
Fraunhofer Institute for Solar Energy Systems ISE
P3-038Development of an Interface for Vehicle CAN Data Acquisition with Wireless Data Transmission CapabilitiesM.D. Carlos Antônio Rufino Júnior
Co-Autoren:
M.D. Johann Cherian Mathew, Prof. Dr. Hans-Georg Schweiger
Technische Hochschule Ingolstadt
P3-039Battery lifetime early prediction based on hierarchical Bayesian modelPhD candidate Zihao Zhou
Co-Autoren:
Tingkai Li, Adam Thelen, David Howey, Chao Hu
University of Oxford
P3-040Fortschrittliches Batteriemanagement (BMS) für Flugzeugnotstromversorgungen mit ImpedanzerfassungDr.Ing. Wolfgang ScheuerpflugDiehl Aerospace GmbH
P3-041Dual Thermal Imaging Method for Li-ion Battery Temperature DeterminationM.Sc. Hanna Hoch
Co-Autoren:
Florian Krause, Stephan Bihn, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P3-042Increasing Battery Safety of LIB by using Cell-Internal Glass Fiber Sensors for in-situ Temperature MonitoringDr. Alexandra Burger
Co-Autoren:
Florian Krause, Bruno Bausch, Olaf Böse, Jannes Ophey, Andreas Würsig, Dirk Uwe Sauer, Holger Kapels
Fraunhofer Institute for Silicon Technology ISIT
P3-043Detection of Cell Imbalances by Module-Level Electrochemical Impedance SpectroscopySehriban Celik
Co-Autoren:
Zhan Ma, Zijuan Hong, David Wasylowski, Dirk Uwe Sauer
RWTH Aachen University
P3-044Current approaches for inline monitoring of the drying process of battery electrodesJonas Mohacsi
Co-Autoren:
Kevin Ky, Andreas Altvater, Philip Scharfer, Wilhelm Schabel
Karlsruhe Institute of Technology
P3-046Automotive Embedded System for Electrochemical Impedance Spectroscopy implementation on Li-ion batteriesPh.D. Filippo Bonaccorso
Co-Autoren:
Ester VASTA, Marco BRANCIFORTE, Alessandro FAULISI, Akshay MISRA
STMicroelectronics
P3-047Wood - a Protection Material Against Thermal Propagation in Battery PacksNikolas Jaroch
Co-Autoren:
Serkan Sevinc
Technische Hochschule Ingolstadt
P3-048Remaining Useful Life Prediction using machine-learningM.D. Carlos Antônio Rufino Júnior
Co-Autoren:
Hans-Georg Schweiger
Technische Hochschule Ingolstadt
P3-049An Intermodular Active Balancing Topology for Efficient Operation of High Voltage Battery Packs: Switched (Flying) DC/DC ConverterMurat CeylanGTU
P3-050Methodic developement of a battery module housingLeonard John
Co-Autoren:
J. Liebertseder , H. De Keyser , A. Dekeyser , L.-F. Berg , J. Tübke , M. Doppelbauer
Fraunhofer ICT
P3-051Interferometric expansion measurement on lithium iron phosphate cells for the detection of the intercalation capability of graphiteSebastian Gielinger
Co-Autoren:
Thiemo Hein, Gunther Bohn
Technische Hochschule Würzburg-Schweinfurt
P3-001


Diplom Thomas Lehmann
Fraunhofer Institute for Transportation and Infrastructure Systems IVI

anomaly detection in operation data of electric vehicles
P3-002


Dr. Mikel Oyarbide
Co-Autoren:
M. Oyarbide, I. Cendoya, R. Thomas, V. Heiries, F. Oehler
CIDETEC Energy Storage

Use of Strain and Impedance spectroscopy for advanced SoX estimation in LiNiMnAl cell
P3-003


Prof. Dr. Wolfgang Bessler
Co-Autoren:
Jonas A. Braun, René Behmann, Daniel Chabrol, Frederik Fuchs
Offenburg University of Applied Sciences

Operando SOC and SOH diagnosis in lithium-ion batteries with voltage-controlled models
P3-005


Jonas Braun
Co-Autoren:
Wolfgang G. Bessler
Hochschule Offenburg

Operando estimation of capacity and internal resistance of smart phone batteries using a voltage-controlled model: Introduction of an Android app
P3-006


Florian Krause
Co-Autoren:
Stephan Bihn, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Enhancing Battery Monitoring in Modules through Innovative Fiber-Optic Measurement Techniques
P3-007


David Wasylowski
Co-Autoren:
Morian Sonnet, Heinrich Ditler, Tim Falkenstein, Luca Leogrande, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Operando Metal Plating Detection for Cell Development
P3-008


Katharina Lilith Quade
Co-Autoren:
Dominik Jöst, Elias Barbers, Dirk Uwe Sauer
Institute for Power Electronics and Electrical Drives - RWTH Aachen University

Analysis of the Influence of Cell-to-cell Variations on BMS Performance Indicators
P3-009


M. Sc. Christian Rosenmüller
Co-Autoren:
Oliver Bohlen, Julia Kowal
Hochschule für angewandte Wissenschaften München

Distributed impedance spectroscopy - concept, challenges and applications.
P3-010


Master of Science Yizhou Zhang
Co-Autoren:
Torsten Wik; John Bergström; Changfu Zou
Chalmers University of Technology

Machine learning-based lifelong estimation of lithium plating potential
P3-011


Assoc. Prof. Burak Ülgüt
Co-Autoren:
Gözde Karaoğlu
Bilkent University

Electrochemical Noise Investigation of Lithium Based Batteries Upon Charging and Discharging
P3-012


Daniel Luder
Co-Autoren:
Omar Elahiani, Jie Yu, Dirk Uwe Sauer, Weihan Li
RWTH Aachen University | ISEA

Investigation of cell-to-cell parameter variation on fast charging algorithms on pack level using physical-chemical simulations
P3-013


PhD Daniel Torelli
Exponent - Failure Analysis Associates

An Investigation into Battery Thermal Runaway Initiation and Propagation
P3-014


Markus Saal
Co-Autoren:
Simon Feiler, Sarah Hartmann, Guinevere A. Giffin
Fraunhofer ISC

Multimodal Analysis of Mechanical Properties and Temperature Variation during Fast Charging and Aging of Lithium-ion Batteries
P3-015


Thomas Nyhues
Co-Autoren:
Thomas Kalmbach, Jessica Kansy, Andre Loges, Thomas Wetzel, Achim Wiebelt
MAHLE International GmbH / Karlsruhe Institute of Technology

Battery Immersion Cooling – An Experimental Study on the Influence of the Cooling Concept on the Battery Behavior and the Charging Performance
P3-016


M. Sc. Jue Chen
Institute for Power Electronics and Electrical Drives

State-of-Health estimation for lithium-ion batteries with non-invasive identification of aging-related physical parameters
P3-018


Zhan Ma
RWTH Aachen University

Electro-thermal modelling of lithium-ion batteries for internal heating techniques under cold climates
P3-019


Dipl.-Ing. Dr. Gerald Sammer
AVL

Cut development time by virtual testing and AI based aging prediction
P3-020


M.Sc. Philipp Finster
Co-Autoren:
Hans J. Seifert, Carlos Ziebert
Karlsruhe Institute of Technology (KIT)

Influence of aging mechanism on the generated heat during Heat-Wait-Seek tests of type 21700 Lithium-Ion batteries in Accelerating Rate Calorimetry
P3-021


Ander Avila
Co-Autoren:
M. Azkue, M. Armentia, M. Usabiaga, A. Remirez, E. Miguel, I. Gandiaga
Ikerlan Technology Research Centre

External Pressure Effects on the Performance and Ageing of High-Capacity NMC/G Lithium-Ion Cells for Automotive and Industrial Applications
P3-023


M. Sc. Tobias Röhmel
RWTH Aachen University | ISEA

Temperature and Pressure Influences on Ultrasound Measurements in Li-Ion Batteries
P3-024


M. Sc. Martin Cornejo
Co-Autoren:
Sammy Jablonski, Andreas Jossen
Technical University of Munich (TUM)

Data-driven parametrization of battery cell models
P3-025


PhD student Xue Cai
Co-Autoren:
Caiping Zhang, Zeping Chen, Jue Chen, Dirk Uwe Sauer, Weihan Li
Power Electronics and Electrical Drives

Multi-field coupling evaluation and modeling approaches for lithium-ion pouch cells
P3-026


Paul Busch
Co-Autoren:
Daniel Luder, Thomas Praise John, Dirk Uwe Sauer, Weihan Li
RWTH Aachen

Simulation framework for electrical faults in batteries under realworld variances
P3-027


M.Sc. Patricia Mmeka
Co-Autoren:
Matthieu Dubarry, Wolfgang G. Bessler
Institut für nachhaltige Energiesysteme

Lifetime prediction of a lithium-ion cell using a physically-informed, aging-sensitive equivalent circuit model
P3-029


PhD Caiping Zhang
Co-Autoren:
Jinyu Wang, Caiping Zhang*, Linjing Zhang, Xiaojia Su, Weige Zhang
National Active Distribution Network Technology Research Center | Beijing Jiaotong University

A novel aging characteristics-based feature engineering for battery state of health estimation
P3-030


PhD Xiaolei Bian
Co-Autoren:
Torsten Wik, Changfu Zou
Chalmers University of Technology

Multi-information fusion for battery aging diagnostics
P3-031


Philipp Hainke
BorgWarner Akasol GmbH

Research of the thermal behavior of NMC 21700 Li-Ion cells in relation to their aging effects by comparing the DVA and DTV technique
P3-032


M.Sc. Hendrik Stork
Co-Autoren:
Florian Krause, Dirk Uwe Sauer
RWTH Aachen University | ISEA

A Flexible Hardware Concept Using an IQ Modulator for Power Line Communication via Batteries
P3-033


Dr.-Ing. Jonas Keil
Co-Autoren:
Manuel Wanisch, Leo Wildfeuer, Remco van der Burg
TWAICE Technologies GmbH

Reliable and Actionable Insights into the Health, Safety, and Performance of Electric Vehicles in the Field
P3-034


B.Sc. Timo Reichrath
Co-Autoren:
Ralf Benger, Ines Hauer, Heinz Wenzl
Energieforschungszentrum Niedersachsen - TU Clausthal

Methodology for determination of outgassing products of lithium-ion-batteries during thermal runaway to evaluate possible early electrolyte expulsion to prevent the catastrophic event
P3-036


Master of Science Runyang Lian
Co-Autoren:
Daniel Luder, Dirk Uwe Sauer, Weihan Li
RWTH Aachen University | ISEA

Aging-aware fast-charging of lithium-ion batteries using model predictive control based on reduced-order electrochemical model
P3-037


M.Sc. Keval Brahmbhatt
Co-Autoren:
Nina Kevlishvili, Jonas Kraft
Fraunhofer Institute for Solar Energy Systems ISE

Enhancing Lithium-Ion Battery Safety: Innovative Inlet Structure for Efficient Inertisation in a 500-Liter Spherical Test Bench
P3-038


M.D. Carlos Antônio Rufino Júnior
Co-Autoren:
M.D. Johann Cherian Mathew, Prof. Dr. Hans-Georg Schweiger
Technische Hochschule Ingolstadt

Development of an Interface for Vehicle CAN Data Acquisition with Wireless Data Transmission Capabilities
P3-039


PhD candidate Zihao Zhou
Co-Autoren:
Tingkai Li, Adam Thelen, David Howey, Chao Hu
University of Oxford

Battery lifetime early prediction based on hierarchical Bayesian model
P3-040


Dr.Ing. Wolfgang Scheuerpflug
Diehl Aerospace GmbH

Fortschrittliches Batteriemanagement (BMS) für Flugzeugnotstromversorgungen mit Impedanzerfassung
P3-041


M.Sc. Hanna Hoch
Co-Autoren:
Florian Krause, Stephan Bihn, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Dual Thermal Imaging Method for Li-ion Battery Temperature Determination
P3-042


Dr. Alexandra Burger
Co-Autoren:
Florian Krause, Bruno Bausch, Olaf Böse, Jannes Ophey, Andreas Würsig, Dirk Uwe Sauer, Holger Kapels
Fraunhofer Institute for Silicon Technology ISIT

Increasing Battery Safety of LIB by using Cell-Internal Glass Fiber Sensors for in-situ Temperature Monitoring
P3-043


Sehriban Celik
Co-Autoren:
Zhan Ma, Zijuan Hong, David Wasylowski, Dirk Uwe Sauer
RWTH Aachen University

Detection of Cell Imbalances by Module-Level Electrochemical Impedance Spectroscopy
P3-044


Jonas Mohacsi
Co-Autoren:
Kevin Ky, Andreas Altvater, Philip Scharfer, Wilhelm Schabel
Karlsruhe Institute of Technology

Current approaches for inline monitoring of the drying process of battery electrodes
P3-046


Ph.D. Filippo Bonaccorso
Co-Autoren:
Ester VASTA, Marco BRANCIFORTE, Alessandro FAULISI, Akshay MISRA
STMicroelectronics

Automotive Embedded System for Electrochemical Impedance Spectroscopy implementation on Li-ion batteries
P3-047


Nikolas Jaroch
Co-Autoren:
Serkan Sevinc
Technische Hochschule Ingolstadt

Wood - a Protection Material Against Thermal Propagation in Battery Packs
P3-048


M.D. Carlos Antônio Rufino Júnior
Co-Autoren:
Hans-Georg Schweiger
Technische Hochschule Ingolstadt

Remaining Useful Life Prediction using machine-learning
P3-049


Murat Ceylan
GTU

An Intermodular Active Balancing Topology for Efficient Operation of High Voltage Battery Packs: Switched (Flying) DC/DC Converter
P3-050


Leonard John
Co-Autoren:
J. Liebertseder , H. De Keyser , A. Dekeyser , L.-F. Berg , J. Tübke , M. Doppelbauer
Fraunhofer ICT

Methodic developement of a battery module housing
P3-051


Sebastian Gielinger
Co-Autoren:
Thiemo Hein, Gunther Bohn
Technische Hochschule Würzburg-Schweinfurt

Interferometric expansion measurement on lithium iron phosphate cells for the detection of the intercalation capability of graphite

Postersession 4 „Applications“

P4-001Open battery - a construction kit for photovoltaic systems with energy storageLars Krüger
Co-Autoren:
D. Wiemann, P. Teske, M. Gentejohann, J. Kowal, S. Dieckerhoff and M. Jaeger-Erben
TU Berlin
P4-002Optimized combined operation of a Battery Energy Storage System and an Electrolyzer using Reinforcement LearningPatrick Moessle
Co-Autoren:
Harry, Keeton; Michael A. Danzer
University of Bayreuth
P4-003Investigations of fast charging strategies for lithium-ion battery cells with silicon-graphite anodes using an electrode equivalent circuit model approachM.Sc. Oliver LandrathTechnische Universität Braunschweig | elenia Institute for High Voltage Technology and Power Systems
P4-004Analyzing Power Demands and Flexibility Potentials of Commercial Electric Vehicle Fleets in GermanyM.Sc Jingyu Gong
Co-Autoren:
Mark Junker, Jan Figgener, Christopher Hecht, Payas Dinesh Vartak, Dirk Uwe Sauer
RWTH Aachen University | ISEA
P4-005Generative Design in Development and ProductionMarco Kachler
Co-Autoren:
Anita Bongards
BorgWarner
P4-007Advanced Training for Adressing the Skills ShortageDr. rer. nat. Wolfgang Brehm
Co-Autoren:
Vivien Gutowska, Franz Dietrich, Julia Kowal
TU Berlin
P4-008Battery Aging Prediction for Battery Electric Heavy-Duty TrucksDaniel Gajowski
Co-Autoren:
Phil Keller, Jan Neunzling, Prashant Hegde
BorgWarner Stuttgart
P4-009Geostrategic Competition for Leadership in Next-Generation Batteries: Using Patent Data to Guide Decision-MakingAndré Hemmelder
Co-Autoren:
Frank Tietze, Simon Lux, Jens Leker
University of Münster
P4-010Hybrid energy storage system and operational strategy for an electrified trailer unit of a 40-ton truckAshwin KarthikeyanFraunhofer LBF
P4-011Optimized fast charging considering battery temperature under natural convectionJiacheng He
Co-Autoren:
Theodoros Kalogiannis, Xia Zeng, Md Sazzad Hosen, Maitane Berecibar
Vrije Universiteit Brussel
P4-012Battery Design for Heavy-Duty Commercial Vehicles: Data-Driven Extraction of Typical Load-Profile FeaturesHanno Winter
Co-Autoren:
Benjamin Reichardt, Hanno Winter, Jan Neunzling, Matthias Fleckenstein
BorgWarner Akasol GmbH
P4-013AI-supported Model-based Knowledge Management in HV Battery DevelopmentM.Sc Ibtihal Badi
Co-Autoren:
Lena Kallis, Andreas Braun
AVL Deutschland GmbH
P4-014Zink-Ionen-Batterien auf Basis von Preußisch-Blau-Analoga für stationäre SpeicheranwendungenDr. Jens Glenneberg
Co-Autoren:
Dr. Daniela Fenske, Dr. Julian Schwenzel
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM
P4-015The logistics of a large-scale Lithium-ion battery production in Europe, mapping out the path from mine to cell.Jesper Frost Thomsen
Co-Autoren:
Simon Lux
University of Münster
P4-016Evaluation of Battery Ageing in Electric Hybrid Storage SystemsRoman Mödl
Co-Autoren:
Andreas Braun, Lena Kallis
AVL Deutschland GmbH
P4-017Investigation of production-related cell-to-cell variation for automotive 12V high-power applicationsDaniel Evans
Co-Autoren:
Daniel Martin Brieske, Claas Tebrügge, Julia Kowal
HELLA GmbH & Co. KGaA
P4-018Adhesion property and electrochemical characteristics with different binder system combinations in lithium ion batteriesAnja RajicTU Braunschweig, Institut für Füge- und Schweißtechnik
P4-0193D-Simulation of the porous gas flow during a thermal event in a battery cell.Marcel Tumelero
Co-Autoren:
S.Herberich, F. Kiesewetter, E. Knobbe, U. Krewer
BMW AG
P4-020Representative Battery Load Profiles for novel HV-Battery ConceptsKonrad Katzschke
Co-Autoren:
Alexander Epp, Tamás Kurczveil, Andreas Rausch
Volkswagen AG
P4-021Cell SwellingM.Sc Anton Stenstrand
Co-Autoren:
David Carlstedt
Volvo Cars
P4-022Multiscale modelling strategies for predicting the mechanical response of Li-ion batteries in electric vehiclesPhD David Carlstedt
Co-Autoren:
Anton Stenstrand
Volvo Cars
P4-023Optimizing Stationary Hybrid Storage: Aging Parameter Identification for Improved PerformanceSamira Kiefer
Co-Autoren:
Maximilian Bruch, Daniel Bahro, Magdalena Graczyk-Zajac
EnBW Energie Baden-Württemberg AG
P4-024Holistic Battery Simulation Toolchain: From Cell Design to System Performance in ApplicationsSammy JablonskiTechnische Universität München
P4-025Batterie-Bildungsnetzwerk Bayern (B³-Bayern) – Tailormade Qualification Concepts along the battery value chain for SMEsDr. Guinevere Giffin
Co-Autoren:
Jochen Settelein
Fraunhofer Institute for Silicate Research ISC
P4-026Impact of carbon conductive additive choice on the resistivity of the cathode sheets over calendaringDr. Theodoor Anton (Ron) Hendriks
Co-Autoren:
Alexander Naßmacher, Jana Soborka, Alex Friesen
Cabot Battery Materials GmbH
P4-027Battery simulations of real-world electric vehicle dataLuc Raijmakers
Co-Autoren:
Haider A. A. Ali, Hermann Tempel, Lea J. Riebesel, André L. H. S. Xhonneux, Stefan Kasselmann, Dirk Müller, and Rüdiger-A Eichel
Forschungszentrum Jülich
P4-028BetterBat - Find the right cell for every applicationTim HettesheimerFraunhofer ISI
P4-001


Lars Krüger
Co-Autoren:
D. Wiemann, P. Teske, M. Gentejohann, J. Kowal, S. Dieckerhoff and M. Jaeger-Erben
TU Berlin

Open battery - a construction kit for photovoltaic systems with energy storage
P4-002


Patrick Moessle
Co-Autoren:
Harry, Keeton; Michael A. Danzer
University of Bayreuth

Optimized combined operation of a Battery Energy Storage System and an Electrolyzer using Reinforcement Learning
P4-003


M.Sc. Oliver Landrath
Technische Universität Braunschweig | elenia Institute for High Voltage Technology and Power Systems

Investigations of fast charging strategies for lithium-ion battery cells with silicon-graphite anodes using an electrode equivalent circuit model approach
P4-004


M.Sc Jingyu Gong
Co-Autoren:
Mark Junker, Jan Figgener, Christopher Hecht, Payas Dinesh Vartak, Dirk Uwe Sauer
RWTH Aachen University | ISEA

Analyzing Power Demands and Flexibility Potentials of Commercial Electric Vehicle Fleets in Germany
P4-005


Marco Kachler
Co-Autoren:
Anita Bongards
BorgWarner

Generative Design in Development and Production
P4-007


Dr. rer. nat. Wolfgang Brehm
Co-Autoren:
Vivien Gutowska, Franz Dietrich, Julia Kowal
TU Berlin

Advanced Training for Adressing the Skills Shortage
P4-008


Daniel Gajowski
Co-Autoren:
Phil Keller, Jan Neunzling, Prashant Hegde
BorgWarner Stuttgart

Battery Aging Prediction for Battery Electric Heavy-Duty Trucks
P4-009


André Hemmelder
Co-Autoren:
Frank Tietze, Simon Lux, Jens Leker
University of Münster

Geostrategic Competition for Leadership in Next-Generation Batteries: Using Patent Data to Guide Decision-Making
P4-010


Ashwin Karthikeyan
Fraunhofer LBF

Hybrid energy storage system and operational strategy for an electrified trailer unit of a 40-ton truck
P4-011


Jiacheng He
Co-Autoren:
Theodoros Kalogiannis, Xia Zeng, Md Sazzad Hosen, Maitane Berecibar
Vrije Universiteit Brussel

Optimized fast charging considering battery temperature under natural convection
P4-012


Hanno Winter
Co-Autoren:
Benjamin Reichardt, Hanno Winter, Jan Neunzling, Matthias Fleckenstein
BorgWarner Akasol GmbH

Battery Design for Heavy-Duty Commercial Vehicles: Data-Driven Extraction of Typical Load-Profile Features
P4-013


M.Sc Ibtihal Badi
Co-Autoren:
Lena Kallis, Andreas Braun
AVL Deutschland GmbH

AI-supported Model-based Knowledge Management in HV Battery Development
P4-014


Dr. Jens Glenneberg
Co-Autoren:
Dr. Daniela Fenske, Dr. Julian Schwenzel
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM

Zink-Ionen-Batterien auf Basis von Preußisch-Blau-Analoga für stationäre Speicheranwendungen
P4-015


Jesper Frost Thomsen
Co-Autoren:
Simon Lux
University of Münster

The logistics of a large-scale Lithium-ion battery production in Europe, mapping out the path from mine to cell.
P4-016


Roman Mödl
Co-Autoren:
Andreas Braun, Lena Kallis
AVL Deutschland GmbH

Evaluation of Battery Ageing in Electric Hybrid Storage Systems
P4-017


Daniel Evans
Co-Autoren:
Daniel Martin Brieske, Claas Tebrügge, Julia Kowal
HELLA GmbH & Co. KGaA

Investigation of production-related cell-to-cell variation for automotive 12V high-power applications
P4-018


Anja Rajic
TU Braunschweig, Institut für Füge- und Schweißtechnik

Adhesion property and electrochemical characteristics with different binder system combinations in lithium ion batteries
P4-019


Marcel Tumelero
Co-Autoren:
S.Herberich, F. Kiesewetter, E. Knobbe, U. Krewer
BMW AG

3D-Simulation of the porous gas flow during a thermal event in a battery cell.
P4-020


Konrad Katzschke
Co-Autoren:
Alexander Epp, Tamás Kurczveil, Andreas Rausch
Volkswagen AG

Representative Battery Load Profiles for novel HV-Battery Concepts
P4-021


M.Sc Anton Stenstrand
Co-Autoren:
David Carlstedt
Volvo Cars

Cell Swelling
P4-022


PhD David Carlstedt
Co-Autoren:
Anton Stenstrand
Volvo Cars

Multiscale modelling strategies for predicting the mechanical response of Li-ion batteries in electric vehicles
P4-023


Samira Kiefer
Co-Autoren:
Maximilian Bruch, Daniel Bahro, Magdalena Graczyk-Zajac
EnBW Energie Baden-Württemberg AG

Optimizing Stationary Hybrid Storage: Aging Parameter Identification for Improved Performance
P4-024


Sammy Jablonski
Technische Universität München

Holistic Battery Simulation Toolchain: From Cell Design to System Performance in Applications
P4-025


Dr. Guinevere Giffin
Co-Autoren:
Jochen Settelein
Fraunhofer Institute for Silicate Research ISC

Batterie-Bildungsnetzwerk Bayern (B³-Bayern) – Tailormade Qualification Concepts along the battery value chain for SMEs
P4-026


Dr. Theodoor Anton (Ron) Hendriks
Co-Autoren:
Alexander Naßmacher, Jana Soborka, Alex Friesen
Cabot Battery Materials GmbH

Impact of carbon conductive additive choice on the resistivity of the cathode sheets over calendaring
P4-027


Luc Raijmakers
Co-Autoren:
Haider A. A. Ali, Hermann Tempel, Lea J. Riebesel, André L. H. S. Xhonneux, Stefan Kasselmann, Dirk Müller, and Rüdiger-A Eichel
Forschungszentrum Jülich

Battery simulations of real-world electric vehicle data
P4-028


Tim Hettesheimer
Fraunhofer ISI

BetterBat - Find the right cell for every application

Postersession 5 „Battery Life Cycle”

P5-001Exploring Aging Mechanisms in Lithium-Ion Battery Cells: Correlating Floating Current with Traditional Ageing IndicatorsMaya Strautmann
Co-Autoren:
Gereon Stahl M.Sc., Prof. Dr. rer. nat. Dirk Uwe Sauer
RWTH Aachen
P5-002Impact of CMC and its Dosage Type on the Dispersing Process and the Cell Performance of Lithium-Ion Battery AnodesRené Jagau
Co-Autoren:
P. Michalowski; A. Kwade
P5-003Potentials of waste from electric and electronic equipment (WEEE) - A case study on Discarded Mobile PhonesProf. Dr.-Ing. Thomas Hofmann
Co-Autoren:
Annkatrin Ott-Schwenk, Christian Richter
Hochschule für Wirtschaft und Umwelt Nürtiingen-Geislingen
P5-004Automated dismantling system for variant-flexible battery recyclingPhilip Gümbel
Co-Autoren:
Leif Tönjes, Maja Kandula, Klaus Dröder, Klaus Dilger
TU-Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
P5-005Polymer process technology for battery productionDr. Nicolaus RehseCollin Lab & Pilot Solutions GmbH
P5-006Battery production – Automated quality assurance along the entire lineGeorg NelkeOptiSense Gesellschaft für Optische Prozessmesstechnik mbH & Co. KG
P5-008Quality-oriented and energy-reduced production technology for LIB and NextGen production in mini-environmentsMarcel BerlingFraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P5-009How the Sample Introduction Influences the Result: Identification of Electrolyte Residues in LIB Recycling Material via GC-MSJakob Michael Hesper
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster
P5-010Sustainable production of LiFePO4 – based positive electrodes by implementing aqueous processing with different binder systemsChirag Arunbhai VankaniUniversity of Münster | MEET Battery Research Center
P5-011State of Health Estimation of Lithium-Ion Batteries using Transfer Learning Strategies in Dynamic Operating Conditions for Cloud BMSPh.D (Pursuing) Nitika Ghosh
Co-Autoren:
Dr. Alexander Warnecke
Indian Institute of Technology Delhi
P5-012Lithium Recovery from Pyrometallurgical Slags through Dry Milling and FlotationM. Sc. Mechanical Engineering Sima Hellmers
Co-Autoren:
Hao Qiu, Marko Ranneberg, Harald Zetzener, Arno Kwade
TU Braunschweig/ Institute for Particle Technology
P5-013Temperature-Driven Path Dependence during cyclic aging of Li-Ion BatteriesMax Feinauer
Co-Autoren:
Gabriela Gerosa, Margret Wohlfahrt-Mehrens, Markus Hölzle, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
P5-014Effects of Metal Oxalates from Recycling on Li-Ion-BatteriesAnna RollinTU Braunschweig | elenia - Institute for High Voltage Technology and Energy Systems
P5-015Towards Effective Data Management in Battery RecyclingSandro Süß
Co-Autoren:
Alexander Nickol; Wei Song; Regina Koreng; Dennis Beusen; Mark Mennenga; Bernd Friedrich; Alexander Michaelis; Arno Kwade; Christoph Herrmann
Technische Universität Braunschweig
P5-016Launch Management with dedicated Maturity Level ModelMarkus Eckstein
Co-Autoren:
Dariush Shabany; Kevin Pouls; Antje Fitzner; Daniel Becker; Joana Flanse; Lisa Angold
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P5-017Optimizing Lithium Ion Battery Recycling: Electrolyte and Organic Binder Extraction via Supercritical Carbon DioxideMarie Heidler
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center
P5-018Infrared-drying in electrode manufacturing: Effects on lithium iron phosphate cathode propertiesCarola Rindi
Co-Autoren:
Hannah Mittag, Raoul Höller
Fraunhofer Einrichtung Forschungsfertigung Batteriezelle
P5-021Innovative Metal Refining Leading a Sustainable Circular EconomyMBA Guillermo EspigaNth Cycle
P5-023Battery Diagnosis - from Field to Recycling ProcessDipl.-Ing. Ronny Petersohn
Co-Autoren:
Klara Schwibs, Robin Grunau, Somyeong Park, Matthias Schelter
Hoppecke Rail Systems GmbH
P5-024Solutions for Battery Materials Characterization and Implications for the Process ChainDr. Christopher Giehl
Co-Autoren:
Loredana Völker-Pop
Anton Paar Germany GmbH
P5-025Comprehensive Analysis of Systematically Accelerated Formation in 1 Ah Lithium Ion Battery Pouch CellsMaster of Science Mika Hellkuhl
Co-Autoren:
Bastian Heidrich, Martin Winter, Philip Niehoff
Universität Münster
P5-026Understanding Cause-Effect-Relationships in Electrolyte Filling of Prismatic Lithium-Ion Battery Cells by SimulationMichael Hinkers
Co-Autoren:
Sai Viswanath Kommineni, Kristina Borzutzki
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P5-027Validation of a numerical model to test HV Batteries module leakageM.Sc. Matthew Sleight
Co-Autoren:
Stefan Adami, Gauthier Vanderlinden, Mathieu Mulmann, Thomas Indinger
Technical University of Munich
P5-028Validation of a numerical model to test High Voltage Batteries module leakageM.Sc. Matthew Sleight
Co-Autoren:
Stefan Adami, Mathieu Mulmann, Gauthier Vanderlinden, Thomas Indinger
Technical University of Munich
P5-029Non-destructive Weld Joint Analysis by Scanning Acoustic Microscopy and X-ray AbsorptionChristian Schiller
Co-Autoren:
Andreas Hasenfratz, Nicolas Wilhelm, Stephan Hoffmann, Achim Kraft
Fraunhofer Institute for Solar Energy Systems ISE
P5-030Post-drying Technologies for Battery Cell Production: Comparison of Different Baking TechnologiesMatthias SmulkaRWTH Aachen University
P5-031Investigation of the expansion of battery cells with chromatic confocal distance sensors under varying mechanical stressM.Sc. Daniel Nusko
Co-Autoren:
Tessa Krause, Luciana Pitta Bauermann, Matthias Vetter
Fraunhofer Institut für Solare Energiesysteme ISE
P5-032Leaching of Cathode Materials by Electrochemical Generation of PeroxysulfateMark Melvin Pradja
Co-Autoren:
Christian Modrzynski
Dechema Forschungsinstitut
P5-033Solvent-Reduced Continuous Processing of Lithium-Ion Battery Electrodes: Effects on Rheology, Morphology and Coating QualityNiklas Penningh
Co-Autoren:
Robin Moschner, Arno Kwade
Technische Universität Braunschweig
P5-034Environmental Impacts of Hydrometallurgical Recycling for NMC Batteries – A ReviewLuca StegemannUniversity of Münster
P5-035Integration of an expert system into the IT-architecture of a battery production plantM.Sc. Nils Christian Hamacher
Co-Autoren:
Tom Hülsmann, Wilhelm Jaspers
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P5-036Prediction of Lithium-ion Battery Cycle Life Using Nonlinear Decay Turnning Pointassociate professor Jiangong Zhu
Co-Autoren:
Weng Wenyuan ,You Heze ,Wei Xuezhe ,Dai Haifeng
Tongji University
P5-037Synthesizing and Integration of a Thick Reference Electrode for Commercial Cylindrical Li-ion BatteriesPankaj Chandan Solanki
Co-Autoren:
Luc H.J. Raijmakers, Dmitri L. Danilov, Peter H.L. Notten, Rüdiger -A. Eichel
Forschungszentrum Jülich GmbH
P5-040Identifying key degradation patterns as a function of ageing temperature: A post-mortem studyPh.D. John Ostrander
Co-Autoren:
David Wragg, Preben J.S. Vie, Julia Wind, and Alexei Koposov
Institutt for energi teknology
P5-041Characterizing Battery Material Performance and Sustainability: Insights from Particle Size and Shape AnalysisPhD Mateusz Skalon
Co-Autoren:
Dr. Henrique Brasil, Dr. Marius Kremer
Anton Paar GmbH
P5-042Electrolyte wetting in the production of lithium ion batteries: a simulation approachDr. Jochen Zausch
Co-Autoren:
Dariusz Niedziela, Dominik Becker, Stefan Rief, Konrad Steiner
Fraunhofer ITWM
P5-043Battery slurry production in batch processes – A study with CFD simulationsM.Sc. Felix-Tom Möhlen
Co-Autoren:
M.Weber, C. Schilde, A. Kwade
Technische Universität Braunschweig, Institute for Particle Technology (iPAT)
P5-044Preperation and characterization of extruded high-energy cathodesJonas NeumeyerZentrum Für Sonnenenergie- Und Wasserstoffforschung Baden-Württemberg
P5-045Advanced Mechanical Treatment of Used Lithium-ion BatteriesMerle Zorn
Co-Autoren:
Sigrid Hams, Sabine Flamme
FH Münster - Institute for Institute for Infrastructure · Water · Resources · Environment
P5-046Adaptive SoC estimation for second-life lithium-ion batteries in grid-scale applicationsXia ZENG
Co-Autoren:
Md Sazzad Hosen, Amir F. Samadi, Jiacheng He, Maitane Berecibar
Vrije Universiteit Brussel
P5-047Lithium-Ion Batteries beyond the knee – Lifetime Extension via Alteration of Operating ConditionsMaster of Science (M.Sc.) Henry Winner
Co-Autoren:
Nils Collath, Andreas Jossen
Technische Universität München
P5-048Challenges of Simultaneous Factory, Plant and Process Planning for the Cell Finishing in Battery Cell ProductionM. Sc. Lukas Kokozinski
Co-Autoren:
Max Niggestich, Robin Drees, Jonas Wieskamp, Florenz Janning
Fraunhofer Research Institution for Battery Cell Production FFB
P5-049Upscaling of Fast Charging Formation Strategies from Coin to Pouch CellsRobin DreesFraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P5-050Mechanical stress and its effects on the expansion of Li-Ion cells: characteristics, consequences, and influenceM. Eng. Christina Schieber
Co-Autoren:
Prof. Dr. Hans-Georg Schweiger
Technische Hochschule Ingolstadt
P5-051ELECTROCHEMICAL DISCHARGE OF LI-ION BATTERIES USING K2CO3 ELECTROLYTE: ANALYSIS OF DISCHARGE VOLTAGE, CURRENT AND pHPhD Arjun MuralidharanAalto University
P5-053Recycling Strategies for Spent Consumer Lithium-Ion BatteriesM. Sc. Moritz Petzold
Co-Autoren:
Sigrid Hams, Sabine Flamme, Maximiliano A. Zenisch, Marc Vahnstiege, Sascha Nowak
FH Münster - Institute for Institute for Infrastructure · Water · Resources · Environment
P5-054Processing of graphite anode via extrusion for dry coating of lithium-ion batteriesMilena Lux
Co-Autoren:
Marcella Horst, Peter Michalowski, Arno Kwade
Technische Universität Braunschweig, Institut für Partikeltechnik
P5-055Can sodium-ion batteries challenge lithium-ion batteries in performance and sustainability? Combining energy density modelling and life cycle assessmentPhilipp Voß
Co-Autoren:
Benedikt Gruber, Miriam Mitterfellner, Jan-Darius Plöpst, Florian Degen, Richard Schmuch, Simon Lux
University of Münster
P5-056The intellectual property enabling gigafactory battery cell production: An in-depth analysis of international patenting trendsMaster of Science Tim Greitemeier
Co-Autoren:
Simon Lux
Universität Münster
P5-057The influence of different graphite types on the dry coating of lithium-ion battery anodesM.Sc. Franziska Beverborg
Co-Autoren:
M. Sc. Marcella Horst, Dr. rer. nat Peter Michalowski, Prof. Dr.-Ing. Arno Kwade
TU Braunschweig | Institut für Partikeltechnik
P5-059Censoring in Lithium-ion Battery Lifetime TestingYao LuRWTH Aachen University
P5-060Quantifying energy flows for life cycle assessment – Developing life cycle inventories for direct recycling processesHannes Lefherz
Co-Autoren:
Nikolas Dilger, Martin Krohm, Sebastian Melzig, Sabrina Zellmer
Fraunhofer IST
P5-061Analysis and Comparison of Interdependencies and Correlations of Input and Quality Parameters for Laser and Infrared Anode Drying at the Lithium-Ion Battery ProductionM.Sc. Raoul Höller
Co-Autoren:
Kristina Borzutzki
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB
P5-062Enhanced electrochemical discharge of Li-ion batteries for safe recyclingPhD Neha Garg
Co-Autoren:
Rodrigo Serna-Guerrero , Daniel Brandell , Annukka Santasalo-Aarnio
Aalto University
P5-063On Humidity Management and drying mechanisms in Battery Electrode ProcessingPhilipp Barbig
Co-Autoren:
Thilo Heckmann, Philip Scharfer, Wilhelm Schabel
Karlsruhe Insititute of Technology
P5-064Aqueous Processing ABC: How to Improve the Performance of Aqueous Processed Ni-rich Layered Oxide Cathodes by Additives, Binder and Coating? A Techno-ecological Study.M.Sc. Simon Albers
Co-Autoren:
Jens Timmermann, Julius Buchmann, Marcel Heidbüchel, Phillipp Voß, Martin Winter, Johannes Kasnatscheew
University of Münster | MEET Battery Research Center
P5-065Competitive and sustainable dry coating process for LFP battery electrodesValerij Kupreenko
Co-Autoren:
Jannes Ophey, Andreas Würsig, Holger Kapels
Fraunhofer Institute for Silicon Technology ISIT
P5-066Extrusion von Suspensionen für Lithium-Ionen-BatterieelektrodenPaul GüntherPowerCo
P5-067Optical measurements in mechanical sorting processes for battery recyclingDr. Regina KorengFraunhofer Institute for Ceramic Technologies and Systems IKTS
P5-068Recovery of Lithium from Waste Batteries via Resource-efficient Process: A Simulation-based StudyPhD Ashak Mahmud Parvez
Co-Autoren:
Jorge Torrubia, Felipe Garcia Paz
Helmholtz-Zentrum Dresden - Rossendorf e.V. (HZDR)
P5-069Regeneration of NCM811 as a Key Step in a Direct Recycling ProcessRazieh SaraniFraunhofer Institute for Silicate Research ISC
P5-070Evaluating Second-Use End-of-Life Strategies for Electric Vehicle Batteries in a Circular Economy using a techno-economic modelling approachAnne Christina Sehnal
Co-Autoren:
Jesper Frost Thomsen, Jannis Wesselkämper, Simon Lux
Universität Münster
P5-072Laser-based Dismantling of Battery PacksMax Rettenmeier
Co-Autoren:
Mauritz Möller
TRUMPF Laser- und Systemtechnik GmbH
P5-073Feasibility analysis of the automated dismantling process for the automotive traction batteries, including a comparative economic analysisJohannes FeikFFT Produktionssysteme GmbH & Co. KG
P5-074Impact of Inhomogeneous Temperature on the Cyclic Aging Behavior of Lithium-Ion BatteriesLisa Cloos
Co-Autoren:
Thomas Wetzel
Karlsruhe Institute of Technology (KIT)
P5-075Potential and Limitations of Research Battery Cell Types for Electrochemical Data AcquisitionDr. Anna Smith
Co-Autoren:
Dr. Pirmin Stüble, Dr. Lea Leuthner
Karlsruher Institut für Technologie
P5-076Closing the Loop for LiFePO4/Graphite Cells via a Direct Recycling RouteDr. Michael Hofmann
Co-Autoren:
M. Kapuschinski, R. Sarani, S. Eisert, C. Hübner, U. Guntow
Fraunhofer Institute for Silicate Research ISC
P5-077Recycling of Electrolyte from Lithium Ion Batteries: A Study on Supercritical Carbon Dioxide Extraction with Co-solventsJessica Ulke
Co-Autoren:
Marie Heidler, Jakob Hesper, Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center
P5-078Development of a Conceptual Framework for Automated Disassembly Processes of Lithium-ion Battery CellsShubiao Wu
Co-Autoren:
Shubiao Wu
TU Braunschweig, IWF
P5-079Room temperature fabrication of all-solid-state-battery components via powder aerosol depositionM.Sc. Mutlucan Sozak
Co-Autoren:
Lukas Hennerici, Maximilian Schamel, Mario Linz, Sofie Knies, Jaroslaw Kita, Matteo Bianchini, Michael A. Danzer, Ralf Moos
Universität Bayreuth
P5-080Wet Mechanical Treatment of Spent Lithium Ion Batteries - Analytical Insights into Contaminated Process WaterJulius Buchmann
Co-Autoren:
Stefan van Wickeren, Moritz Petzold, Sabine Flamme, Martin Winter, Sascha Nowak
MEET Battery Research Center - University of Münster
P5-081Secondary drying of electrodes before cell assembly via vacuum oven and roll-to-roll dryerM.Sc. Sebastian Lukas
Co-Autoren:
Hai Yen Tran, Hartmut Bruglachner, Wolfgang Braunwarth
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
P5-082Scalable ALD coatings for electrode foils – performance and protectionDr. Kristian Knemeyer
Co-Autoren:
Andrea Giraldo, Timothy Parks, Michael Reinke
BASF Coatings GmbH
P5-083Fully Automated Cell AssemblyDetlef GysauChemspeed Technologies AG
P5-084Innovative Mixing Processes for PFAS-free Production of Ni rich Li Ion CathodesMario Maunz
Co-Autoren:
A. Innocenti, R.-G. Scurtu, A. Hoffmann, M. Wohlfahrt-Mehrens, P. Axmann
ZSW - Zentrum für Sonnenenergie- und Wasserstoffforschung Baden-Württemberg
P5-085Preparation and characterization of 3d-porous Zn electrode by electrochemical methodsMarc Belenguer
Co-Autoren:
Bmarin@leitat.org, caucher@leitat.org, dmarti@leitat.org
Leitat
P5-001


Maya Strautmann
Co-Autoren:
Gereon Stahl M.Sc., Prof. Dr. rer. nat. Dirk Uwe Sauer
RWTH Aachen

Exploring Aging Mechanisms in Lithium-Ion Battery Cells: Correlating Floating Current with Traditional Ageing Indicators
P5-002


René Jagau
Co-Autoren:
P. Michalowski; A. Kwade


Impact of CMC and its Dosage Type on the Dispersing Process and the Cell Performance of Lithium-Ion Battery Anodes
P5-003


Prof. Dr.-Ing. Thomas Hofmann
Co-Autoren:
Annkatrin Ott-Schwenk, Christian Richter
Hochschule für Wirtschaft und Umwelt Nürtiingen-Geislingen

Potentials of waste from electric and electronic equipment (WEEE) - A case study on Discarded Mobile Phones
P5-004


Philip Gümbel
Co-Autoren:
Leif Tönjes, Maja Kandula, Klaus Dröder, Klaus Dilger
TU-Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik

Automated dismantling system for variant-flexible battery recycling
P5-005


Dr. Nicolaus Rehse
Collin Lab & Pilot Solutions GmbH

Polymer process technology for battery production
P5-006


Georg Nelke
OptiSense Gesellschaft für Optische Prozessmesstechnik mbH & Co. KG

Battery production – Automated quality assurance along the entire line
P5-008


Marcel Berling
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Quality-oriented and energy-reduced production technology for LIB and NextGen production in mini-environments
P5-009


Jakob Michael Hesper
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster

How the Sample Introduction Influences the Result: Identification of Electrolyte Residues in LIB Recycling Material via GC-MS
P5-010


Chirag Arunbhai Vankani
University of Münster | MEET Battery Research Center

Sustainable production of LiFePO4 – based positive electrodes by implementing aqueous processing with different binder systems
P5-011


Ph.D (Pursuing) Nitika Ghosh
Co-Autoren:
Dr. Alexander Warnecke
Indian Institute of Technology Delhi

State of Health Estimation of Lithium-Ion Batteries using Transfer Learning Strategies in Dynamic Operating Conditions for Cloud BMS
P5-012


M. Sc. Mechanical Engineering Sima Hellmers
Co-Autoren:
Hao Qiu, Marko Ranneberg, Harald Zetzener, Arno Kwade
TU Braunschweig/ Institute for Particle Technology

Lithium Recovery from Pyrometallurgical Slags through Dry Milling and Flotation
P5-013


Max Feinauer
Co-Autoren:
Gabriela Gerosa, Margret Wohlfahrt-Mehrens, Markus Hölzle, Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Temperature-Driven Path Dependence during cyclic aging of Li-Ion Batteries
P5-014


Anna Rollin
TU Braunschweig | elenia - Institute for High Voltage Technology and Energy Systems

Effects of Metal Oxalates from Recycling on Li-Ion-Batteries
P5-015


Sandro Süß
Co-Autoren:
Alexander Nickol; Wei Song; Regina Koreng; Dennis Beusen; Mark Mennenga; Bernd Friedrich; Alexander Michaelis; Arno Kwade; Christoph Herrmann
Technische Universität Braunschweig

Towards Effective Data Management in Battery Recycling
P5-016


Markus Eckstein
Co-Autoren:
Dariush Shabany; Kevin Pouls; Antje Fitzner; Daniel Becker; Joana Flanse; Lisa Angold
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Launch Management with dedicated Maturity Level Model
P5-017


Marie Heidler
Co-Autoren:
Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center

Optimizing Lithium Ion Battery Recycling: Electrolyte and Organic Binder Extraction via Supercritical Carbon Dioxide
P5-018


Carola Rindi
Co-Autoren:
Hannah Mittag, Raoul Höller
Fraunhofer Einrichtung Forschungsfertigung Batteriezelle

Infrared-drying in electrode manufacturing: Effects on lithium iron phosphate cathode properties
P5-021


MBA Guillermo Espiga
Nth Cycle

Innovative Metal Refining Leading a Sustainable Circular Economy
P5-023


Dipl.-Ing. Ronny Petersohn
Co-Autoren:
Klara Schwibs, Robin Grunau, Somyeong Park, Matthias Schelter
Hoppecke Rail Systems GmbH

Battery Diagnosis - from Field to Recycling Process
P5-024


Dr. Christopher Giehl
Co-Autoren:
Loredana Völker-Pop
Anton Paar Germany GmbH

Solutions for Battery Materials Characterization and Implications for the Process Chain
P5-025


Master of Science Mika Hellkuhl
Co-Autoren:
Bastian Heidrich, Martin Winter, Philip Niehoff
Universität Münster

Comprehensive Analysis of Systematically Accelerated Formation in 1 Ah Lithium Ion Battery Pouch Cells
P5-026


Michael Hinkers
Co-Autoren:
Sai Viswanath Kommineni, Kristina Borzutzki
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Understanding Cause-Effect-Relationships in Electrolyte Filling of Prismatic Lithium-Ion Battery Cells by Simulation
P5-027


M.Sc. Matthew Sleight
Co-Autoren:
Stefan Adami, Gauthier Vanderlinden, Mathieu Mulmann, Thomas Indinger
Technical University of Munich

Validation of a numerical model to test HV Batteries module leakage
P5-028


M.Sc. Matthew Sleight
Co-Autoren:
Stefan Adami, Mathieu Mulmann, Gauthier Vanderlinden, Thomas Indinger
Technical University of Munich

Validation of a numerical model to test High Voltage Batteries module leakage
P5-029


Christian Schiller
Co-Autoren:
Andreas Hasenfratz, Nicolas Wilhelm, Stephan Hoffmann, Achim Kraft
Fraunhofer Institute for Solar Energy Systems ISE

Non-destructive Weld Joint Analysis by Scanning Acoustic Microscopy and X-ray Absorption
P5-030


Matthias Smulka
RWTH Aachen University

Post-drying Technologies for Battery Cell Production: Comparison of Different Baking Technologies
P5-031


M.Sc. Daniel Nusko
Co-Autoren:
Tessa Krause, Luciana Pitta Bauermann, Matthias Vetter
Fraunhofer Institut für Solare Energiesysteme ISE

Investigation of the expansion of battery cells with chromatic confocal distance sensors under varying mechanical stress
P5-032


Mark Melvin Pradja
Co-Autoren:
Christian Modrzynski
Dechema Forschungsinstitut

Leaching of Cathode Materials by Electrochemical Generation of Peroxysulfate
P5-033


Niklas Penningh
Co-Autoren:
Robin Moschner, Arno Kwade
Technische Universität Braunschweig

Solvent-Reduced Continuous Processing of Lithium-Ion Battery Electrodes: Effects on Rheology, Morphology and Coating Quality
P5-034


Luca Stegemann
University of Münster

Environmental Impacts of Hydrometallurgical Recycling for NMC Batteries – A Review
P5-035


M.Sc. Nils Christian Hamacher
Co-Autoren:
Tom Hülsmann, Wilhelm Jaspers
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Integration of an expert system into the IT-architecture of a battery production plant
P5-036


associate professor Jiangong Zhu
Co-Autoren:
Weng Wenyuan ,You Heze ,Wei Xuezhe ,Dai Haifeng
Tongji University

Prediction of Lithium-ion Battery Cycle Life Using Nonlinear Decay Turnning Point
P5-037


Pankaj Chandan Solanki
Co-Autoren:
Luc H.J. Raijmakers, Dmitri L. Danilov, Peter H.L. Notten, Rüdiger -A. Eichel
Forschungszentrum Jülich GmbH

Synthesizing and Integration of a Thick Reference Electrode for Commercial Cylindrical Li-ion Batteries
P5-040


Ph.D. John Ostrander
Co-Autoren:
David Wragg, Preben J.S. Vie, Julia Wind, and Alexei Koposov
Institutt for energi teknology

Identifying key degradation patterns as a function of ageing temperature: A post-mortem study
P5-041


PhD Mateusz Skalon
Co-Autoren:
Dr. Henrique Brasil, Dr. Marius Kremer
Anton Paar GmbH

Characterizing Battery Material Performance and Sustainability: Insights from Particle Size and Shape Analysis
P5-042


Dr. Jochen Zausch
Co-Autoren:
Dariusz Niedziela, Dominik Becker, Stefan Rief, Konrad Steiner
Fraunhofer ITWM

Electrolyte wetting in the production of lithium ion batteries: a simulation approach
P5-043


M.Sc. Felix-Tom Möhlen
Co-Autoren:
M.Weber, C. Schilde, A. Kwade
Technische Universität Braunschweig, Institute for Particle Technology (iPAT)

Battery slurry production in batch processes – A study with CFD simulations
P5-044


Jonas Neumeyer
Zentrum Für Sonnenenergie- Und Wasserstoffforschung Baden-Württemberg

Preperation and characterization of extruded high-energy cathodes
P5-045


Merle Zorn
Co-Autoren:
Sigrid Hams, Sabine Flamme
FH Münster - Institute for Institute for Infrastructure · Water · Resources · Environment

Advanced Mechanical Treatment of Used Lithium-ion Batteries
P5-046


Xia ZENG
Co-Autoren:
Md Sazzad Hosen, Amir F. Samadi, Jiacheng He, Maitane Berecibar
Vrije Universiteit Brussel

Adaptive SoC estimation for second-life lithium-ion batteries in grid-scale applications
P5-047


Master of Science (M.Sc.) Henry Winner
Co-Autoren:
Nils Collath, Andreas Jossen
Technische Universität München

Lithium-Ion Batteries beyond the knee – Lifetime Extension via Alteration of Operating Conditions
P5-048


M. Sc. Lukas Kokozinski
Co-Autoren:
Max Niggestich, Robin Drees, Jonas Wieskamp, Florenz Janning
Fraunhofer Research Institution for Battery Cell Production FFB

Challenges of Simultaneous Factory, Plant and Process Planning for the Cell Finishing in Battery Cell Production
P5-049


Robin Drees
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Upscaling of Fast Charging Formation Strategies from Coin to Pouch Cells
P5-050


M. Eng. Christina Schieber
Co-Autoren:
Prof. Dr. Hans-Georg Schweiger
Technische Hochschule Ingolstadt

Mechanical stress and its effects on the expansion of Li-Ion cells: characteristics, consequences, and influence
P5-051


PhD Arjun Muralidharan
Aalto University

ELECTROCHEMICAL DISCHARGE OF LI-ION BATTERIES USING K2CO3 ELECTROLYTE: ANALYSIS OF DISCHARGE VOLTAGE, CURRENT AND pH
P5-053


M. Sc. Moritz Petzold
Co-Autoren:
Sigrid Hams, Sabine Flamme, Maximiliano A. Zenisch, Marc Vahnstiege, Sascha Nowak
FH Münster - Institute for Institute for Infrastructure · Water · Resources · Environment

Recycling Strategies for Spent Consumer Lithium-Ion Batteries
P5-054


Milena Lux
Co-Autoren:
Marcella Horst, Peter Michalowski, Arno Kwade
Technische Universität Braunschweig, Institut für Partikeltechnik

Processing of graphite anode via extrusion for dry coating of lithium-ion batteries
P5-055


Philipp Voß
Co-Autoren:
Benedikt Gruber, Miriam Mitterfellner, Jan-Darius Plöpst, Florian Degen, Richard Schmuch, Simon Lux
University of Münster

Can sodium-ion batteries challenge lithium-ion batteries in performance and sustainability? Combining energy density modelling and life cycle assessment
P5-056


Master of Science Tim Greitemeier
Co-Autoren:
Simon Lux
Universität Münster

The intellectual property enabling gigafactory battery cell production: An in-depth analysis of international patenting trends
P5-057


M.Sc. Franziska Beverborg
Co-Autoren:
M. Sc. Marcella Horst, Dr. rer. nat Peter Michalowski, Prof. Dr.-Ing. Arno Kwade
TU Braunschweig | Institut für Partikeltechnik

The influence of different graphite types on the dry coating of lithium-ion battery anodes
P5-059


Yao Lu
RWTH Aachen University

Censoring in Lithium-ion Battery Lifetime Testing
P5-060


Hannes Lefherz
Co-Autoren:
Nikolas Dilger, Martin Krohm, Sebastian Melzig, Sabrina Zellmer
Fraunhofer IST

Quantifying energy flows for life cycle assessment – Developing life cycle inventories for direct recycling processes
P5-061


M.Sc. Raoul Höller
Co-Autoren:
Kristina Borzutzki
Fraunhofer-Einrichtung Forschungsfertigung Batteriezelle FFB

Analysis and Comparison of Interdependencies and Correlations of Input and Quality Parameters for Laser and Infrared Anode Drying at the Lithium-Ion Battery Production
P5-062


PhD Neha Garg
Co-Autoren:
Rodrigo Serna-Guerrero , Daniel Brandell , Annukka Santasalo-Aarnio
Aalto University

Enhanced electrochemical discharge of Li-ion batteries for safe recycling
P5-063


Philipp Barbig
Co-Autoren:
Thilo Heckmann, Philip Scharfer, Wilhelm Schabel
Karlsruhe Insititute of Technology

On Humidity Management and drying mechanisms in Battery Electrode Processing
P5-064


M.Sc. Simon Albers
Co-Autoren:
Jens Timmermann, Julius Buchmann, Marcel Heidbüchel, Phillipp Voß, Martin Winter, Johannes Kasnatscheew
University of Münster | MEET Battery Research Center

Aqueous Processing ABC: How to Improve the Performance of Aqueous Processed Ni-rich Layered Oxide Cathodes by Additives, Binder and Coating? A Techno-ecological Study.
P5-065


Valerij Kupreenko
Co-Autoren:
Jannes Ophey, Andreas Würsig, Holger Kapels
Fraunhofer Institute for Silicon Technology ISIT

Competitive and sustainable dry coating process for LFP battery electrodes
P5-066


Paul Günther
PowerCo

Extrusion von Suspensionen für Lithium-Ionen-Batterieelektroden
P5-067


Dr. Regina Koreng
Fraunhofer Institute for Ceramic Technologies and Systems IKTS

Optical measurements in mechanical sorting processes for battery recycling
P5-068


PhD Ashak Mahmud Parvez
Co-Autoren:
Jorge Torrubia, Felipe Garcia Paz
Helmholtz-Zentrum Dresden - Rossendorf e.V. (HZDR)

Recovery of Lithium from Waste Batteries via Resource-efficient Process: A Simulation-based Study
P5-069


Razieh Sarani
Fraunhofer Institute for Silicate Research ISC

Regeneration of NCM811 as a Key Step in a Direct Recycling Process
P5-070


Anne Christina Sehnal
Co-Autoren:
Jesper Frost Thomsen, Jannis Wesselkämper, Simon Lux
Universität Münster

Evaluating Second-Use End-of-Life Strategies for Electric Vehicle Batteries in a Circular Economy using a techno-economic modelling approach
P5-072


Max Rettenmeier
Co-Autoren:
Mauritz Möller
TRUMPF Laser- und Systemtechnik GmbH

Laser-based Dismantling of Battery Packs
P5-073


Johannes Feik
FFT Produktionssysteme GmbH & Co. KG

Feasibility analysis of the automated dismantling process for the automotive traction batteries, including a comparative economic analysis
P5-074


Lisa Cloos
Co-Autoren:
Thomas Wetzel
Karlsruhe Institute of Technology (KIT)

Impact of Inhomogeneous Temperature on the Cyclic Aging Behavior of Lithium-Ion Batteries
P5-075


Dr. Anna Smith
Co-Autoren:
Dr. Pirmin Stüble, Dr. Lea Leuthner
Karlsruher Institut für Technologie

Potential and Limitations of Research Battery Cell Types for Electrochemical Data Acquisition
P5-076


Dr. Michael Hofmann
Co-Autoren:
M. Kapuschinski, R. Sarani, S. Eisert, C. Hübner, U. Guntow
Fraunhofer Institute for Silicate Research ISC

Closing the Loop for LiFePO4/Graphite Cells via a Direct Recycling Route
P5-077


Jessica Ulke
Co-Autoren:
Marie Heidler, Jakob Hesper, Martin Winter, Simon Wiemers-Meyer, Sascha Nowak
University of Münster | MEET Battery Research Center

Recycling of Electrolyte from Lithium Ion Batteries: A Study on Supercritical Carbon Dioxide Extraction with Co-solvents
P5-078


Shubiao Wu
Co-Autoren:
Shubiao Wu
TU Braunschweig, IWF

Development of a Conceptual Framework for Automated Disassembly Processes of Lithium-ion Battery Cells
P5-079


M.Sc. Mutlucan Sozak
Co-Autoren:
Lukas Hennerici, Maximilian Schamel, Mario Linz, Sofie Knies, Jaroslaw Kita, Matteo Bianchini, Michael A. Danzer, Ralf Moos
Universität Bayreuth

Room temperature fabrication of all-solid-state-battery components via powder aerosol deposition
P5-080


Julius Buchmann
Co-Autoren:
Stefan van Wickeren, Moritz Petzold, Sabine Flamme, Martin Winter, Sascha Nowak
MEET Battery Research Center - University of Münster

Wet Mechanical Treatment of Spent Lithium Ion Batteries - Analytical Insights into Contaminated Process Water
P5-081


M.Sc. Sebastian Lukas
Co-Autoren:
Hai Yen Tran, Hartmut Bruglachner, Wolfgang Braunwarth
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Secondary drying of electrodes before cell assembly via vacuum oven and roll-to-roll dryer
P5-082


Dr. Kristian Knemeyer
Co-Autoren:
Andrea Giraldo, Timothy Parks, Michael Reinke
BASF Coatings GmbH

Scalable ALD coatings for electrode foils – performance and protection
P5-083


Detlef Gysau
Chemspeed Technologies AG

Fully Automated Cell Assembly
P5-084


Mario Maunz
Co-Autoren:
A. Innocenti, R.-G. Scurtu, A. Hoffmann, M. Wohlfahrt-Mehrens, P. Axmann
ZSW - Zentrum für Sonnenenergie- und Wasserstoffforschung Baden-Württemberg

Innovative Mixing Processes for PFAS-free Production of Ni rich Li Ion Cathodes
P5-085


Marc Belenguer
Co-Autoren:
Bmarin@leitat.org, caucher@leitat.org, dmarti@leitat.org
Leitat

Preparation and characterization of 3d-porous Zn electrode by electrochemical methods

Partner und Veranstalter: